While I'm Waiting... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*78 Chevyrado* · 10-03-2008, 12:25 AM

Here's the FINISHED thread now it's all done.
http://67-72chevytrucks.com/vboard/s...=1#post2963839

Here's how the truck used to look; all original (even paint) except for wheels, seats and console, and new grille:

Here's a pic of the wreck that started the whole rebuild:

Had to rebuild the front end all the way to the steering box, so everything from there is new, including a lower RH Control arm.

While rebuilding the front end I swapped in a new set of HD Front coils and raised the front at least 2 inches. Then I had to get a set of 1.5 lift blocks for the rear. Here's how the lift looks:

Here's the truck, stripped and ready for the body shop:

New Seam Sealer:

This is the ONLY Rust hole in the whole truck

*78 Chevyrado* · 10-03-2008, 12:25 AM

The truck is off at the bodyshop getting painted, inside and out.
Here's where it's at now:

While I'm Waiting, Here's some stuff I've gotten done for when I get it back.

Here's a before and after rebuilding the vent windows:

Finished vent windows and repainted and polished headlight buckets:

Cleaned up and polished cluster and ac controls:

Kinda out of order but here's the stripped and repainted trailer receiver:

*78 Chevyrado* · 10-03-2008, 12:26 AM

All the interior vinyl and plastic has been dyed SEM Firethorn Red:

This is a dyed kick panel next to a piece of the new carpet; it goes together pretty good:

I relined the inside of my console with some of the new carpet:

*78 Chevyrado* · 10-03-2008, 12:27 AM

Stripped and repainted bumper. Painted it a color called aluminum. Looks somewhere between silver and chrome.

I already had the new grille, but I found all 3 pieces of grille trim in the junk yard and polished them up and repainted the stripe:

Here's a couple of upgrades:

Pulse Wiper Switch:

New ACC Carpet; i also got enough to line the back wall of the cab, kick panels and inside of console:

I think I have about as much money in new parts and materials as I will have in the paint job

It'll be worth it though!
I'll update when I have something to add; I don't have much to do now until I get the truck back.

Kenny

jrsmith_2010 · 10-17-2008, 11:55 AM

Quote:

Originally Posted by 78 Chevyrado

All the interior vinyl and plastic has been dyed SEM Firethorn Red:

This is a dyed kick panel next to a piece of the new carpet; it goes together pretty good:

I relined the inside of my console with some of the new carpet:

awesome truck dude, where did u get the interior dye? how did it come out?

thanks
jrsmith

*78 Chevyrado* · 10-17-2008, 12:05 PM

I got my interior paint at eastwood
here:
http://www.eastwoodco.com/jump.jsp?i...emType=PRODUCT

I got the adhesion promoter here also:
http://www.eastwoodco.com/shopping/p...ProductID=2523

It all came out perfect, even in person

Follow the instructions to the letter and all will be well. I used 3.5 cans of paint to do all my trim (no headliner trim), and only used around one can of adhesion promoter.

**old Rusty C10** · 10-03-2008, 12:31 AM

looks great thanks for the update

spudz · 10-03-2008, 01:38 AM

looks good!

rod86 · 10-03-2008, 06:29 AM

lookin good so far..

**N2TRUX** · 10-03-2008, 08:15 AM

Man that is nice. I love the interior pieces.

chrismoore701 · 10-03-2008, 08:22 AM

how did you fix the rust hole by the windshield?

*78 Chevyrado* · 10-03-2008, 10:42 AM

Quote:

Originally Posted by chrismoore701

how did you fix the rust hole by the windshield?

The body shop will cut out a small section and weld in a new piece and put the drain hole back. I just wrote WELD by anything I didn't want filler used on; I stripped the truck before I even found a body shop, so I marked everything like that just to be sure.

Thanks for the comments guys! I'm just waiting now for the shop to get done with one car thats ahead of me for the paint booth, then it'll be my turn! They will be painting inside the cab and taking the bed off to paint back there too.

manimal · 10-03-2008, 09:00 AM

Very nice..keep it up. Thanks for sharing
-Lance

**Corts60** · 10-03-2008, 10:43 AM

Man, that is sharp! Can't wait to see it all together!

