Anybody going to the Austin swapmeet this Sunday 4/10? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

superchevy · 04-05-2011, 10:14 AM

I'll be there. Bringing lots of 67-72 parts...mostly small parts, but also '72 GMC grille, upper grille bar, trim etc.

It's Sunday only. 9-5pm. $10 a space to sell. Free to buyers.
Here's a Facebook link:

http://www.facebook.com/AustinSwapMeet

Tmwoodall · 04-05-2011, 10:33 AM

Quote:

Originally Posted by superchevy

I'll be there. Bringing lots of 67-72 parts...mostly small parts, but also '72 GMC grille, upper grille bar, trim etc.

It's Sunday only. 9-5pm. $10 a space to sell. Free to buyers.
Here's a Facebook link:

http://www.facebook.com/AustinSwapMeet

Thanks for posting it, maybe I will now. I have a bunch of 687-72 stuff I want gone. I'd love for it all to be gone in one day.

That is literally right behind a rental we own. I used to run my dogs on the tract of land between the VFW and Yager just north of there. Lots of hobos up in those woods. A couple of permanent camps even.

Hook'em · 04-05-2011, 07:35 PM

I may try to make it by. I don't need anything specific, but these trucks can always use something.

mbgmike · 04-06-2011, 08:58 AM

I won't be there but our parts will be. Haases Classics sell our parts and they will be there.

Tmwoodall · 04-06-2011, 10:08 AM

Anyone know if there will be a good 67-68 core support there for less than 175? I have a line on a original in SA but would prefer to not make the drive if possible.

superchevy · 04-06-2011, 03:45 PM

I just sold a real nice one for $75, LOL.
A guy came over to buy the fenders off my '67 and wound up buying a lot more of it.

Tmwoodall · 04-06-2011, 03:48 PM

Damn! I have one but the driver side has a bend in it, that is just enough to make me not want to use it. Tried fixing it but the origin of the bend is behind a support so I couldn't figure out a way to fix it without messing the rest of the support up.

**special-K** · 04-06-2011, 07:44 PM

I'd go but it's too far away.

AustinScott · 04-06-2011, 11:45 PM

I don't have facebook, can someone post up the info, I would like to go

Nevermind! I just clicked the link.... no facebook account needed....

nastyc10 · 04-07-2011, 02:08 AM

I might go if I can find the time. I did tell some friends about it.

superchevy · 04-08-2011, 08:54 AM

I've got some NOS trim I'll probably bring out, too.
Also, some old hotrod parts, intakes, valvecovers and such...all big block.
Casey

Jobe72 · 04-10-2011, 10:48 PM

Got me some sweet deals today from superchevy, thanks! Met Hook'em too.

Hook'em · 04-14-2011, 09:45 AM

Got a needed trim piece from Superchevy and found a front bumper guard which looks better than one of the ones currently on the truck. Good to meet by Jobe72 and Superchevy!

04-05-2011, 10:14 AM	#1
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Anybody going to the Austin swapmeet this Sunday 4/10? I'll be there. Bringing lots of 67-72 parts...mostly small parts, but also '72 GMC grille, upper grille bar, trim etc. It's Sunday only. 9-5pm. $10 a space to sell. Free to buyers. Here's a Facebook link: http://www.facebook.com/AustinSwapMeet __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

04-05-2011, 07:35 PM	#3
Hook'em Senior Member Join Date: Jul 2004 Location: Round Rock, Texas Posts: 858	Re: Anybody going to the Austin swapmeet this Sunday 4/10? I may try to make it by. I don't need anything specific, but these trucks can always use something. __________________ Hook'em

04-06-2011, 08:58 AM	#4
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Anybody going to the Austin swapmeet this Sunday 4/10? I won't be there but our parts will be. Haases Classics sell our parts and they will be there.

04-06-2011, 10:08 AM	#5
Tmwoodall Registered User Join Date: Jan 2011 Location: Austin, TX Posts: 632	Re: Anybody going to the Austin swapmeet this Sunday 4/10? Anyone know if there will be a good 67-68 core support there for less than 175? I have a line on a original in SA but would prefer to not make the drive if possible. __________________ www.tomthetruck.blogspot.com <-- Aka build thread.

04-06-2011, 03:45 PM	#6
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Re: Anybody going to the Austin swapmeet this Sunday 4/10? I just sold a real nice one for $75, LOL. A guy came over to buy the fenders off my '67 and wound up buying a lot more of it. __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

04-06-2011, 03:48 PM	#7
Tmwoodall Registered User Join Date: Jan 2011 Location: Austin, TX Posts: 632	Re: Anybody going to the Austin swapmeet this Sunday 4/10? Damn! I have one but the driver side has a bend in it, that is just enough to make me not want to use it. Tried fixing it but the origin of the bend is behind a support so I couldn't figure out a way to fix it without messing the rest of the support up. __________________ www.tomthetruck.blogspot.com <-- Aka build thread.

04-06-2011, 07:44 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Anybody going to the Austin swapmeet this Sunday 4/10? I'd go but it's too far away. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-06-2011, 11:45 PM	#9
AustinScott Registered User Join Date: Dec 2007 Location: Southington CT Posts: 548	Re: Anybody going to the Austin swapmeet this Sunday 4/10? I don't have facebook, can someone post up the info, I would like to go Nevermind! I just clicked the link.... no facebook account needed.... Last edited by AustinScott; 04-06-2011 at 11:46 PM.

04-07-2011, 02:08 AM	#10
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Anybody going to the Austin swapmeet this Sunday 4/10? I might go if I can find the time. I did tell some friends about it.

04-08-2011, 08:54 AM	#11
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Re: Anybody going to the Austin swapmeet this Sunday 4/10? I've got some NOS trim I'll probably bring out, too. Also, some old hotrod parts, intakes, valvecovers and such...all big block. Casey __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

04-10-2011, 10:48 PM	#12
Jobe72 Registered User Join Date: Mar 2010 Location: Austin, TX Posts: 299	Re: Anybody going to the Austin swapmeet this Sunday 4/10? Got me some sweet deals today from superchevy, thanks! Met Hook'em too. __________________ 1972 GMC Sierra LWB (Aquafresh) 1962 Cadillac Convertible 1962 Cadillac Sedan project

04-14-2011, 09:45 AM	#13
Hook'em Senior Member Join Date: Jul 2004 Location: Round Rock, Texas Posts: 858	Re: Anybody going to the Austin swapmeet this Sunday 4/10? Got a needed trim piece from Superchevy and found a front bumper guard which looks better than one of the ones currently on the truck. Good to meet by Jobe72 and Superchevy! __________________ Hook'em



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.