![]() |
|
![]() |
#1 |
Carolina Cajun
Join Date: Mar 2002
Location: Concord, NC/Ponchatoula, LA
Posts: 65
|
![]()
Anyone have any experience building a trailer using a fleetside bed and the rear axle and frame?
Keeping the tongue and axle perpindicular is important. Anything else to worry about? Joe
__________________
The Carolina Cajun, almost famous in North Carolina since 1989! Driving a 68 & Restoring a 66. Lookin' for Rochester Manual 1bbl & 2bbl carbs!! Concord, NC & Ponchatoula, LA |
![]() |
![]() |
![]() |
#2 |
Recovering Truck Driver
Join Date: Mar 2002
Location: Orleans, NE USA
Posts: 1,883
|
I built one last summer out of a 57 F#rd short fleet. I used the tounge out of an old disc I have out here. The hitch is nice and long, so it pulls great and is easy to back up. I screwed it up though, I welded the tounge inside the frame rails and should have welded it to the bottom.....it looks like it's going downhill big time. That's about all I can tell you other than to make it stout.
__________________
67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska |
![]() |
![]() |
![]() |
Bookmarks |
|
|