**Palf70Step** · 10-03-2008, 10:50 AM

Truck is going to look great once all that comes together. Very nice!!

78BO · 10-03-2008, 11:28 AM

Is that the factory gauge panel or did you buy it? I need one and that looks realy good.

Rob73-87 · 10-03-2008, 02:42 PM

Very good job ! Keep up the good work ! Great !!!

*78 Chevyrado* · 10-03-2008, 04:03 PM

Quote:

Originally Posted by 78BO

Is that the factory gauge panel or did you buy it? I need one and that looks realy good.

It's a new bezel. I bought it from LMC.

Fer79 · 10-03-2008, 03:26 PM

nice, great job...

seanconnery · 10-04-2008, 02:06 AM

Dude, nice rebuild and is that a NASCAR edition F150 I see in the background of the 4th pic?

*78 Chevyrado* · 10-04-2008, 09:49 PM

Thanks Guys! Monday they're supposed to start working on my truck full time.

Quote:

Originally Posted by seanconnery

Dude, nice rebuild and is that a NASCAR edition F150 I see in the background of the 4th pic?

Good eye! That's my Dad's truck. Here's ya a better pic.

S10Fan · 10-04-2008, 10:05 PM

Truck looks GREAT! Of course I'm talking about the Chevy! LOL.

andresco50 · 10-04-2008, 11:25 PM

Looks awesome man congrats!!!!!!!!!

moneyeater · 10-04-2008, 02:45 AM

Man thats going to be one flawless truck!

87Lowrider · 10-04-2008, 10:00 AM

Man.. that's really nice progress!

10-03-2008, 12:25 AM	#1
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	While I'm Waiting... Here's the FINISHED thread now it's all done. http://67-72chevytrucks.com/vboard/s...=1#post2963839 Here's how the truck used to look; all original (even paint) except for wheels, seats and console, and new grille: Here's a pic of the wreck that started the whole rebuild: Had to rebuild the front end all the way to the steering box, so everything from there is new, including a lower RH Control arm. While rebuilding the front end I swapped in a new set of HD Front coils and raised the front at least 2 inches. Then I had to get a set of 1.5 lift blocks for the rear. Here's how the lift looks: Here's the truck, stripped and ready for the body shop: New Seam Sealer: This is the ONLY Rust hole in the whole truck Last edited by 78 Chevyrado; 03-05-2009 at 10:48 PM.

10-03-2008, 12:25 AM	#2
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	Re: While I'm Waiting... The truck is off at the bodyshop getting painted, inside and out. Here's where it's at now: While I'm Waiting, Here's some stuff I've gotten done for when I get it back. Here's a before and after rebuilding the vent windows: Finished vent windows and repainted and polished headlight buckets: Cleaned up and polished cluster and ac controls: Kinda out of order but here's the stripped and repainted trailer receiver: Last edited by 78 Chevyrado; 10-04-2008 at 11:19 PM.

10-03-2008, 12:26 AM	#3
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	Re: While I'm Waiting... All the interior vinyl and plastic has been dyed SEM Firethorn Red: This is a dyed kick panel next to a piece of the new carpet; it goes together pretty good: I relined the inside of my console with some of the new carpet: Last edited by 78 Chevyrado; 10-03-2008 at 12:33 AM.

10-03-2008, 12:27 AM	#4
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	Re: While I'm Waiting... Stripped and repainted bumper. Painted it a color called aluminum. Looks somewhere between silver and chrome. I already had the new grille, but I found all 3 pieces of grille trim in the junk yard and polished them up and repainted the stripe: Here's a couple of upgrades: Pulse Wiper Switch: New ACC Carpet; i also got enough to line the back wall of the cab, kick panels and inside of console: I think I have about as much money in new parts and materials as I will have in the paint job It'll be worth it though! I'll update when I have something to add; I don't have much to do now until I get the truck back. Kenny

10-17-2008, 12:05 PM	#6
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	Re: While I'm Waiting... I got my interior paint at eastwood here: http://www.eastwoodco.com/jump.jsp?i...emType=PRODUCT I got the adhesion promoter here also: http://www.eastwoodco.com/shopping/p...ProductID=2523 It all came out perfect, even in person Follow the instructions to the letter and all will be well. I used 3.5 cans of paint to do all my trim (no headliner trim), and only used around one can of adhesion promoter.

