ECE Parts & Accessories F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PTS Kustoms · 01-05-2005, 12:20 AM

Last part of the lot

I will pay the freight only to 48 lower states.

HOTRODS TO HELL

HOTRODS TO HELL REAR SUSPENSION KIT W/ TRAILING ARMS. GO TO WWW.HOTRODSTOHELL.NET FOR DETAILS. OVER $1400.00 INVESTED NOW $850.00

.

Bamm · 01-05-2005, 12:41 AM

I'm looking for a urethane body mount bushing kit. Have you got anything like that? Thanks, .....Jerry

PTS Kustoms · 01-05-2005, 12:52 AM

Hello!

Sorry I do not havy any urethane mounts. What brand are you interested in?

Perry

Bamm · 01-05-2005, 12:58 AM

Not sure. Don't want to hijack your thread with discussion of bushings, but I don't know, maybe Prothane or Energy Suspension?

68LSS1 · 01-05-2005, 04:12 AM

Perry, what's up? I take it your frame wasn't any good and going to try something else? Were you planning on running the ECE center cross member with the HTH kit? I was looking at that but was going to run 3 1/2" exhaust. Is there enough there to open it up? I assume that the reason you got it not powder coated was to relocate the mounts for the trailing arms? I was also thinking of welding a plate to pick up the bottom two holes and adding to more on the cross member to be able to move the mounting point because lowering it just doesn't make since (mathematically). Let me know what your plans were with this.

arkracing · 01-05-2005, 09:52 AM

will the 5-lug axles fit in my 6-lug '69 rear end or no?

Nevermind i went to thier website and looked up the part number...you have direct replacements...not conversions.

good luck on the sales...any particular reason your selling all this good stuff? just need $$$ or don't want a "project"??

**'70_402** · 01-05-2005, 10:11 AM

i was wondering about the spindels.....are they the ones from 71-72?? if so they are only $229 on thier web site. you have them for $238? is this to cover the cost of shipping? if so i might be able to make a road trip to pick them up. how much then? pm me if you would like...

PTS Kustoms · 01-05-2005, 12:06 PM

Hello!

68LSS1 - The frame is no good from the coil springs back. The crossmember was intended to use for the HTH kit and it would work perfect. The holes by looking at it could be opened up another 1/2" overall. Let me know if you want this piece. I also will include the gussets for the brackets.

ARKRACING - The axles fit the 70-72 rear housing per the information I have.

70402 - The spindle price does include shipping.

Thanks for the response guys!

Perry

**Chevy4Life** · 01-05-2005, 12:20 PM

I'll take the auto trans. crossmember. PM Sent.

**'70_402** · 01-05-2005, 12:24 PM

is pickup possible. will be down there soon.

PTS Kustoms · 01-05-2005, 12:32 PM

Hello 70402

Pickup would be great! I would like to have a deposit to hold.

Thanks,

Perry

**'70_402** · 01-05-2005, 12:40 PM

what would price be with pickup.

PTS Kustoms · 01-05-2005, 12:44 PM

The price for pickup is $220.00

Perry

68LSS1 · 01-05-2005, 12:56 PM

Perry, what forms of payment do you take?

PTS Kustoms · 01-05-2005, 01:01 PM

68LSS1 - I can do paypal or you can send a cashiers check.

Thanks,

Perry

**'70_402** · 01-05-2005, 01:02 PM

no thanks PTS... i just balanced the check book...ouch..

thanks anyways...

Rick

71cadc10 · 01-05-2005, 02:24 PM

I will take the ECE front spindles 901-7172.
Sending you a PM to get payment details.

Thanks

71cadc10 · 01-05-2005, 06:15 PM

paypal sent for the spindles.
thanks

PTS Kustoms · 01-05-2005, 06:25 PM

Thanks Andrew....

ggas · 01-05-2005, 06:53 PM

What Is A Hth Kit Is It A Exhaust System And If It Is What Is The Web Site.and Is It Available For Crossmember?

JHickson6 · 01-05-2005, 09:45 PM

what year of frame is the power steering gearbox for?

Jared

PTS Kustoms · 01-05-2005, 11:50 PM

Hello!

The power steering box will fit 67-72 frames for sure. Maybe the same box can be used on a different model and year truck

Thanks,

Perry

68w/sbc406 · 01-06-2005, 12:22 AM

69-87 1/2 ton 2wd boxes are all the same, except in like 81 they went to metric fittings. for a 67 frame you will need to dimple your frame

Deuce · 01-06-2005, 01:49 PM

Does your H2H kit include trailing arms??

PTS Kustoms · 01-06-2005, 01:51 PM

Hello!

The HTH kit does include their trailing arms...

Thanks,

Perry

01-05-2005, 12:20 AM	#1
PTS Kustoms Registered User Join Date: Feb 2004 Location: Roswell, N.M. Posts: 210	ECE Parts & Accessories F/S Last part of the lot I will pay the freight only to 48 lower states. HOTRODS TO HELL HOTRODS TO HELL REAR SUSPENSION KIT W/ TRAILING ARMS. GO TO WWW.HOTRODSTOHELL.NET FOR DETAILS. OVER $1400.00 INVESTED NOW $850.00 . Last edited by PTS Kustoms; 03-31-2005 at 08:33 PM.

