Fashionable Fever! - 1969 Chevy C10 Build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ryans69chevy · 11-23-2012, 01:32 AM

Hey! I've been a member on this site for a few years now searching through threads, asking questions, and looking through threads. I finally am starting a build thread! I've been wanting to buy a 67-72 Chevy since I was very young! I believe I saw one in a magazine and since then I've been in love with them. I own a 1969 Chevy Custom C10 Long Bed 2wd. I bought it in late July of 2009 from a family friend. It came with a 307 4 speed.

Pics to come!

I've been working on this truck off and on for a couple years now. In the last year I finally decided to park the truck and perform a frame off resto on the truck. Earlier this year I began ripping everything off to a rolling chassis. I got the truck sandblasted and finally had it primed and painted by The Foss Shop where I'm from. It took awhile for me to get the truck primed and painted because they were transforming a brand new truck into a work of art for the SEMA show. So all of there other work got put on hold because of it. It was a long wait, but worth all the while! It looks fantastic! I will post pics!

Plans for build :
Disc brakes all around, lowered 2 1/2 ", installing a BBC backed by a tremec 6 speed, bench seat, shaved firewall, no radio, no heater, no a/c, changing my steal bed to a wood bed.

Only things I'm not sure of is the color of the paint and the rims.

Thanks for checking out my build thread!

Ryan

shawno72 · 11-23-2012, 01:38 AM

Can't wait for the pics. Skinds like your off to a good start
Posted via Mobile Device

ryans69chevy · 11-23-2012, 02:38 AM

Driving my pickup 25 miles to college! It was a cold ride every morning since my pickup had to sit outside all nite! My other car took the third stall in my parents garage.

ryans69chevy · 11-23-2012, 02:59 AM

This is of my cab resto in March/April of 2010. I learned from a few of my mistakes... I replaced a lot of the cab such as cab supports, cab corners, rockers, half of the floor. Put in sound deadener, carpet, and had my bench seat redone.

gdavis · 11-23-2012, 09:48 PM

Quote:

Originally Posted by ryans69chevy

Driving my pickup 25 miles to college! It was a cold ride every morning since my pickup had to sit outside all nite! My other car took the third stall in my parents garage.

Boy does it look cold there. I could not move around if I had to deal with that kind of weather.

ryans69chevy · 11-23-2012, 03:01 AM

In the last couple pics I was applying laquer thinner to the frame and naval jelly which cleaned the rust and protected the frame.

ryans69chevy · 11-23-2012, 03:14 AM

This is me getting the pickup ready to go to The Foss Shop up town and getting the cab corners and rockers primed.

ryans69chevy · 11-23-2012, 03:29 AM

Putting sound deadener, jute padding and getting the carpet ready to be put in!

gdavis · 11-23-2012, 09:51 PM

Quote:

Originally Posted by ryans69chevy

This is me getting the pickup ready to go to The Foss Shop up town and getting the cab corners and rockers primed.

Did you have trouble with the door not fitting after you cut so much metal out of the floor . all at once.. i see that you did not brace the cab . I cut the same than out of mine and was hoping that your door fit good. no trouble

**67cheby** · 11-23-2012, 10:22 AM

great start !

True 67 · 11-23-2012, 10:42 AM

can't wait to see more PICS!!!!lmbo..

True

ryans69chevy · 11-23-2012, 12:39 PM

This is the BBC I bought on Veterans Day 2010. It's a 454 backed by a TH400. I set it down in the shop and made a big mess! Coolant from the engine was coming out and then on top of that after I drained the oil into a bucket I accidentally swung the tranny into it! Pretty much all the oil from the engine was now on the floor lol. That's what I get for having a cluttered shop.

ryans69chevy · 11-23-2012, 12:49 PM

I picked up a set of 049 heads for my 454 build. I bought a porting kit and started smoothing out the heads as best I could before they went to the engine shop to get rebuilt.

ryans69chevy · 11-23-2012, 01:14 PM

Fast forward a year and a half - It took about a year at Quality Engine to build it since I was going to college I had to save up for parts. I had the block align honed, rebore and plate hone, the deck was blocked, and grinded for clearance. It turned out to be a 489. I bought it a Eagle stroker kit for it with a 4.250" crank, 6.385" H beam rods, and 8.7:1 SRP pistons. The camshaft is a Comp Cam 282/288 #XR282HR-10. The heads were CC'd at 109 cc's.

ryans69chevy · 11-23-2012, 02:05 PM

This is of my frame sitting in the shop my dad and I finally finished up! This was right before I took it to get sandblasted.

True 67 · 11-23-2012, 02:42 PM

Nice job on the shop...

