Cup holder idea's needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**oldiron** · 04-04-2010, 02:53 AM

I'm going on a road trip in my 71 4x4 to Calif. in June. It would be nice to have a cold Mountian Dew to sip on while I'm on the road.
Cup holder idea's and pictures would be appreciated.

Leviticus · 04-04-2010, 03:00 AM

I have one of those cheap plastic center consoles that sit on the hump that I throw in when I take a drive/trip in it. It works good, looks like crap though. A word of wisdom, if you like your carpet, throw something heavy in the storage part of it so it doesn't want to tip when you corner.

Tx Firefighter · 04-04-2010, 06:56 AM

Seriously, a roll of duct tape laying on the trans hump will work great. And, if you needed some duct tape sometime...

yfs200p · 04-08-2010, 09:30 PM

Quote:

Originally Posted by Tx Firefighter

Seriously, a roll of duct tape laying on the trans hump will work great. And, if you needed some duct tape sometime...

^^X2

This is what I use in my work truck and it has honestly never ever failed. The adhesive on the sides of the roll keeps it stuck to the floor, and a 12oz beer oops i mean soda will never dump over if its inside the roll.

KyFarm · 06-12-2014, 01:01 PM

Quote:

Originally Posted by Tx Firefighter

Seriously, a roll of duct tape laying on the trans hump will work great. And, if you needed some duct tape sometime...

this is absolutely true and what my cousin used in his old truck before he got a newer one. The good thing is that the heat from the hump kindof sticks the roll of tape down

neba · 04-04-2010, 07:55 AM

LMC sells one that replaces your ashtray

ajserra · 04-04-2010, 07:58 AM

I just made one for myself. I picked up a used ashtray on e-bay (Cheap) and 2 fold-up cup holders (Also on e-bay). I drilled and mounted the cup holder to the front plate on the ashtray. Total cost, about $25.00. With the ashtray closed, the cup holders block the heater controls, but open the ashtray and you can then reach under to regulate the heat/AC. The best part is that when the cup holders are collapsed, they only stick out about one half inch from the dash. Oh and one other thing, if you smoke (Not in my truck) you can still use the ash tray. I use the ashtray to hold my cell phone.

chevroletrucks · 04-04-2010, 08:52 AM

I just bought a 72 gmc, and it has a fold style that mounts on the lower part of the dash. I know this was adapted from a mid 90's chevy truck as my boss had one in his 94 W/T. Works great in a auto on the column situation. Not sure if its gonna interfere with my top loader 4-speed yet. I'm sure you could still find these in junk yards or order from any gm dealer. nice thing is you retain the look of the dash and keep the drinks lower incase of spills.

A69C10 · 04-04-2010, 10:37 AM

look at late model gm trucks cup holder in center and can bolt to seat frame planning on doing it to mine after seat gets recovered

OhioDan · 04-04-2010, 10:48 AM

Here's one somebody on the board installed in their truck.

http://67-72chevytrucks.com/vboard/s...d.php?t=208408

Sinister · 04-04-2010, 10:52 AM

I have a generic one from Kragen. Works good, the cup holders are adjustable to hold Big Gulps or cans or whatever. I have it packed with CD's and tools.

Sillyoldman · 04-04-2010, 11:34 AM

Take Buford with you.

DT1 · 04-05-2010, 01:59 PM

Quote:

Originally Posted by Sillyoldman

Take Buford with you.

I'd really like to take him. I know a good truck dog when I see one.

**NC67Chev** · 04-24-2011, 04:21 PM

I finally finished my "cup holders," so I thought I would share a couple of pics. My real goal was to add some speakers, but I don't like the look of the kick panels. I've also been wanting some cup holders, but wasn't crazy about anything I had seen. So after tinking about it for a while, I figured why not tackle both at one time. Here's what I ended up with:

*lakeroadster* · 04-24-2011, 05:00 PM

The ones that are being sold that go in the stock ashtry locates the drink right in front of the radio. And if anything splashes out... yep, all over the radio.

We can do better. GM had underdash cup holders in the early 90's. Basically an add on deal. There are some on Ebay if you don't want to hit up the local junk yard.

Search for "dash cup holder"

92 chevy pull out under dash cup holder

ivanuf2 · 04-28-2011, 07:22 PM

This one looks good and strong. I am thinking of ordering one to do the ash tray install on the photo.

http://www.extremeproducts.biz/cup-cupholder.html
Posted via Mobile Device

**oldiron** · 04-05-2010, 06:22 PM

Quote:

Originally Posted by Sillyoldman

Take Buford with you.

