HuggerCST's '70 SWB CST build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HuggerCST · 06-11-2008, 11:14 PM

I bought this truck in June of '99. It was in descent shape with the usual rusty cab corners and rockers, and the engine had a dead miss, but I liked it alot, so I bought it. I got it home and tried to tune it up, but the dead cylinder had no compression(valve), and it drove my crazy, so I had to tear into it. My plan was to rebuild the engine, fix the rust, repaint it, and drive it. That plan didn't last long. Here's what I started with.

HuggerCST · 06-11-2008, 11:24 PM

I tore it down and one thing led to another. The original engine was in great shape other than the heads. My brother in law owned a machine shop, so he helped me rework the engine. He bored it .020, turned the crank .010, and kept it original other than an RV cam. Since most everything was still there and so original under the hood, I decided to keep everything that way, other than HEI. I figured that I could always add some goodies later. I didn't go into detail on the frame and suspension, because I knew that it wouldn't stay that way if I drove it much, and I have a long dirt driveway. I cleaned it up, reworked the brakes, and repainted it. I also replaced the rockers and cab corners, then painted the cab inside and out. I couldn't find any pics of when I had the cab off.

HuggerCST · 06-11-2008, 11:49 PM

It has sat in the garage most of these years while I collected parts. I work on it when I get time. I have collected and added original style bucket seats, console, tilt, am/fm, speedwarning, cruise, tach, wood bed floor, and 95% of all the new parts that I need to finish it. Last year I had the bed, fenders, tailgate, and hood soda blasted and got it all in primer. I got a crazy idea to put the fuel tank in the rear and hide the fuel filler behind the tail light. Once I finished that, I assembled the bed and parked it again. I plan to go with 6 lug rallies for now, but will probably change everything to 5 lug with disc brakes when I can afford some wheels. Over the years, I seem to be changing from factory original to mild custom with it.

Bob 68327 · 06-11-2008, 11:51 PM

Looks great !!

HuggerCST · 06-11-2008, 11:57 PM

A few more recent pics. (December '07)

67_C-30 · 06-11-2008, 11:51 PM

FINALLY!! I get to see pics of the of the HuggerCST! (I PM'd you about pics of it a while back and you never responded... hurt my feelings a little, but I'm OK!

-j/k) I can't wait to see it finished. That is probably my favorite color combo on these trucks, at least on 69-72's, IMO.

Here's some inspiration for ya if you haven't seen it already!

http://67-72chevytrucks.com/vboard/s...d.php?t=266393

67_C-30 · 06-11-2008, 11:53 PM

Wow! That gas filler is slick!

HuggerCST · 06-12-2008, 12:04 AM

Quote:

Originally Posted by 67_C-30

FINALLY!! I get to see pics of the of the HuggerCST! (I PM'd you about pics of it a while back and you never responded... hurt my feelings a little, but I'm OK!

-j/k) I can't wait to see it finished. That is probably my favorite color combo on these trucks, at least on 69-72's, IMO.

Here's some inspiration for ya if you haven't seen it already!

http://67-72chevytrucks.com/vboard/s...d.php?t=266393

Sorry 67_C-30! I do remember you PMing me now, and I thought that I had responded, but I probably forgot to. That really IS a inspirational thread! Thanks!
Here are the last ones for now. I'm working on the body now, so hopefully I'll get some more paint on this thing soon. Thanks for the comments!

67_C-30 · 06-12-2008, 06:56 AM

Quote:

Originally Posted by HuggerCST

Sorry 67_C-30! I do remember you PMing me now, and I thought that I had responded, but I probably forgot to. That really IS a inspirational thread! Thanks!
Here are the last ones for now. I'm working on the body now, so hopefully I'll get some more paint on this thing soon. Thanks for the comments!

No problem, I was just messin with ya. I added a few more pics to the hugger/white thread for you to enjoy. What wheels do you plan on getting later on?

**GSFMECH** · 06-12-2008, 07:21 AM

Wynne,

It's good to see you have a build thread started on that thing. I hope you make some good progress this summer.

HuggerCST · 06-12-2008, 09:51 AM

Quote:

Originally Posted by 67_C-30

No problem, I was just messin with ya. I added a few more pics to the hugger/white thread for you to enjoy. What wheels do you plan on getting later on?

I'm split between Torque thrust 2s(pic #2) and Crager 390's(or Halibrand sprints)(pic #3), but they will be 17"s. My 3rd choice is chrome rallys. When I change wheels I'll lower it 2/4, or maybe 3/5. This is a pick of BraveDave's truck, close to what I'm shooting for.