True

ryans69chevy · 11-24-2012, 12:17 AM

In post 4 I said I learned from a few of my mistakes. That was one of them. Lol I didn't think that would happen. I should have braced it. It took a long time to get them to fit. I'll have to work on it more when I start to dig into the cab again. And yes it gets pretty nippy around here!
Posted via Mobile Device

ryans69chevy · 02-12-2016, 10:20 PM

Wow it's been awhile since I've posted/updated this project! I went on a little break working on it because I wanted to buy a house so I had to save all my money! I totally gutted the garage and started over. I made it right!

I should have taken some pics of when I first got it done- when it was clean ha! Brought my frame from my parents shop (which was in pics above) to my place in Fargo.

Let's see if you can find my frame...

ryans69chevy · 02-12-2016, 10:23 PM

Here it is! Behind all my junk ha. I actually had the frame painted right after I had it sandblasted in 2011? I can't remember, it's been awhile.

ryans69chevy · 02-12-2016, 10:26 PM

Finally figured out my Baer disc brakes this fall and got them installed! Pretty happy about it!

ryans69chevy · 02-12-2016, 10:32 PM

Rebuilt the whole front end with all new moog parts. New moog front springs and I upgraded my factory ubolts on my lower control arm shaft from 1/2" to 9/16" to beef it up a bit. They fit like a glove. Also repainted my control arms.

ryans69chevy · 02-12-2016, 10:33 PM

Bought a redhead steering gear!

haven't tested it out yet but the paint looks good! Lol

ryans69chevy · 02-12-2016, 10:35 PM

Underneath the front suspension.

ryans69chevy · 02-12-2016, 10:43 PM

Found a little better pic of the garage soon after I got it almost done... And it still is "almost" done haha still need to trim out my windows... It's I believe 24' by 32' with a 20' by 15' add-on on the back. It starts where I installed that header. It's quite a big garage but you know how it goes... I'm already in need of more space! Lol

ryans69chevy · 03-19-2016, 01:29 PM

I've been tight on money lately since I'm getting married in late April and trying to remodel the house and put money towards my truck as much as I can. It's hard to keep moving forward when you need more expensive parts! But I'm doing odds and ends that don't cost much like trying to redo my aluminum trim pieces. Also prepping to start redoing my front fenders and radiator support and all that.

I've been saving up for awhile and can now start making payments to get that tremec 6 speed magnum I've wanted for so many years. Just made my first payment yesterday! Hopefully mid summer I can have the whole kit and can start moving forward and keep posting to this build thread!

11-23-2012, 01:32 AM	#1
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Fashionable Fever! - 1969 Chevy C10 Build Hey! I've been a member on this site for a few years now searching through threads, asking questions, and looking through threads. I finally am starting a build thread! I've been wanting to buy a 67-72 Chevy since I was very young! I believe I saw one in a magazine and since then I've been in love with them. I own a 1969 Chevy Custom C10 Long Bed 2wd. I bought it in late July of 2009 from a family friend. It came with a 307 4 speed. Pics to come! I've been working on this truck off and on for a couple years now. In the last year I finally decided to park the truck and perform a frame off resto on the truck. Earlier this year I began ripping everything off to a rolling chassis. I got the truck sandblasted and finally had it primed and painted by The Foss Shop where I'm from. It took awhile for me to get the truck primed and painted because they were transforming a brand new truck into a work of art for the SEMA show. So all of there other work got put on hold because of it. It was a long wait, but worth all the while! It looks fantastic! I will post pics! Plans for build : Disc brakes all around, lowered 2 1/2 ", installing a BBC backed by a tremec 6 speed, bench seat, shaved firewall, no radio, no heater, no a/c, changing my steal bed to a wood bed. Only things I'm not sure of is the color of the paint and the rims. Thanks for checking out my build thread! Ryan

11-23-2012, 01:38 AM	#2
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Fashionable Fever! - 1969 Chevy C10 Build Can't wait for the pics. Skinds like your off to a good start Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-23-2012, 02:38 AM	#3
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build Driving my pickup 25 miles to college! It was a cold ride every morning since my pickup had to sit outside all nite! My other car took the third stall in my parents garage. Attached Images

11-23-2012, 02:59 AM	#4
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build This is of my cab resto in March/April of 2010. I learned from a few of my mistakes... I replaced a lot of the cab such as cab supports, cab corners, rockers, half of the floor. Put in sound deadener, carpet, and had my bench seat redone. Attached Images

11-23-2012, 03:01 AM	#6
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build In the last couple pics I was applying laquer thinner to the frame and naval jelly which cleaned the rust and protected the frame.