01-05-2005, 12:41 AM	#2
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	I'm looking for a urethane body mount bushing kit. Have you got anything like that? Thanks, .....Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-05-2005, 12:58 AM	#4
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Not sure. Don't want to hijack your thread with discussion of bushings, but I don't know, maybe Prothane or Energy Suspension? __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-05-2005, 04:12 AM	#5
68LSS1 Registered User Join Date: Dec 2002 Location: Tampa Posts: 1,191	Perry, what's up? I take it your frame wasn't any good and going to try something else? Were you planning on running the ECE center cross member with the HTH kit? I was looking at that but was going to run 3 1/2" exhaust. Is there enough there to open it up? I assume that the reason you got it not powder coated was to relocate the mounts for the trailing arms? I was also thinking of welding a plate to pick up the bottom two holes and adding to more on the cross member to be able to move the mounting point because lowering it just doesn't make since (mathematically). Let me know what your plans were with this. __________________ '68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc

01-05-2005, 09:52 AM	#6
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	will the 5-lug axles fit in my 6-lug '69 rear end or no? Nevermind i went to thier website and looked up the part number...you have direct replacements...not conversions. good luck on the sales...any particular reason your selling all this good stuff? just need $$$ or don't want a "project"?? __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered Last edited by arkracing; 01-05-2005 at 10:02 AM.

01-05-2005, 12:52 AM	#3
PTS Kustoms Registered User Join Date: Feb 2004 Location: Roswell, N.M. Posts: 210	Hello! Sorry I do not havy any urethane mounts. What brand are you interested in? Perry

01-05-2005, 10:11 AM	#7
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	i was wondering about the spindels.....are they the ones from 71-72?? if so they are only $229 on thier web site. you have them for $238? is this to cover the cost of shipping? if so i might be able to make a road trip to pick them up. how much then? pm me if you would like... __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

01-05-2005, 12:06 PM	#8
PTS Kustoms Registered User Join Date: Feb 2004 Location: Roswell, N.M. Posts: 210	Hello! 68LSS1 - The frame is no good from the coil springs back. The crossmember was intended to use for the HTH kit and it would work perfect. The holes by looking at it could be opened up another 1/2" overall. Let me know if you want this piece. I also will include the gussets for the brackets. ARKRACING - The axles fit the 70-72 rear housing per the information I have. 70402 - The spindle price does include shipping. Thanks for the response guys! Perry

01-05-2005, 12:20 PM	#9
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 750	I'll take the auto trans. crossmember. PM Sent.

01-05-2005, 12:24 PM	#10
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	is pickup possible. will be down there soon. __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

01-05-2005, 12:32 PM	#11
PTS Kustoms Registered User Join Date: Feb 2004 Location: Roswell, N.M. Posts: 210	Hello 70402 Pickup would be great! I would like to have a deposit to hold. Thanks, Perry

01-05-2005, 12:40 PM	#12
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	what would price be with pickup. __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

01-05-2005, 12:44 PM	#13
PTS Kustoms Registered User Join Date: Feb 2004 Location: Roswell, N.M. Posts: 210	The price for pickup is $220.00 Perry

01-05-2005, 12:56 PM	#14
68LSS1 Registered User Join Date: Dec 2002 Location: Tampa Posts: 1,191	Perry, what forms of payment do you take? __________________ '68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc

01-05-2005, 01:01 PM	#15
PTS Kustoms Registered User Join Date: Feb 2004 Location: Roswell, N.M. Posts: 210	68LSS1 - I can do paypal or you can send a cashiers check. Thanks, Perry



Register or Log In To remove these advertisements.

01-05-2005, 01:02 PM	#16
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	no thanks PTS... i just balanced the check book...ouch.. thanks anyways... Rick __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

01-05-2005, 02:24 PM	#17
71cadc10 Registered User Join Date: Apr 2004 Location: Boiling Springs, PA Posts: 435	I will take the ECE front spindles 901-7172. Sending you a PM to get payment details. Thanks __________________ 71 C10 long bed, 2003 6.0L, 06GTO E40, T56, 12bolt 4.10 rear

01-05-2005, 06:15 PM	#18
71cadc10 Registered User Join Date: Apr 2004 Location: Boiling Springs, PA Posts: 435	paypal sent for the spindles. thanks __________________ 71 C10 long bed, 2003 6.0L, 06GTO E40, T56, 12bolt 4.10 rear

01-05-2005, 06:25 PM	#19
PTS Kustoms Registered User Join Date: Feb 2004 Location: Roswell, N.M. Posts: 210	Thanks Andrew....

01-05-2005, 06:53 PM	#20
ggas Registered User Join Date: Sep 2004 Location: san antonio Posts: 34	cross member What Is A Hth Kit Is It A Exhaust System And If It Is What Is The Web Site.and Is It Available For Crossmember?

01-05-2005, 09:45 PM	#21
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	what year of frame is the power steering gearbox for? Jared __________________ My Rides 1967 C10 In Pieces for now 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!!

01-05-2005, 11:50 PM	#22
PTS Kustoms Registered User Join Date: Feb 2004 Location: Roswell, N.M. Posts: 210	Hello! The power steering box will fit 67-72 frames for sure. Maybe the same box can be used on a different model and year truck Thanks, Perry

01-06-2005, 12:22 AM	#23
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	69-87 1/2 ton 2wd boxes are all the same, except in like 81 they went to metric fittings. for a 67 frame you will need to dimple your frame __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

01-06-2005, 01:49 PM	#24
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Does your H2H kit include trailing arms?? __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

01-06-2005, 01:51 PM	#25
PTS Kustoms Registered User Join Date: Feb 2004 Location: Roswell, N.M. Posts: 210	Hello! The HTH kit does include their trailing arms... Thanks, Perry

Register or Log In To remove these advertisements.