Original Front Bumper License Plate - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ol Curt · 11-26-2008, 12:25 AM

I have the original bumper for my truck and have found a 66 truck plate i would like to attach. The holes line up side to side , but the plate would either stick well above or below the bumper. Is there a bracket I should be using?
Hate to sound stupid, but on this one I just am!

ol Curt · 11-26-2008, 12:44 AM

As usual, after asking a stupid question I thought it merited some better research. I found several pics of plates mounted thru the bottom holes and stick up slightly above the top.

scotts62 · 11-26-2008, 12:45 AM

When i had my tag on the front i believe they were bolted in the top holes and was about in middle of the bumper, but id have to look at an old pic to be sure. I never had a bracket.. if they have a bracket, heck you got me..

*LILRED66* · 11-26-2008, 12:46 AM

ol Curt:

You figured it out on your own...nice. Let's see how it looks.

scotts62 · 11-26-2008, 12:48 AM

well i was no help i couldnt remember.

ol Curt · 11-26-2008, 09:37 AM

Quote:

Originally Posted by LILRED66

ol Curt:

You figured it out on your own...nice. Let's see how it looks.

I have to go buy some license plate bolts this AM and will post after that. I have so little done, it will be nice to share SOME progress!

*LILRED66* · 11-26-2008, 10:30 AM

"Rome wasn't built overnight" and "you can get anywhere one inch at a time"...a few quotes I like to live by when dealing with my truck project.

ol Curt, "inch by inch, life is a cinch...yard by yard, life is hard"!

**ChiefRocka** · 11-26-2008, 10:33 AM

Quote:

Originally Posted by LILRED66

....."inch by inch, life is a cinch...yard by yard, life is hard"!

You are so clever !!

jchav62 · 11-26-2008, 12:56 PM

Quote:

Originally Posted by LILRED66

"Rome wasn't built overnight" and "you can get anywhere one inch at a time"...a few quotes I like to live by when dealing with my truck project.

ol Curt, "inch by inch, life is a cinch...yard by yard, life is hard"!

Very wise words...

ol Curt · 11-26-2008, 01:44 PM

Here is an inch worth! Thanks for the advice guys!

ol Curt · 11-26-2008, 01:49 PM

I guess I just thought I was posting a pic....

*LILRED66* · 11-26-2008, 01:54 PM

Very nice...that is the way all of the front license plates look on my 4-5-6 Chevy trucks.

MacAttack · 11-26-2008, 03:54 PM

I’ve got one old-school CA plate left (the other - the rear - was lost during the theft of my truck back in February) from the front bumper and I’ve got both new tags to put it on the rear bumper when the truck’s up and running soon, and I was wondering if it’s realistic to repaint the original flat black with the orange numbers and letters - or best to leave it all scratched up and original?

ol Curt · 11-26-2008, 04:14 PM

Quote:

Originally Posted by LILRED66

Very nice...that is the way all of the front license plates look on my 4-5-6 Chevy trucks.

Now that, makes me feel like I got it right!
Thanks!!

ol Curt · 11-26-2008, 04:17 PM

Speaking of original...I took the GM HEI distributor off that is depicted in my icon. I wanted the original look, so I went back to a stock looking distributor with a Petronix unit in it. I hope it is ok to offer something like that for free on here. If any of you have a six and are in need, just PM me and I'll send it to you for the freight.

Thanks,

Bob Dale 'ol Curt'
Newburgh, IN

Oregoon · 11-26-2008, 07:02 PM

I too have the stock bumper on my truck. However, those bolt holes appear to be for a metal plate, which centers the license plate itself. At least that's the story on my truck. Judging by the, ahem, patina, it's as old as the rest of the truck. I'm assuming it was specific to markets which required two plates. And yes, I need some better mounting hardware.

Check it out:

ol Curt · 11-26-2008, 07:11 PM

Oregoon, You might well be right. It does look better centered. If you ever have that plate off, how about snapping a shot of the plate so we all could see it.

Thanks!

11-26-2008, 12:25 AM	#1
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Original Front Bumper License Plate I have the original bumper for my truck and have found a 66 truck plate i would like to attach. The holes line up side to side , but the plate would either stick well above or below the bumper. Is there a bracket I should be using? Hate to sound stupid, but on this one I just am!

11-26-2008, 12:44 AM	#2
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: Original Front Bumper License Plate As usual, after asking a stupid question I thought it merited some better research. I found several pics of plates mounted thru the bottom holes and stick up slightly above the top.

11-26-2008, 12:45 AM	#3
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: Original Front Bumper License Plate When i had my tag on the front i believe they were bolted in the top holes and was about in middle of the bumper, but id have to look at an old pic to be sure. I never had a bracket.. if they have a bracket, heck you got me.. __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 11-26-2008 at 12:46 AM.

11-26-2008, 12:46 AM	#4
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Original Front Bumper License Plate ol Curt: You figured it out on your own...nice. Let's see how it looks. Last edited by LILRED66; 11-26-2008 at 12:47 AM.

11-26-2008, 12:48 AM	#5
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: Original Front Bumper License Plate well i was no help i couldnt remember. __________________ Scott 93 crew cab build Project 62

11-26-2008, 10:30 AM	#7
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Original Front Bumper License Plate "Rome wasn't built overnight" and "you can get anywhere one inch at a time"...a few quotes I like to live by when dealing with my truck project. ol Curt, "inch by inch, life is a cinch...yard by yard, life is hard"!

11-26-2008, 01:44 PM	#10
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: Original Front Bumper License Plate Here is an inch worth! Thanks for the advice guys!

11-26-2008, 01:49 PM	#11
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: Original Front Bumper License Plate I guess I just thought I was posting a pic.... Attached Images

11-26-2008, 01:54 PM	#12
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Original Front Bumper License Plate Very nice...that is the way all of the front license plates look on my 4-5-6 Chevy trucks.

11-26-2008, 03:54 PM	#13
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Original Front Bumper License Plate I’ve got one old-school CA plate left (the other - the rear - was lost during the theft of my truck back in February) from the front bumper and I’ve got both new tags to put it on the rear bumper when the truck’s up and running soon, and I was wondering if it’s realistic to repaint the original flat black with the orange numbers and letters - or best to leave it all scratched up and original? __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

11-26-2008, 04:17 PM	#15
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: Original Front Bumper License Plate Speaking of original...I took the GM HEI distributor off that is depicted in my icon. I wanted the original look, so I went back to a stock looking distributor with a Petronix unit in it. I hope it is ok to offer something like that for free on here. If any of you have a six and are in need, just PM me and I'll send it to you for the freight. Thanks, Bob Dale 'ol Curt' Newburgh, IN

11-26-2008, 07:02 PM	#16
Oregoon Roadside Rebuilder Join Date: Oct 2008 Location: Southeast Portland, OR Posts: 421	Re: Original Front Bumper License Plate I too have the stock bumper on my truck. However, those bolt holes appear to be for a metal plate, which centers the license plate itself. At least that's the story on my truck. Judging by the, ahem, patina, it's as old as the rest of the truck. I'm assuming it was specific to markets which required two plates. And yes, I need some better mounting hardware. Check it out: Attached Images Last edited by Oregoon; 11-26-2008 at 07:04 PM. Reason: Bad with the fingers.

11-26-2008, 07:11 PM	#17
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: Original Front Bumper License Plate Oregoon, You might well be right. It does look better centered. If you ever have that plate off, how about snapping a shot of the plate so we all could see it. Thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.