Buford would be welcomed.

cparman · 04-05-2010, 09:17 PM

That's funny right there, i don't care what anyonelse says !!!

Quote:

Originally Posted by sillyoldman

take buford with you.

Hubscrub · 04-05-2010, 10:58 PM

i made me one that slps in the ash tray hole sorry for the crappy pics

**oldiron** · 04-07-2010, 02:59 AM

Quote:

Originally Posted by Hubscrub

i made me one that slps in the ash tray hole sorry for the crappy pics

Don't worry about the pictures. Great idea and a nice job.

Hubscrub · 04-07-2010, 10:46 PM

Quote:

Originally Posted by oldiron

Don't worry about the pictures. Great idea and a nice job.

thanks, i bought one for my 85 chevy a couple years ago and it works good but i am trying to save all the money i can so i thought i would try it

**NC67Chev** · 04-04-2010, 11:50 AM

I'm curious if anybody has ever used these?

http://www.metropartsmarket.com/cata...lder-c2s3.html

I've been looking for one because for my truck, but didn't really want to use a black one. They have several color options. I've been thinking about putting it on my birthday wish list.

Sillyoldman · 04-04-2010, 11:53 AM

Dug this up for you. I really like ashtray conversions. http://67-72chevytrucks.com/vboard/s...d.php?t=351469

lt704 · 04-04-2010, 03:30 PM

I have the dual padded cup holder as mentioned by NC67CHEV. It works well, when I get to a show I take it off and put my original ash tray in.

**PICKMUP** · 04-04-2010, 04:53 PM

Here's two choices...depending on current budget!

04-04-2010, 02:53 AM	#1
oldiron Designated Grumpy Old Man Join Date: Oct 2001 Location: arlington, washington usa Posts: 3,092	Cup holder idea's needed I'm going on a road trip in my 71 4x4 to Calif. in June. It would be nice to have a cold Mountian Dew to sip on while I'm on the road. Cup holder idea's and pictures would be appreciated. __________________ Never let the truth get in the way of a good story 71 Chev 1/2 ton 4X4 LWB Fleetside SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=361222 http://www.youtube.com/watch?v=1LgREwtDfaA 68 Chev 1 ton flat bed http://www.youtube.com/watch?v=0bO8szzlD4A 56 Chev Handyman Wagon http://www.youtube.com/watch?v=9y-6ddpBTkM http://www.youtube.com/watch?v=lbLzZ7zY8wA 56 Chev Belair http://67-72chevytrucks.com/vboard/s...d.php?t=410667 http://www.youtube.com/watch?v=xoW0Ei7ZNIg Last edited by oldiron; 04-04-2010 at 02:54 AM.

04-04-2010, 03:00 AM	#2
Leviticus Shake and Bake! Join Date: Feb 2010 Location: Central Coast, CA Posts: 609	Re: Cup holder idea's needed I have one of those cheap plastic center consoles that sit on the hump that I throw in when I take a drive/trip in it. It works good, looks like crap though. A word of wisdom, if you like your carpet, throw something heavy in the storage part of it so it doesn't want to tip when you corner. __________________ "All tyranny needs to gain a foothold is for people of good conscience to remain silent." Thomas Jefferson "You are remembered for the rules you break." General Douglas MacArthur "Support Our Troops And The NRA"

04-04-2010, 06:56 AM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Cup holder idea's needed Seriously, a roll of duct tape laying on the trans hump will work great. And, if you needed some duct tape sometime... __________________ I'm on the Instagram- @Gearhead_Kevin

04-04-2010, 07:55 AM	#6
neba Registered User Join Date: Feb 2010 Location: duluth mn Posts: 108	Re: Cup holder idea's needed LMC sells one that replaces your ashtray

04-04-2010, 07:58 AM	#7
ajserra Registered User Join Date: Jul 2008 Location: Brigantine, NJ Posts: 16	Re: Cup holder idea's needed I just made one for myself. I picked up a used ashtray on e-bay (Cheap) and 2 fold-up cup holders (Also on e-bay). I drilled and mounted the cup holder to the front plate on the ashtray. Total cost, about $25.00. With the ashtray closed, the cup holders block the heater controls, but open the ashtray and you can then reach under to regulate the heat/AC. The best part is that when the cup holders are collapsed, they only stick out about one half inch from the dash. Oh and one other thing, if you smoke (Not in my truck) you can still use the ash tray. I use the ashtray to hold my cell phone.

