Rear Light Fuel Filler? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sadsack · 06-24-2007, 05:43 PM

Ok guys...it's me again!

I hope someone can help! I know there was a thread on this a while back by HuggerCST and I love the idea! Putting the fuel filler behind the rear tail light and hinging it to swing down. Didnt think Id ever be doing anything like that so I didnt pay much attention. Welllllll things change!

I have all the pics from HuggerCST's thread but cant tell if CST cut the inside of the stake pocket out (if you remove your light and look inthe hole left...the pocket is facing you) or just cut a hole in it and stuck the exhaust tubing through? Anyone else done this...or HuggerCST got anymore pics? I ordered a army surplus Blazer tank yesterday and am itching to get to work! Any pics or help would be greatly appreciated!!! I was gonna go with the side marker door but I think I like this one better!

grant's72 · 06-24-2007, 06:13 PM

this link mite help youhttp://www.classicheartbeat.com/mark...t_gas_door.htm

HuggerCST · 06-26-2007, 11:14 PM

Here are a few pics, but I didn't get one of the area behind the light before I welded it up. I wish that I would have, but at that time I wasn't sure that it would work. I did have to cut the 1/4 inch tabs off of each side, and some of the stake pocket shown in pic 1. Keep in mind that I did have to use the tail light trim to cover the area of metal that I had to remove at the bottom for clearance. If you have any questions, just ask, and I'll do my best.

Random Guy · 06-26-2007, 11:26 PM

Oh wow. That is so awesome. I have just changed my plans completely. Thanks!

HuggerCST · 06-26-2007, 11:34 PM

Thanks. Here's a few more. I also had to use LEDs to get rid of the bulb socket.

howell57 · 01-13-2019, 03:49 PM

Where did you get the LED's and again, what size filler tube did you use?

Chevelle454 · 06-26-2007, 11:38 PM

That would be sweet...

GREASEMONKEY72 · 06-27-2007, 06:15 AM

*****in dude

lofly'a · 06-27-2007, 08:47 AM

i have a couple questions HuggerCST? what kind of filler mechanism is that, it is compact and cool, and what holds the door closed, is it held by magnet, screw, or spring loaded? that is one of if not the slickest setup for taillight fill i've seen yet.

HuggerCST · 06-27-2007, 09:45 AM

The filler is a marine deck filler that I modified. http://www.westmarine.com/webapp/wcs...3&classNum=204
Since I did this another member(Bamm) found one that mounts at an angle, is much cheaper, and looks like it would work better, but I don't have any pics of it. Maybe he will see this and give us more info. I used a universal throttle spring (see the yellow arrows in the pics below) that is mounted at an angle so that it cams over and then holds it open, or closed. I think it needs a little more tension, but I haven't changed it yet. Thanks for the compliments.

lofly'a · 06-27-2007, 11:36 AM

thanks for the info. i will be using leds also.

HuggerCST · 06-27-2007, 12:57 PM

Here's Bamm's filler neck. http://cgi.ebay.com/ebaymotors/STAIN...spagenameZWDVW

howell57 · 01-13-2019, 03:53 PM

Is there a brand name on that filler you got off EBay. Looked , but couldn't find one exactly like that.

Andy4639 · 01-13-2019, 04:19 PM

New creations in Shelby NC makes these and he sells them through his dad's business at Tommy's truck parts in Shelby. Very good people and they all are 67-72 truck guy's as well.

https://www.facebook.com/search/top/...epa=SEARCH_BOX

68Blu · 11-11-2019, 01:06 PM

[QUOTE=Andy4639;8442543]New creations in Shelby NC makes these and he sells them through his dad's business at Tommy's truck parts in Shelby. Very good people and they all are 67-72 truck guy's as well.

https://www.facebook.com/search/top/...epa=SEARCH_BOX

Has anyone tried one of these kits yet? Thanks

HeavyHauler · 12-28-2019, 07:48 PM

I am thinking about purchasing one of these so I am also interested to see if anybody else has installed one of the rear tail light fuel fillers from Newcreations?

**AussieinNC** · 12-28-2019, 09:26 PM

[quote=68Blu;8625133]

Quote:

Originally Posted by Andy4639

New creations in Shelby NC makes these and he sells them through his dad's business at Tommy's truck parts in Shelby. Very good people and they all are 67-72 truck guy's as well.

https://www.facebook.com/search/top/...epa=SEARCH_BOX

Has anyone tried one of these kits yet? Thanks

It is my understanding that Tommy has closed the business in Shelby....and "retired".
Maybe someone has more info...