10-03-2008, 12:31 AM	#7
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,307	Re: While I'm Waiting... looks great thanks for the update __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-03-2008, 01:38 AM	#8
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: While I'm Waiting... looks good! __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

10-03-2008, 06:29 AM	#9
rod86 great southern land Join Date: Feb 2008 Location: perth - australia Posts: 6,194	Re: While I'm Waiting... lookin good so far.. __________________ rod 86 chevy c10 silverado

10-03-2008, 08:15 AM	#10
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: While I'm Waiting... Man that is nice. I love the interior pieces. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

10-03-2008, 08:22 AM	#11
chrismoore701 Registered User Join Date: Dec 2004 Location: Highland, IN Posts: 2,326	Re: While I'm Waiting... how did you fix the rust hole by the windshield?

10-03-2008, 09:00 AM	#13
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: While I'm Waiting... Very nice..keep it up. Thanks for sharing -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

10-03-2008, 10:43 AM	#14
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,697	Re: While I'm Waiting... Man, that is sharp! Can't wait to see it all together! __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/showthread.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 73 Chevy C20(Daily)http://67-72chevytrucks.com/vboard/s...d.php?t=852767 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(sold)

10-03-2008, 10:50 AM	#15
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,090	Re: While I'm Waiting... Truck is going to look great once all that comes together. Very nice!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-03-2008, 11:28 AM	#16
78BO Registered User Join Date: May 2008 Location: Austin TX Posts: 531	Re: While I'm Waiting... Is that the factory gauge panel or did you buy it? I need one and that looks realy good.

10-03-2008, 02:42 PM	#17
Rob73-87 Registered User Join Date: Feb 2008 Location: Nuremberg, Germany Posts: 116	Re: While I'm Waiting... Very good job ! Keep up the good work ! Great !!!



Register or Log In To remove these advertisements.

10-03-2008, 03:26 PM	#19
Fer79 Registered User Join Date: Aug 2008 Location: pIEDRAS NEGRAS, COAHUILA, MEXICO Posts: 242	Re: While I'm Waiting... nice, great job... __________________ https://www.facebook.com/fernandopiro.guillen/ https://www.facebook.com/destroyerhammer79/

10-04-2008, 02:06 AM	#20
seanconnery Registered User Join Date: Apr 2008 Location: Towson, MD Posts: 197	Re: While I'm Waiting... Dude, nice rebuild and is that a NASCAR edition F150 I see in the background of the 4th pic? __________________ G to the M to the C......fool! RIP Jerry Reed "The Snowman"

10-04-2008, 10:05 PM	#22
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,641	Re: While I'm Waiting... Truck looks GREAT! Of course I'm talking about the Chevy! LOL. __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

10-04-2008, 11:25 PM	#23
andresco50 Registered User Join Date: Jan 2008 Location: Lakeworth, Fl Posts: 633	Re: While I'm Waiting... Looks awesome man congrats!!!!!!!!! __________________ 2001 silverado 2wd 2003 silverado 4wd 1975 scottsdale c10 (project)

10-04-2008, 02:45 AM	#24
moneyeater Registered User Join Date: Feb 2003 Location: Northern Germany,near Bremen Posts: 684	Re: While I'm Waiting... Man thats going to be one flawless truck! __________________ My little US vehicle parts business: http://www.thegearheaddepot.com/ Come have a look! ´81 GMC C 10, Spanish Red

10-04-2008, 10:00 AM	#25
87Lowrider Navy Radioman Veteran Join Date: Jul 2007 Location: Western Kentucky Posts: 1,350	Re: While I'm Waiting... Man.. that's really nice progress! __________________ 1987 Chevrolet R10 Silverado BBC Build thread - SOLD 1986 GMC Sierra Classic - SOLD 1957 Chevy Step Side - At the Body Shop Daily Driver; 2005 Chevrolet Silverado 4x4 Z71 Stepside

Register or Log In To remove these advertisements.