**nightmare** · 06-12-2008, 08:47 AM

looks good wynne. can't wait to see it finished. definitely going to watch this one.

72BlckButy · 06-12-2008, 03:05 PM

That thing is going to be one slick ride when it's finished. I love the gas filler mod, very clean.

Nice work, you have one beautiful truck!

**Hart_Rod** · 06-13-2008, 11:51 AM

I've been wondering when you were finally going to start a build thread,

. The truck looks great, post more pictures,

.

BACKYARD88 · 06-13-2008, 04:26 PM

I was wondering when I'd see this thread

Looks good Sir!

HuggerCST · 06-13-2008, 04:56 PM

Yeah I've been putting it off because #1- I don't have alot of pictures; #2 Lazyness; and #3 I didn't want my truck to end up catching the Killer71 disease.

HuggerCST · 06-15-2008, 11:09 PM

Weekend progress- Nothing exciting, but I'm glad to be making progress. I have a aftermarket RF fender, and the wheel opening lip was wavey,(like most aftermarkets seem to be), so I decided to straighten it out. I got it done, but want to block & reprime it one more time. I got the LF fender primed and ready, I welded up the bowtie holes in the hood and got it primed, but I think I'll block & prime it one more time also; and I got the gate done except for the trim holes. Anyone know if my truck should have the lower trim on the gate? Just curious, I've got a new one, so I might as well use it. I've seen it on a few trucks, I just didn't know what year/trim level etc. got that piece of trim.

HuggerCST · 06-15-2008, 11:11 PM

Gate & new trim.

killer71 · 06-15-2008, 11:40 PM

wynne are you doing the paint?

HuggerCST · 06-15-2008, 11:43 PM

Quote:

Originally Posted by killer71

wynne are you doing the paint?

Yes. I do it as a hobby and for side money, which is why this build is taking so long.

killer71 · 06-15-2008, 11:44 PM

Are you capable of show quality? no disrespect intended

HuggerCST · 06-15-2008, 11:56 PM

Quote:

Originally Posted by killer71

Are you capable of show quality? no disrespect intended

This one will be, but I don't have a booth.(yet) I'll be borrowing one for the final paint on this job. I do respectable work, but I don't do it enough to be as good as the pros, or have the best equipment, so the pros can usually find my mistakes. This one is easy because it's not a metallic.

Rokcrln · 06-16-2008, 12:00 AM

Quote:

Originally Posted by killer71

Are you capable of show quality? no disrespect intended

Well he is showing us and the quality looks good to me

Just take your time and color sand and buff everything before it goes back together and you will be very surprised what can be done at home.

Truck looks great so far now just keep it up and don't get burnt out.

Kevin
LFD Inc.

killer71 · 06-16-2008, 12:07 AM

Quote:

Originally Posted by Rokcrln

Well he is showing us and the quality looks good to me

Just take your time and color sand and buff everything before it goes back together and you will be very surprised what can be done at home.

Truck looks great so far now just keep it up and don't get burnt out.

Kevin
LFD Inc.

yep it does look good...that's why i was inquiring

**GSFMECH** · 06-16-2008, 07:02 AM

Guys,

I have seen Wynne's work and he is real good. This truck will be nice.

Wynne, I don't think your truck would have that bottom trim on the tailgate. I know the 71 and 72 Custom Deluxe trucks had it even if it had the big tailgate trim but I have never seen it on a Cheyenne or a Super regardless. I'm not sure if a CST had it or not but I doubt it. Maybe someone else will pipe in.

06-11-2008, 11:51 PM	#4
Bob 68327 72 Chevelle Club Join Date: Jun 2007 Location: Newton , Iowa Posts: 2,052	Re: HuggerCST's '70 SWB CST build Looks great !! __________________ I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker

06-11-2008, 11:57 PM	#5
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: HuggerCST's '70 SWB CST build A few more recent pics. (December '07) Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

06-11-2008, 11:51 PM	#6
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: HuggerCST's '70 SWB CST build FINALLY!! I get to see pics of the of the HuggerCST! (I PM'd you about pics of it a while back and you never responded... hurt my feelings a little, but I'm OK! -j/k) I can't wait to see it finished. That is probably my favorite color combo on these trucks, at least on 69-72's, IMO. Here's some inspiration for ya if you haven't seen it already! http://67-72chevytrucks.com/vboard/s...d.php?t=266393 __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

06-11-2008, 11:53 PM	#7
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: HuggerCST's '70 SWB CST build Wow! That gas filler is slick! __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

06-12-2008, 07:21 AM	#10
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: HuggerCST's '70 SWB CST build Wynne, It's good to see you have a build thread started on that thing. I hope you make some good progress this summer. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 06-12-2008 at 12:06 PM. Reason: spelling