11-23-2012, 03:14 AM	#7
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build This is me getting the pickup ready to go to The Foss Shop up town and getting the cab corners and rockers primed. Attached Images

11-23-2012, 03:29 AM	#8
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build Putting sound deadener, jute padding and getting the carpet ready to be put in! Attached Images

11-23-2012, 10:22 AM	#10
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Fashionable Fever! - 1969 Chevy C10 Build great start ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-23-2012, 10:42 AM	#11
True 67 Registered User Join Date: Sep 2010 Location: Austell, Ga Posts: 151	Re: Fashionable Fever! - 1969 Chevy C10 Build can't wait to see more PICS!!!!lmbo.. True

11-23-2012, 12:39 PM	#12
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build This is the BBC I bought on Veterans Day 2010. It's a 454 backed by a TH400. I set it down in the shop and made a big mess! Coolant from the engine was coming out and then on top of that after I drained the oil into a bucket I accidentally swung the tranny into it! Pretty much all the oil from the engine was now on the floor lol. That's what I get for having a cluttered shop. Attached Images

11-23-2012, 12:49 PM	#13
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build I picked up a set of 049 heads for my 454 build. I bought a porting kit and started smoothing out the heads as best I could before they went to the engine shop to get rebuilt. Attached Images

11-23-2012, 01:14 PM	#14
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build Fast forward a year and a half - It took about a year at Quality Engine to build it since I was going to college I had to save up for parts. I had the block align honed, rebore and plate hone, the deck was blocked, and grinded for clearance. It turned out to be a 489. I bought it a Eagle stroker kit for it with a 4.250" crank, 6.385" H beam rods, and 8.7:1 SRP pistons. The camshaft is a Comp Cam 282/288 #XR282HR-10. The heads were CC'd at 109 cc's. Attached Images

11-23-2012, 02:05 PM	#15
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build This is of my frame sitting in the shop my dad and I finally finished up! This was right before I took it to get sandblasted. Attached Images

11-23-2012, 02:42 PM	#16
True 67 Registered User Join Date: Sep 2010 Location: Austell, Ga Posts: 151	Re: Fashionable Fever! - 1969 Chevy C10 Build Nice job on the shop... True

11-24-2012, 12:17 AM	#17
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build In post 4 I said I learned from a few of my mistakes. That was one of them. Lol I didn't think that would happen. I should have braced it. It took a long time to get them to fit. I'll have to work on it more when I start to dig into the cab again. And yes it gets pretty nippy around here! Posted via Mobile Device



Register or Log In To remove these advertisements.

02-12-2016, 10:20 PM	#18
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build Wow it's been awhile since I've posted/updated this project! I went on a little break working on it because I wanted to buy a house so I had to save all my money! I totally gutted the garage and started over. I made it right! I should have taken some pics of when I first got it done- when it was clean ha! Brought my frame from my parents shop (which was in pics above) to my place in Fargo. Let's see if you can find my frame... Attached Images

02-12-2016, 10:23 PM	#19
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build Here it is! Behind all my junk ha. I actually had the frame painted right after I had it sandblasted in 2011? I can't remember, it's been awhile. Attached Images

02-12-2016, 10:26 PM	#20
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build Finally figured out my Baer disc brakes this fall and got them installed! Pretty happy about it! Attached Images

02-12-2016, 10:32 PM	#21
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build Rebuilt the whole front end with all new moog parts. New moog front springs and I upgraded my factory ubolts on my lower control arm shaft from 1/2" to 9/16" to beef it up a bit. They fit like a glove. Also repainted my control arms. Attached Images

02-12-2016, 10:33 PM	#22
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build Bought a redhead steering gear! haven't tested it out yet but the paint looks good! Lol Attached Images

02-12-2016, 10:35 PM	#23
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build Underneath the front suspension. Attached Images

02-12-2016, 10:43 PM	#24
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build Found a little better pic of the garage soon after I got it almost done... And it still is "almost" done haha still need to trim out my windows... It's I believe 24' by 32' with a 20' by 15' add-on on the back. It starts where I installed that header. It's quite a big garage but you know how it goes... I'm already in need of more space! Lol Attached Images

03-19-2016, 01:29 PM	#25
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: Fashionable Fever! - 1969 Chevy C10 Build I've been tight on money lately since I'm getting married in late April and trying to remodel the house and put money towards my truck as much as I can. It's hard to keep moving forward when you need more expensive parts! But I'm doing odds and ends that don't cost much like trying to redo my aluminum trim pieces. Also prepping to start redoing my front fenders and radiator support and all that. I've been saving up for awhile and can now start making payments to get that tremec 6 speed magnum I've wanted for so many years. Just made my first payment yesterday! Hopefully mid summer I can have the whole kit and can start moving forward and keep posting to this build thread!

Register or Log In To remove these advertisements.