IA more cleaning the shelves - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MJN** · 06-06-2021, 06:15 PM

Prices dropped again, need this stuff to go- all prices are plus shipping, check or money order please- make an offer on any of it
I can get better/close up pictures upon request.

SBC A/C compressor brackets $15
79-82 SBC P/S pump brackets w/ A/C $5
Turn signal housings $1/pair
Turn signal lens $1
Turn signal lens trim $1/pair
Green door panel with factory speaker $18
Tan door panel $1
serpentine pulleys and bracket $30
auto trans detent cable $4
long throttle cable- think it is for a 250-six cyl. $5
low note horn- tested and works $2
plastic under steering column trim $1
polyurethane Pro-thane transfer case torque mount bushings $15
73-77 (?) inside door handle and rubber insulator $2
emblems $5 each (Custom Deluxe has a screw hole in it)
Dana 44 chrome drive flange dust cap $3
Lots of trim (some reproduction and some original)

*added seatbelts in post #9*

Probably more to come as I dig it out

**MJN** · 06-06-2021, 06:18 PM

serpentine brackets

BASE · 06-09-2021, 11:10 AM

I could use the power steering brackets. PM sent.

69Tom · 06-09-2021, 12:16 PM

Are the front curved trim section originals? Depending on price I might be interested. PM sent.

**MJN** · 06-09-2021, 01:04 PM

Quote:

Originally Posted by 69Tom

Are the front curved trim section originals? Depending on price I might be interested. PM sent.

The pair in the top are aftermarket (LMC) and the pair in the bottom are used original GM. $10/pair sound good?

69Tom · 06-09-2021, 01:06 PM

Quote:

Originally Posted by MJN

The pair in the top are aftermarket (LMC) and the pair in the bottom are used original GM. $10/pair sound good?

Sure, that'll do. I'll take the GM. Shipping to Phoenix 85004. Shoot me a message with a total and how to pay.

Thanks!

**MJN** · 06-09-2021, 07:28 PM

Quote:

Originally Posted by 69Tom

Sure, that'll do. I'll take the GM. Shipping to Phoenix 85004. Shoot me a message with a total and how to pay.

Thanks!

Thanks PM sent

69Tom · 06-09-2021, 07:39 PM

Quote:

Originally Posted by MJN

Thanks PM sent

All paid. Thanks.

**MJN** · 07-15-2021, 09:46 AM

ttt

favor · 07-16-2021, 09:50 AM

Belts ship 33993 total

**MJN** · 07-16-2021, 09:58 AM

Quote:

Originally Posted by favor

Belts ship 33993 total

PM sent
thanks

**MJN** · 07-18-2021, 11:08 AM

ttt- belts still available

**Hart_Rod** · 08-05-2021, 09:43 AM

Would you happen to have any more power steering pump brackets?

**MJN** · 08-07-2021, 12:34 PM

Quote:

Originally Posted by Hart_Rod

Would you happen to have any more power steering pump brackets?

Sorry for the late reply- I'll have to check, if I do they might still be on a pump.

**Hart_Rod** · 08-07-2021, 02:46 PM

Quote:

Originally Posted by MJN

Sorry for the late reply- I'll have to check, if I do they might still be on a pump.

Thank you!

**MJN** · 08-07-2021, 03:09 PM

Quote:

Originally Posted by Hart_Rod

Thank you!

I have these if they are the ones you're looking for.

**Hart_Rod** · 08-07-2021, 07:35 PM

Quote:

Originally Posted by MJN

I have these if they are the ones you're looking for.

I think that is the earlier pump. Thanks for looking!

**MJN** · 08-25-2021, 01:34 PM

ttt

**MJN** · 08-30-2021, 12:06 PM

reduced prices

NvrDun71 · 09-03-2021, 12:34 AM

Any swb upper bedside trim in the trim pile by chance? Also need pass lower trim piece

**MJN** · 09-03-2021, 08:48 AM

Quote:

Originally Posted by NvrDun71

Any swb upper bedside trim in the trim pile by chance? Also need pass lower trim piece

Sorry, no shortbed pieces, all long bed.

NvrDun71 · 09-06-2021, 05:24 PM

Quote:

Originally Posted by MJN

Sorry, no shortbed pieces, all long bed.

Any door pieces upper and lower?

**MJN** · 09-10-2021, 09:07 AM

Quote:

Originally Posted by NvrDun71

Any door pieces upper and lower?

I have upper and lowers for both doors- not perfect but usable. $5 + shipping and Paypal fees

**72BBGMC** · 12-05-2021, 07:31 PM

Quote:

Originally Posted by MJN

reduced prices

How much for the ac brackets? shipping to 30252?
Thanks

**MJN** · 12-06-2021, 10:50 AM

Quote:

Originally Posted by 72BBGMC

How much for the ac brackets? shipping to 30252?
Thanks

In the first post it says they're $45. PM Sent with shipping and total if you still want them.

06-06-2021, 06:15 PM	#1
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,046	more cleaning the shelves Prices dropped again, need this stuff to go- all prices are plus shipping, check or money order please- make an offer on any of it I can get better/close up pictures upon request. SBC A/C compressor brackets $15 79-82 SBC P/S pump brackets w/ A/C $5 Turn signal housings $1/pair Turn signal lens $1 Turn signal lens trim $1/pair Green door panel with factory speaker $18 Tan door panel $1 serpentine pulleys and bracket $30 auto trans detent cable $4 long throttle cable- think it is for a 250-six cyl. $5 low note horn- tested and works $2 plastic under steering column trim $1 polyurethane Pro-thane transfer case torque mount bushings $15 73-77 (?) inside door handle and rubber insulator $2 emblems $5 each (Custom Deluxe has a screw hole in it) Dana 44 chrome drive flange dust cap $3 Lots of trim (some reproduction and some original) added seatbelts in post #9 Probably more to come as I dig it out Attached Images __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com Last edited by MJN; 06-21-2024 at 10:18 AM.

06-06-2021, 06:18 PM	#2
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,046	Re: more cleaning the shelves serpentine brackets Attached Images __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

06-09-2021, 11:10 AM	#3
BASE Registered User Join Date: Oct 2016 Location: St Louis, MO Posts: 194	Re: more cleaning the shelves I could use the power steering brackets. PM sent.

06-09-2021, 12:16 PM	#4
69Tom Registered User Join Date: Jul 2015 Location: Phoenix, AZ Posts: 1,335	Re: more cleaning the shelves Are the front curved trim section originals? Depending on price I might be interested. PM sent.

07-16-2021, 09:50 AM	#10
favor Registered User Join Date: Sep 2015 Location: cape coral,FL Posts: 80	Re: more cleaning the shelves Belts ship 33993 total

07-15-2021, 09:46 AM	#9
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,046	Re: more cleaning the shelves ttt __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

07-18-2021, 11:08 AM	#12
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,046	Re: more cleaning the shelves ttt- belts still available __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

08-05-2021, 09:43 AM	#13
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,860	Re: more cleaning the shelves Would you happen to have any more power steering pump brackets? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

08-25-2021, 01:34 PM	#18
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,046	Re: more cleaning the shelves ttt __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

08-30-2021, 12:06 PM	#19
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,046	Re: more cleaning the shelves reduced prices __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

09-03-2021, 12:34 AM	#20
NvrDun71 Registered User Join Date: Sep 2016 Location: Cypress, Tx Posts: 79	Re: more cleaning the shelves Any swb upper bedside trim in the trim pile by chance? Also need pass lower trim piece



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.