Reproduction Window Regulator Quality? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Blazerowner** · 05-28-2014, 11:39 PM

I have been thinking of replacing the window regulators in my 72 c10 and was hoping someone would have an opinion on the quality of the repop window regulators. I see they are fairly inexpensive compared to the NOS sets I have seen pop up from time to time. Is it worth it to try and find a NOS set or are the repops a good option? If so is there a vender with better quality than say LMC and is it possible to rebuild my originals? From what I see they are fairly straight forward and it seems the main area that goes bad are the plastic rollers.

67ctener · 05-29-2014, 12:42 AM

Great topic I am also interested in this, ttt

Lanman1972 · 05-29-2014, 07:31 AM

I replaced mine with a set from NAPA. Good quality and fit was perfect.

**CUSTOM/10** · 05-29-2014, 07:55 AM

I just replaced the rollers on mine. I believe I got the rollers & rivets from Classic Parts. They also have replacement crank gear assembly, but I think it was only for 67-71, the 72 has a longer shaft.

Gary

slikside · 05-30-2014, 12:14 AM

Quote:

Originally Posted by CUSTOM/10

I just replaced the rollers on mine. I believe I got the rollers & rivets from Classic Parts. They also have replacement crank gear assembly, but I think it was only for 67-71, the 72 has a longer shaft.

Gary

So how did that work out for you? Would you do it that way again, or would you get new regulators? How long has it been since you replaced them?

I have been considering this route myself. My windows are a little tough to roll up (thinking the rollers are shot), but I think the regulators still operate pretty well. Just don't know which way to lean on this, and haven't torn anything apart yet.

**CUSTOM/10** · 05-30-2014, 07:59 AM

I just did mine and haven't installed them yet. Mine were in nice shape other than the wheels being brittle and broken. I cleaned them up painted them and lubed them before replacing the wheels to make sure they were good. I did have several to choose from and used the best I had. If you go this route, check the pricing on the wheels & rivets, ( LMC gets like $6 a wheel )
Classic Parts give a set of 3 for about the same. Get an extra set just in case you mess one up. I messed up 2 rivets until I figured out how to peen them. If you go this route LMK and I'll let you know how I did mine !

Gary

**Tom Vogel** · 05-29-2014, 08:08 AM

Call Wes at Classic Heartbeat. http://www.classicheartbeat.com/

**GSFMECH** · 05-29-2014, 08:15 AM

I bought a drivers side from Classic truck parts of America for my 72 about 3 years ago. I was surprised how well it worked, no problems at all it works great.

Kyle@FTP · 05-29-2014, 09:54 AM

There is a couple different manufactures that I am aware of. Some are better than others. I know most of the vendors here including myself carry pretty good quality regulators.

**Blazerowner** · 05-29-2014, 12:07 PM

Excellent responses. I will go with a reproduction set. Considering the last NOS set I saw on here went for $350 it will save some money.

**Blazerowner** · 05-29-2014, 02:47 PM

Ordered a set, I will follow up when I get them installed. I'm replacing all the weatherstripping as well.

1972SUPERSB · 05-29-2014, 04:22 PM

I am also using the ones from classic parts no problems. Don't waste your money on NOS ones. The repo ones work just fine

67ctener · 05-29-2014, 06:59 PM

I wish 'brands' between vendors were noted so we can actually compare. I bought a set of counterpart and comparing oe with it they are very similar. The metal on the arms are thinner but the gears and spring seem to be of same quality. They operate nicely just holding them in my hand. I notice it would always get to a spot where it would click as it was retracting. Maybe once all installed how it should be it won't be noticeable. As a whole I've been very pleased with counterpart products

05-28-2014, 11:39 PM	#1
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,954	Reproduction Window Regulator Quality? I have been thinking of replacing the window regulators in my 72 c10 and was hoping someone would have an opinion on the quality of the repop window regulators. I see they are fairly inexpensive compared to the NOS sets I have seen pop up from time to time. Is it worth it to try and find a NOS set or are the repops a good option? If so is there a vender with better quality than say LMC and is it possible to rebuild my originals? From what I see they are fairly straight forward and it seems the main area that goes bad are the plastic rollers. __________________ Kirk 72 Blazer CST 4wd highlander Last edited by Blazerowner; 05-29-2014 at 02:29 AM.

05-29-2014, 12:42 AM	#2
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Reproduction Window Regulator Quality? Great topic I am also interested in this, ttt

05-29-2014, 07:31 AM	#3
Lanman1972 Registered User Join Date: Dec 2013 Location: Omaha NE Posts: 620	Re: Reproduction Window Regulator Quality? I replaced mine with a set from NAPA. Good quality and fit was perfect.

05-29-2014, 07:55 AM	#4
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,833	Re: Reproduction Window Regulator Quality? I just replaced the rollers on mine. I believe I got the rollers & rivets from Classic Parts. They also have replacement crank gear assembly, but I think it was only for 67-71, the 72 has a longer shaft. Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

05-30-2014, 07:59 AM	#6
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,833	Re: Reproduction Window Regulator Quality? I just did mine and haven't installed them yet. Mine were in nice shape other than the wheels being brittle and broken. I cleaned them up painted them and lubed them before replacing the wheels to make sure they were good. I did have several to choose from and used the best I had. If you go this route, check the pricing on the wheels & rivets, ( LMC gets like $6 a wheel ) Classic Parts give a set of 3 for about the same. Get an extra set just in case you mess one up. I messed up 2 rivets until I figured out how to peen them. If you go this route LMK and I'll let you know how I did mine ! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

05-29-2014, 08:08 AM	#7
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Re: Reproduction Window Regulator Quality? Call Wes at Classic Heartbeat. http://www.classicheartbeat.com/

05-29-2014, 08:15 AM	#8
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: Reproduction Window Regulator Quality? I bought a drivers side from Classic truck parts of America for my 72 about 3 years ago. I was surprised how well it worked, no problems at all it works great. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

05-29-2014, 09:54 AM	#9
Kyle@FTP Registered User Join Date: Dec 2013 Location: Escondido Posts: 700	Re: Reproduction Window Regulator Quality? There is a couple different manufactures that I am aware of. Some are better than others. I know most of the vendors here including myself carry pretty good quality regulators.

05-29-2014, 12:07 PM	#10
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,954	Re: Reproduction Window Regulator Quality? Excellent responses. I will go with a reproduction set. Considering the last NOS set I saw on here went for $350 it will save some money. __________________ Kirk 72 Blazer CST 4wd highlander

05-29-2014, 02:47 PM	#11
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,954	Re: Reproduction Window Regulator Quality? Ordered a set, I will follow up when I get them installed. I'm replacing all the weatherstripping as well. __________________ Kirk 72 Blazer CST 4wd highlander

05-29-2014, 04:22 PM	#12
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	Re: Reproduction Window Regulator Quality? I am also using the ones from classic parts no problems. Don't waste your money on NOS ones. The repo ones work just fine __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior

05-29-2014, 06:59 PM	#13
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Reproduction Window Regulator Quality? I wish 'brands' between vendors were noted so we can actually compare. I bought a set of counterpart and comparing oe with it they are very similar. The metal on the arms are thinner but the gears and spring seem to be of same quality. They operate nicely just holding them in my hand. I notice it would always get to a spot where it would click as it was retracting. Maybe once all installed how it should be it won't be noticeable. As a whole I've been very pleased with counterpart products



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.