04-04-2010, 08:52 AM	#8
chevroletrucks Registered User Join Date: Sep 2002 Location: Northwest,Indiana Posts: 128	Re: Cup holder idea's needed I just bought a 72 gmc, and it has a fold style that mounts on the lower part of the dash. I know this was adapted from a mid 90's chevy truck as my boss had one in his 94 W/T. Works great in a auto on the column situation. Not sure if its gonna interfere with my top loader 4-speed yet. I'm sure you could still find these in junk yards or order from any gm dealer. nice thing is you retain the look of the dash and keep the drinks lower incase of spills. __________________ 67' Chevy C10 Lwb small rear window 71' Gmc 1500 custom 4x4 72' Gmc Grande Sierra

04-04-2010, 10:37 AM	#9
A69C10 Registered User Join Date: Dec 2009 Location: McDonough,GA Posts: 123	Re: Cup holder idea's needed look at late model gm trucks cup holder in center and can bolt to seat frame planning on doing it to mine after seat gets recovered

04-04-2010, 10:48 AM	#10
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Re: Cup holder idea's needed Here's one somebody on the board installed in their truck. http://67-72chevytrucks.com/vboard/s...d.php?t=208408 __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

04-04-2010, 10:52 AM	#11
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Cup holder idea's needed I have a generic one from Kragen. Works good, the cup holders are adjustable to hold Big Gulps or cans or whatever. I have it packed with CD's and tools. __________________ Beat it to fit, Paint it to match...

04-04-2010, 11:34 AM	#12
Sillyoldman #16876 Join Date: Apr 2005 Location: Auburn WA Posts: 12,266	Re: Cup holder idea's needed Take Buford with you. Attached Images __________________ Posted via Stationary Device '71 Custom Deluxe C-20 402. '67 Buick Special 455. '49 Plymouth Special Deluxe. *"I love that old car smell"* *Some people are like Slinkies... not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs.*

04-24-2011, 04:21 PM	#14
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: Cup holder idea's needed I finally finished my "cup holders," so I thought I would share a couple of pics. My real goal was to add some speakers, but I don't like the look of the kick panels. I've also been wanting some cup holders, but wasn't crazy about anything I had seen. So after tinking about it for a while, I figured why not tackle both at one time. Here's what I ended up with: Attached Images __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

04-24-2011, 05:00 PM	#15
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: Cup holder idea's needed The ones that are being sold that go in the stock ashtry locates the drink right in front of the radio. And if anything splashes out... yep, all over the radio. We can do better. GM had underdash cup holders in the early 90's. Basically an add on deal. There are some on Ebay if you don't want to hit up the local junk yard. Search for "dash cup holder" 92 chevy pull out under dash cup holder Last edited by lakeroadster; 04-24-2011 at 05:01 PM.

04-28-2011, 07:22 PM	#16
ivanuf2 Registered User Join Date: Mar 2010 Location: Puerto Rico Posts: 84	Re: Cup holder idea's needed This one looks good and strong. I am thinking of ordering one to do the ash tray install on the photo. http://www.extremeproducts.biz/cup-cupholder.html Posted via Mobile Device

04-05-2010, 10:58 PM	#19
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: Cup holder idea's needed i made me one that slps in the ash tray hole sorry for the crappy pics Attached Images __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

04-04-2010, 11:50 AM	#22
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: Cup holder idea's needed I'm curious if anybody has ever used these? http://www.metropartsmarket.com/cata...lder-c2s3.html I've been looking for one because for my truck, but didn't really want to use a black one. They have several color options. I've been thinking about putting it on my birthday wish list. __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar



Register or Log In To remove these advertisements.

04-04-2010, 11:53 AM	#23
Sillyoldman #16876 Join Date: Apr 2005 Location: Auburn WA Posts: 12,266	Re: Cup holder idea's needed Dug this up for you. I really like ashtray conversions. http://67-72chevytrucks.com/vboard/s...d.php?t=351469 __________________ Posted via Stationary Device '71 Custom Deluxe C-20 402. '67 Buick Special 455. '49 Plymouth Special Deluxe. *"I love that old car smell"* *Some people are like Slinkies... not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs.*

04-04-2010, 03:30 PM	#24
lt704 Registered User Join Date: Jun 2009 Location: Berkley, Massachusetts Posts: 235	Re: Cup holder idea's needed I have the dual padded cup holder as mentioned by NC67CHEV. It works well, when I get to a show I take it off and put my original ash tray in.

04-04-2010, 04:53 PM	#25
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: Cup holder idea's needed Here's two choices...depending on current budget! Attached Images

Register or Log In To remove these advertisements.