![]() |
|
![]() |
#1 |
Senior Member
![]() Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,915
|
Replacing the Dash
Is the dash bolted in or welded or both? I'm talking about the actual dash, not just the cluster or the dash pad.
Thanks. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2011
Location: Chattanooga, TN
Posts: 2,151
|
Re: Replacing the Dash
Pretty sure it's welded in
__________________
'83 K20-TPI '73 C10 '79 C10-ex-diesel(SOLD) '07 Tahoe(Son driving) '14 Suburban-DD '71 C10-current project |
![]() |
![]() |
![]() |
#3 |
1969 Custom 30 wrecker
Join Date: Sep 2001
Location: Pottsville, Pa
Posts: 2,611
|
Re: Replacing the Dash
It's both. There are 3 bolts on each side and spot welds running across in the windshield lip area. You would need to remove windshield to do it.
__________________
Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10 |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,915
|
Re: Replacing the Dash
Thanks. That's what it looked like to me. My buddy wants to take the dash out of one of his trucks and put it in another.
|
![]() |
![]() |
![]() |
#5 |
Old Skool Club
![]() Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: Replacing the Dash
I think the Factory Assembly Manual shows it to have 27 spot welds.....
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
![]() |
![]() |
![]() |
#6 |
Account Suspended
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
|
Re: Replacing the Dash
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jan 2011
Location: Townsend MT
Posts: 1,725
|
Re: Replacing the Dash
![]()
__________________
1966 F250 4X4 416 1972 K20 350 4 OTF Last edited by 1972RedNeck; 06-22-2011 at 02:57 PM. |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Jan 2005
Location: Ontario, Kali
Posts: 2,427
|
Re: Replacing the Dash
As long as the top of the dash is not damaged, I usually cut the dash under the dash pad. I call it it cutting along the dotted line. I unbolt the front of the dash and then I weld up the new front. Cover the welds with the dash pad and no one is the wiser. I once drilled out all of the spot welds along the windshield bottom and swore I would never do it again! I've done alot of non-a/c to a/c conversions this way, also hacked dash to non-hacked dashes. Never have to remove the windsheild, just protect it from cutting and welding.
Dano
__________________
![]() ![]() It ain't yours, if you didn't build it! Last edited by Dano69c10; 06-22-2011 at 03:58 PM. |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jan 2009
Location: Oakley KS
Posts: 122
|
Re: Replacing the Dash
Thanks for the tips guys! I've really been wanting to convert my '68 from non a/c to a/c and I think you've just convinced to go for it!
__________________
94 GMC Sierra GT with 66k original miles,'41 Chevy SOLD, '68 Chevy 1/2 2wd-2nd owner SOLD, '72 Chevy 3/4 4wd SOLD, '08 Chevy 1/2 4wd-service pickup, 2005 GMC 1/2 4wd 4 door lifted-my toy-SOLD, 2007 GMC Yukon XL Denali, 2009 Harley Street Glide |
![]() |
![]() |
![]() |
#10 |
Old Skool Club
![]() Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: Replacing the Dash
If that's the only reason....are you using aftermarket AC? If so, I'd think that using aftermarket outlets would be preferable. I had an air cab and in my opinion, the aftermarket outlets are pretty nice. If you wanted it to look vintage, you should be able to get the dimensions from an air cab, cut the holes in your dash and add the outlets. The factory AC controller will fit the hole that is already there. Aftermarket AC bulkhead connectors are way cleaner than the factory unit that takes up so much room under the hood. My new cab is a non-air cab and will be getting an aftermarket system, when the time (and money) is right.
Meanwhile, I've got a complete factory HVAC system in my garage that I will NOT be using..including the vents, plenums, etc.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jan 2009
Location: Oakley KS
Posts: 122
|
Re: Replacing the Dash
I'm not dead set on using a factory style a/c, I'd just like a/c! My '69 doesn't run so I don't really have anything to use for comparison. I've never rode in a factory a/c '67-'72. From what I've been told it's comparable to a '73-'87 or worse. I've owned 4 of those with a/c (and 1 without) and they weren't the best systems out there! What aftermarket would you recommend? I've heard good things about Vintage Air...
__________________
94 GMC Sierra GT with 66k original miles,'41 Chevy SOLD, '68 Chevy 1/2 2wd-2nd owner SOLD, '72 Chevy 3/4 4wd SOLD, '08 Chevy 1/2 4wd-service pickup, 2005 GMC 1/2 4wd 4 door lifted-my toy-SOLD, 2007 GMC Yukon XL Denali, 2009 Harley Street Glide |
![]() |
![]() |
![]() |
#12 |
Old Skool Club
![]() Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: Replacing the Dash
Maybe you need a new post, asking which aftermarket AC (HVAC) system is the best.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
![]() |
![]() |
![]() |
Bookmarks |
|
|