72BlckButy · 06-27-2007, 01:59 PM

Sadsack...would you be able to provide the link to the build thread? Or could someone else point me in the right direction.

72hotrod · 06-27-2007, 07:48 PM

Hey, HuggerCST, that's some fine work! Does the fill work OK at 1 1/2" or does it burp back some? Did you add a vent tube to the nipple, or is it OK as is? If you had a do-over, would it be worth it to try to fit a 2" ? Thanks for your input, I can only aspire to that level of craftsmanship! My problem is that I am the worst mechanic I know, but the only one I use.

HuggerCST · 06-27-2007, 10:07 PM

I still don't have the truck on the road, so I haven't tried to fill it yet.(that will be the true test) I started with a 2" filler, but the working space is pretty tight, and my tank neck was 1 & 1/2", so I changed to the smaller one. I did add a vent tube to the filler with a 1/4" pipe elbow and some rubber fuel line going back to the tank. I still have to figure out what to use as a tank vent. Anybody know of a good one? I was planning to use a blazer tank, but it hangs a little low, and the filler comes out in the wrong place, so I've decided to get Fuelcellguy to build me one. If I was to do it again, I'd probably try a angled filler like Bamm's, and I will either find a stiffer spring, or I might add a magnetic latch to keep this one closed tight. I don't think it would come open, but as it is now, it may bounce a little, and I'm not sure how tough the LEDs are. My craftmanship leaves something to be desired, but I cover it up well.

Bamm · 06-27-2007, 10:16 PM

Hey guys. You know what I know as of right now. I bought my filler off ebay a few months ago and haven't progressed far enough on the truck to start the fab work on it. I'll be taking a lot of direction from Hugger and his work. I'll keep you posted but it's looking like 4-6 weeks before I get to that stage.........Jerry

**SactoJim** · 06-29-2007, 12:25 AM

Hell of a job on that filler........looks like it could've come that way!

Mordachai · 07-20-2007, 10:57 PM

huggercst- your mod looks great. Wish I would have known about those LEDs when I did my tankfiller. mine is a little more clearance limited cause I worked with the stock light, and I also re-used the in-cab filler, just welded a few pieces of stainless together to get around the curve.

The tank I used is the brothers tank, and it had a vent on it. I wasn't sure if I would need it or not, and I use the truck weekly to haul stuff for my nursery, just with a bedliner hanging in there, haha.
But yeah, I needed to vent mine to not have to trickle fill it, so you might have to as well huggercst. Oh, what was your inspiration for out your fill there? Mine was the old bel-airs!

But yeah, I admire your craftmanship with the spring latch and clean fill area. I still need to finish boxing mine in!

krue · 07-21-2007, 03:22 AM

Yank's also done this mod and his truck is on the road, maybe he'll chime in.

ChevLoRay · 07-21-2007, 09:28 AM

When it's on the road, splurge and go to a full-service station and tell 'em to "fill 'er up". Have a camera handy that can video their actions.

I remember when we'd get someone new at the station I worked at "back in the day", and a '56 or 57 Chevy came in for gas. A lot of FoMoCo's had them behind the license plate....and if the car had a Continental kit on it and you had to swing the spare out of the way, it got interesting.

Nice work, man. I like the LED's, too.

06-24-2007, 05:43 PM	#1
Sadsack Registered User Join Date: May 2007 Location: East TN Posts: 171	Rear Light Fuel Filler? Ok guys...it's me again! I hope someone can help! I know there was a thread on this a while back by HuggerCST and I love the idea! Putting the fuel filler behind the rear tail light and hinging it to swing down. Didnt think Id ever be doing anything like that so I didnt pay much attention. Welllllll things change! I have all the pics from HuggerCST's thread but cant tell if CST cut the inside of the stake pocket out (if you remove your light and look inthe hole left...the pocket is facing you) or just cut a hole in it and stuck the exhaust tubing through? Anyone else done this...or HuggerCST got anymore pics? I ordered a army surplus Blazer tank yesterday and am itching to get to work! Any pics or help would be greatly appreciated!!! I was gonna go with the side marker door but I think I like this one better! Last edited by Sadsack; 06-24-2007 at 06:59 PM.

