LA Porterbuilt Tubular Control Arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 11-25-2012, 06:14 PM

I hate to do this, buuuuuuuuut, I have other pressing priorities.

So, here's a set of Porterbuilt tubular lower control arms, brand slappin' new, with fresh satin black powder coat. These can be used for airbags or coil springs by using the included billet coil spring retainers (a $50 upgrade). Includes new 73-87 C10 lower balljoints, but will accept 63-72 as well. These are the 1" forward version, which move the lower balljoint forward to improve caster as well as help to center the front wheel in the opening on lowered trucks.

These retail for $550, plus the $50 coil retainers, and ~$50 worth of professional powdercoating = $650.

Lowers only, as pictured, brand new, never installed.

$500 plus shipping

hvacfatboy · 11-25-2012, 09:29 PM

hey do you know if these are the same for 2wd blazers 72. if so i will take and can you price shipping to 27583 thanks richie

gringoloco · 11-25-2012, 10:12 PM

They are. You will need 71-72 specific ball joints, but otherwise, they're a direct fit. I have you down as first interest--I will work on a shipping quote ASAP.

EDIT: shipping cost via UPS.com is estimated $55

hvacfatboy · 11-25-2012, 10:26 PM

one last question will they fit the factory crossmemeber or are they for dropmembers. if factory then i want them for sure and you can send me payment info by pm or email hvacfatboy@embarqmail.com thanks

gringoloco · 11-25-2012, 10:48 PM

They fit factory crossmembers. PM sent.

budnikguy · 11-25-2012, 11:27 PM

Next in line...
Posted via Mobile Device

**lolife99** · 11-26-2012, 01:41 AM

gringo,... 71-72 trucks and 73-87 trucks share the same lower ball joint.
So these are a bolt-on for the 71-72 trucks as well.
Posted via Mobile Device

gringoloco · 11-26-2012, 01:51 AM

Doh! That's right. Only uppers differ... Thanks lolife

Waiting for a response from hvac, keeping tabs on other interest- will let you guys know...
Posted via Mobile Device

gringoloco · 11-26-2012, 11:57 PM

Sold to hvac
Posted via Mobile Device

hvacfatboy · 12-05-2012, 12:17 PM

hey gringoloco i recieved the lower control arms today they look very nice thank you. I have one question are these the forward arms

hvacfatboy · 12-05-2012, 12:19 PM

sorry gringo i just found out that they are the forward arms thanks again Richie

gringoloco · 12-05-2012, 06:11 PM

Yep, they're forwards. Glad they made it safely

11-25-2012, 06:14 PM	#1
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Porterbuilt Tubular Control Arms I hate to do this, buuuuuuuuut, I have other pressing priorities. So, here's a set of Porterbuilt tubular lower control arms, brand slappin' new, with fresh satin black powder coat. These can be used for airbags or coil springs by using the included billet coil spring retainers (a $50 upgrade). Includes new 73-87 C10 lower balljoints, but will accept 63-72 as well. These are the 1" forward version, which move the lower balljoint forward to improve caster as well as help to center the front wheel in the opening on lowered trucks. These retail for $550, plus the $50 coil retainers, and ~$50 worth of professional powdercoating = $650. Lowers only, as pictured, brand new, never installed. $500 plus shipping __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-25-2012, 09:29 PM	#2
hvacfatboy Registered User Join Date: Oct 2011 Location: Timberlake NC Posts: 397	Re: Porterbuilt Tubular Control Arms hey do you know if these are the same for 2wd blazers 72. if so i will take and can you price shipping to 27583 thanks richie

11-25-2012, 10:12 PM	#3
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Porterbuilt Tubular Control Arms They are. You will need 71-72 specific ball joints, but otherwise, they're a direct fit. I have you down as first interest--I will work on a shipping quote ASAP. EDIT: shipping cost via UPS.com is estimated $55 __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 11-25-2012 at 10:28 PM.

11-25-2012, 10:26 PM	#4
hvacfatboy Registered User Join Date: Oct 2011 Location: Timberlake NC Posts: 397	Re: Porterbuilt Tubular Control Arms one last question will they fit the factory crossmemeber or are they for dropmembers. if factory then i want them for sure and you can send me payment info by pm or email hvacfatboy@embarqmail.com thanks

11-25-2012, 10:48 PM	#5
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Porterbuilt Tubular Control Arms They fit factory crossmembers. PM sent. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-25-2012, 11:27 PM	#6
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Porterbuilt Tubular Control Arms Next in line... Posted via Mobile Device

11-26-2012, 01:41 AM	#7
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,691	Re: Porterbuilt Tubular Control Arms gringo,... 71-72 trucks and 73-87 trucks share the same lower ball joint. So these are a bolt-on for the 71-72 trucks as well. Posted via Mobile Device __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-26-2012, 01:51 AM	#8
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Porterbuilt Tubular Control Arms Doh! That's right. Only uppers differ... Thanks lolife Waiting for a response from hvac, keeping tabs on other interest- will let you guys know... Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-26-2012, 11:57 PM	#9
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Porterbuilt Tubular Control Arms Sold to hvac Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-05-2012, 12:17 PM	#10
hvacfatboy Registered User Join Date: Oct 2011 Location: Timberlake NC Posts: 397	Re: Porterbuilt Tubular Control Arms hey gringoloco i recieved the lower control arms today they look very nice thank you. I have one question are these the forward arms

12-05-2012, 12:19 PM	#11
hvacfatboy Registered User Join Date: Oct 2011 Location: Timberlake NC Posts: 397	Re: Porterbuilt Tubular Control Arms sorry gringo i just found out that they are the forward arms thanks again Richie

12-05-2012, 06:11 PM	#12
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Porterbuilt Tubular Control Arms Yep, they're forwards. Glad they made it safely __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.