06-11-2008, 11:14 PM	#1
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	HuggerCST's '70 SWB CST build I bought this truck in June of '99. It was in descent shape with the usual rusty cab corners and rockers, and the engine had a dead miss, but I liked it alot, so I bought it. I got it home and tried to tune it up, but the dead cylinder had no compression(valve), and it drove my crazy, so I had to tear into it. My plan was to rebuild the engine, fix the rust, repaint it, and drive it. That plan didn't last long. Here's what I started with. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

06-11-2008, 11:24 PM	#2
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: HuggerCST's '70 SWB CST build I tore it down and one thing led to another. The original engine was in great shape other than the heads. My brother in law owned a machine shop, so he helped me rework the engine. He bored it .020, turned the crank .010, and kept it original other than an RV cam. Since most everything was still there and so original under the hood, I decided to keep everything that way, other than HEI. I figured that I could always add some goodies later. I didn't go into detail on the frame and suspension, because I knew that it wouldn't stay that way if I drove it much, and I have a long dirt driveway. I cleaned it up, reworked the brakes, and repainted it. I also replaced the rockers and cab corners, then painted the cab inside and out. I couldn't find any pics of when I had the cab off. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

06-11-2008, 11:49 PM	#3
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: HuggerCST's '70 SWB CST build It has sat in the garage most of these years while I collected parts. I work on it when I get time. I have collected and added original style bucket seats, console, tilt, am/fm, speedwarning, cruise, tach, wood bed floor, and 95% of all the new parts that I need to finish it. Last year I had the bed, fenders, tailgate, and hood soda blasted and got it all in primer. I got a crazy idea to put the fuel tank in the rear and hide the fuel filler behind the tail light. Once I finished that, I assembled the bed and parked it again. I plan to go with 6 lug rallies for now, but will probably change everything to 5 lug with disc brakes when I can afford some wheels. Over the years, I seem to be changing from factory original to mild custom with it. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

06-12-2008, 03:05 PM	#13
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: HuggerCST's '70 SWB CST build That thing is going to be one slick ride when it's finished. I love the gas filler mod, very clean. Nice work, you have one beautiful truck! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

06-13-2008, 11:51 AM	#14
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: HuggerCST's '70 SWB CST build I've been wondering when you were finally going to start a build thread, . The truck looks great, post more pictures, . __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-13-2008, 04:26 PM	#15
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: HuggerCST's '70 SWB CST build I was wondering when I'd see this thread Looks good Sir! __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

06-13-2008, 04:56 PM	#16
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: HuggerCST's '70 SWB CST build Yeah I've been putting it off because #1- I don't have alot of pictures; #2 Lazyness; and #3 I didn't want my truck to end up catching the Killer71 disease. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

06-15-2008, 11:09 PM	#17
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: HuggerCST's '70 SWB CST build Weekend progress- Nothing exciting, but I'm glad to be making progress. I have a aftermarket RF fender, and the wheel opening lip was wavey,(like most aftermarkets seem to be), so I decided to straighten it out. I got it done, but want to block & reprime it one more time. I got the LF fender primed and ready, I welded up the bowtie holes in the hood and got it primed, but I think I'll block & prime it one more time also; and I got the gate done except for the trim holes. Anyone know if my truck should have the lower trim on the gate? Just curious, I've got a new one, so I might as well use it. I've seen it on a few trucks, I just didn't know what year/trim level etc. got that piece of trim. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 06-15-2008 at 11:21 PM.

06-15-2008, 11:11 PM	#18
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: HuggerCST's '70 SWB CST build Gate & new trim. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

06-15-2008, 11:40 PM	#19
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: HuggerCST's '70 SWB CST build wynne are you doing the paint? __________________ R.I.P. Killer 71 10/26/07



Register or Log In To remove these advertisements.

06-15-2008, 11:44 PM	#21
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: HuggerCST's '70 SWB CST build Are you capable of show quality? no disrespect intended __________________ R.I.P. Killer 71 10/26/07

06-16-2008, 07:02 AM	#25
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: HuggerCST's '70 SWB CST build Guys, I have seen Wynne's work and he is real good. This truck will be nice. Wynne, I don't think your truck would have that bottom trim on the tailgate. I know the 71 and 72 Custom Deluxe trucks had it even if it had the big tailgate trim but I have never seen it on a Cheyenne or a Super regardless. I'm not sure if a CST had it or not but I doubt it. Maybe someone else will pipe in. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 06-16-2008 at 07:02 AM.

Register or Log In To remove these advertisements.