06-24-2007, 06:13 PM	#2
grant's72 Registered User Join Date: Sep 2006 Location: iowa Posts: 33	Re: Rear Light Fuel Filler? this link mite help youhttp://www.classicheartbeat.com/mark...t_gas_door.htm

06-26-2007, 11:14 PM	#3
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Rear Light Fuel Filler? Here are a few pics, but I didn't get one of the area behind the light before I welded it up. I wish that I would have, but at that time I wasn't sure that it would work. I did have to cut the 1/4 inch tabs off of each side, and some of the stake pocket shown in pic 1. Keep in mind that I did have to use the tail light trim to cover the area of metal that I had to remove at the bottom for clearance. If you have any questions, just ask, and I'll do my best. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 06-26-2007 at 11:20 PM.

06-26-2007, 11:26 PM	#4
Random Guy Registered User Join Date: Feb 2007 Location: Tyler, Texas Posts: 119	Re: Rear Light Fuel Filler? Oh wow. That is so awesome. I have just changed my plans completely. Thanks! __________________ CARPE CERVASIUM! 1968 C10 Fleetside LWB Remember Cthulu is watching you! / (@) (@) \

06-26-2007, 11:34 PM	#5
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Rear Light Fuel Filler? Thanks. Here's a few more. I also had to use LEDs to get rid of the bulb socket. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-13-2019, 03:49 PM	#6
howell57 Registered User Join Date: Sep 2018 Location: Redding, Calif. Posts: 101	Re: Rear Light Fuel Filler? Where did you get the LED's and again, what size filler tube did you use?

06-26-2007, 11:38 PM	#7
Chevelle454 Registered User Join Date: Aug 2003 Location: MN Posts: 380	Re: Rear Light Fuel Filler? That would be sweet... __________________ 1972 C10 1972 C20

06-27-2007, 06:15 AM	#8
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Rear Light Fuel Filler? *****in dude __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

06-27-2007, 08:47 AM	#9
lofly'a Registered User Join Date: May 2000 Location: Alexandria, LA 71301 Posts: 1,451	Re: Rear Light Fuel Filler? i have a couple questions HuggerCST? what kind of filler mechanism is that, it is compact and cool, and what holds the door closed, is it held by magnet, screw, or spring loaded? that is one of if not the slickest setup for taillight fill i've seen yet. __________________ -02 avalanche (daily driver) -66 gto ragtop 389/400 (garage queen, hand-me-down from dad) -72 Tribute Trans Am (6.0LS/T56 6-speed) in progress -2003 YUKON (Wife's) -71 gmc swb fleet (current project, gonna shave everything, bags, stuff w/ 20's, gen III powertrain) -48 3100 SWB - 12/31/23 LONG TERM Project

06-27-2007, 09:45 AM	#10
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Rear Light Fuel Filler? The filler is a marine deck filler that I modified. http://www.westmarine.com/webapp/wcs...3&classNum=204 Since I did this another member(Bamm) found one that mounts at an angle, is much cheaper, and looks like it would work better, but I don't have any pics of it. Maybe he will see this and give us more info. I used a universal throttle spring (see the yellow arrows in the pics below) that is mounted at an angle so that it cams over and then holds it open, or closed. I think it needs a little more tension, but I haven't changed it yet. Thanks for the compliments. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 06-27-2007 at 01:01 PM.

06-27-2007, 11:36 AM	#11
lofly'a Registered User Join Date: May 2000 Location: Alexandria, LA 71301 Posts: 1,451	Re: Rear Light Fuel Filler? thanks for the info. i will be using leds also. __________________ -02 avalanche (daily driver) -66 gto ragtop 389/400 (garage queen, hand-me-down from dad) -72 Tribute Trans Am (6.0LS/T56 6-speed) in progress -2003 YUKON (Wife's) -71 gmc swb fleet (current project, gonna shave everything, bags, stuff w/ 20's, gen III powertrain) -48 3100 SWB - 12/31/23 LONG TERM Project

06-27-2007, 12:57 PM	#12
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Rear Light Fuel Filler? Here's Bamm's filler neck. http://cgi.ebay.com/ebaymotors/STAIN...spagenameZWDVW Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 06-27-2007 at 12:59 PM.

01-13-2019, 03:53 PM	#13
howell57 Registered User Join Date: Sep 2018 Location: Redding, Calif. Posts: 101	Re: Rear Light Fuel Filler? Is there a brand name on that filler you got off EBay. Looked , but couldn't find one exactly like that.

01-13-2019, 04:19 PM	#14
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Rear Light Fuel Filler? New creations in Shelby NC makes these and he sells them through his dad's business at Tommy's truck parts in Shelby. Very good people and they all are 67-72 truck guy's as well. https://www.facebook.com/search/top/...epa=SEARCH_BOX __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-11-2019, 01:06 PM	#15
68Blu Registered User Join Date: Jun 2019 Location: California Central Coast Posts: 82	Re: Rear Light Fuel Filler? [QUOTE=Andy4639;8442543]New creations in Shelby NC makes these and he sells them through his dad's business at Tommy's truck parts in Shelby. Very good people and they all are 67-72 truck guy's as well. https://www.facebook.com/search/top/...epa=SEARCH_BOX Has anyone tried one of these kits yet? Thanks



Register or Log In To remove these advertisements.

