NH WTB - K10 Clutch Push Rod

[ohboy321]

I am looking for a K10 clutch push rod. These are longer than the non-4WD version. Below is a picture of the length needed.

Thanks

[chevycc1970]

I ran into the same thing and couldn't find one. Just get a piece of 3/8" round stock and thread the end and weld a 3/8" shaft collar on the other end. It works flawlessly.

[ohboy321]

Originally Posted by chevycc1970

I ran into the same thing and couldn't find one. Just get a piece of 3/8" round stock and thread the end and weld a 3/8" shaft collar on the other end. It works flawlessly.

Thanks for the tip. I've looked through old posts and it does seem like they are hard to come by. Since I have the clutch linkage apart, I figured I would post a WTB out there to see if I get lucky.

Anyone have a picture of a 2WD version? I don't know what it is supposed to look like, but I am sure I can improve on what I have now.

[CUSTOM/10]

I have a couple of these that I believe are from 4x4's but measure 13-1/2". They came from trucks with 292's, so they might be specific to engine type & application.

Gary

[ohboy321]

Originally Posted by CUSTOM/10

I have a couple of these that I believe are from 4x4's but measure 13-1/2". They came from trucks with 292's, so they might be specific to engine type & application.

Gary

Looking at my picture, if I measured from the left side where it attaches the 13-1/2" looks like the correct length...with a little to spare for taking up the slack.

I'd be interest in taking a look at what you have. Possibly another part for local pickup!!!

-Steve

[gmc 2500 4x4]

4x4 are threaded on both ends i think, i'll look at mine today

[gmc 2500 4x4]

here is what i have on my 69 3/4ton 402, its 11'' long, threaded both ends with plenty adjustment, sm465

[ohboy321]

Originally Posted by gmc 2500 4x4

here is what i have on my 69 3/4ton 402, its 11'' long, threaded both ends with plenty adjustment, sm465

Thanks for the pictures and link. I'm thinking that the 13-1/2 inch that CUSTOM/10 has may do the trick.

-Steve

[CUSTOM/10]

I'll try and post pictures of both items tonight.

[CUSTOM/10]

Here are the 2 clutch rods I have !

[ohboy321]

Originally Posted by CUSTOM/10

Here are the 2 clutch rods I have !

Those both look good and I am interested. What is the asking price for the bottom one in your picture?

-Steve

[gmc 2500 4x4]

http://67-72chevytrucks.com/vboard/s...d.php?t=784884