67 ram style power steering question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67pro-street · 05-12-2005, 08:53 PM

i have te original type of power steering that was put on 67 trucks with the hydraulic ram. my question is 1) is there any parts stores or vendors who sell the lines that run from the pump to the unit and if not then 2) which hole on the unit would be for the pressure line and which hole would be the return line. there is one large hole and one small hole. thanks 67pro-street

**hotrodmtodd** · 05-12-2005, 11:20 PM

Feel free to use my Play On Words. It's kinda' like, Lefty Loosey, Righty Tighty. Unless I've forgotten EVERYTHING they taught me in GM training school 22 years ago. I think that's the rule. Correct me if I'm wrong guys, Hot Rod

JimKshortstep4x4 · 05-13-2005, 06:33 AM

I believe the Corvettes used the same assist cylinder setup. Here is a link to the Paragon Corvette site. It might be worth while calling them, also.

Jim

http://www.corvette-paragon.com/

05-12-2005, 08:53 PM	#1
67pro-street Registered User Join Date: Jan 2003 Location: Bellingham, WA Posts: 218	67 ram style power steering question i have te original type of power steering that was put on 67 trucks with the hydraulic ram. my question is 1) is there any parts stores or vendors who sell the lines that run from the pump to the unit and if not then 2) which hole on the unit would be for the pressure line and which hole would be the return line. there is one large hole and one small hole. thanks 67pro-street

05-12-2005, 11:20 PM	#2
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 918	Big Return on a Little Pressure Feel free to use my Play On Words. It's kinda' like, Lefty Loosey, Righty Tighty. Unless I've forgotten EVERYTHING they taught me in GM training school 22 years ago. I think that's the rule. Correct me if I'm wrong guys, Hot Rod

05-13-2005, 06:33 AM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I believe the Corvettes used the same assist cylinder setup. Here is a link to the Paragon Corvette site. It might be worth while calling them, also. Jim http://www.corvette-paragon.com/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.