12-28-2019, 07:48 PM	#16
HeavyHauler Registered User Join Date: Nov 2011 Location: USA Posts: 401	Re: Rear Light Fuel Filler? I am thinking about purchasing one of these so I am also interested to see if anybody else has installed one of the rear tail light fuel fillers from Newcreations?

06-27-2007, 01:59 PM	#18
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Rear Light Fuel Filler? Sadsack...would you be able to provide the link to the build thread? Or could someone else point me in the right direction. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

06-27-2007, 07:48 PM	#19
72hotrod Registered User Join Date: Mar 2004 Location: Red Chute,LA Posts: 62	Re: Rear Light Fuel Filler? Hey, HuggerCST, that's some fine work! Does the fill work OK at 1 1/2" or does it burp back some? Did you add a vent tube to the nipple, or is it OK as is? If you had a do-over, would it be worth it to try to fit a 2" ? Thanks for your input, I can only aspire to that level of craftsmanship! My problem is that I am the worst mechanic I know, but the only one I use.

06-27-2007, 10:07 PM	#20
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Rear Light Fuel Filler? I still don't have the truck on the road, so I haven't tried to fill it yet.(that will be the true test) I started with a 2" filler, but the working space is pretty tight, and my tank neck was 1 & 1/2", so I changed to the smaller one. I did add a vent tube to the filler with a 1/4" pipe elbow and some rubber fuel line going back to the tank. I still have to figure out what to use as a tank vent. Anybody know of a good one? I was planning to use a blazer tank, but it hangs a little low, and the filler comes out in the wrong place, so I've decided to get Fuelcellguy to build me one. If I was to do it again, I'd probably try a angled filler like Bamm's, and I will either find a stiffer spring, or I might add a magnetic latch to keep this one closed tight. I don't think it would come open, but as it is now, it may bounce a little, and I'm not sure how tough the LEDs are. My craftmanship leaves something to be desired, but I cover it up well. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

06-27-2007, 10:16 PM	#21
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Re: Rear Light Fuel Filler? Hey guys. You know what I know as of right now. I bought my filler off ebay a few months ago and haven't progressed far enough on the truck to start the fab work on it. I'll be taking a lot of direction from Hugger and his work. I'll keep you posted but it's looking like 4-6 weeks before I get to that stage.........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

06-29-2007, 12:25 AM	#22
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Rear Light Fuel Filler? Hell of a job on that filler........looks like it could've come that way! __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

07-20-2007, 10:57 PM	#23
Mordachai Fat Fendered Fleetside Join Date: Nov 2004 Location: WPB, S. FL, USA, Earth Posts: 718	Re: Rear Light Fuel Filler? huggercst- your mod looks great. Wish I would have known about those LEDs when I did my tankfiller. mine is a little more clearance limited cause I worked with the stock light, and I also re-used the in-cab filler, just welded a few pieces of stainless together to get around the curve. The tank I used is the brothers tank, and it had a vent on it. I wasn't sure if I would need it or not, and I use the truck weekly to haul stuff for my nursery, just with a bedliner hanging in there, haha. But yeah, I needed to vent mine to not have to trickle fill it, so you might have to as well huggercst. Oh, what was your inspiration for out your fill there? Mine was the old bel-airs! But yeah, I admire your craftmanship with the spring latch and clean fill area. I still need to finish boxing mine in! __________________ 71 GMC lwb 56 Big window swb 93 GMC Sonoma (dd) radiused fiberglass fender project for 67-72

07-21-2007, 03:22 AM	#24
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Rear Light Fuel Filler? Yank's also done this mod and his truck is on the road, maybe he'll chime in. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

07-21-2007, 09:28 AM	#25
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Rear Light Fuel Filler? When it's on the road, splurge and go to a full-service station and tell 'em to "fill 'er up". Have a camera handy that can video their actions. I remember when we'd get someone new at the station I worked at "back in the day", and a '56 or 57 Chevy came in for gas. A lot of FoMoCo's had them behind the license plate....and if the car had a Continental kit on it and you had to swing the spare out of the way, it got interesting. Nice work, man. I like the LED's, too. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

Register or Log In To remove these advertisements.