GA 454 Short Block Quick Fuel Carb MSD Igniton Box Spindles

[Bpilcher72]

I have a 454 Short Block for sale. $1500.00 Has an LS7 Steel Crank, Chevy Dimple Rods, Forged .40 over 28cc dome pistons. Solid Roller Cam & Lifters. Motor was blue printed and balanced by Walker Performance in Hiram, GA. Motor has about 700 miles on it and is still currently in my truck and running. I am going to build a 496 Cubic Inch Twin Turbo with a Merlin III Billett Cap block, Callies Magnum Crankshaft, and Carrillo Rods. This engine gets cranks regularly and driven rarely. This has been my project truck but I know that this engine will never stand what I want to put on it so why ruin it. Located in Hiram, GA. If you are close or want to come close you are free to come crank and drive to see if you like the engine. I will be pulling it out in the next 2 weeks. The quick fuel carburetor was put on and never adjusted out of the box. Engine cranks and runs fine with no adjustment. Carburetor has not been apart and fooled with.

Have stock C/10 5lug spindles for sale $25 Each plus shipping
MSD Programmable Digital 6AL-2 Ignition Boxes 6530 $225. plus shipping
Quick Fuel Q750 750cfm Annular Nozzle Carburetor. $400.00 plus shipping
Hooker Super Competition Headers Ceramic Coated - 2 inch Primaries, 3 1/2 inch collector (will fit BBC C/10 1967-1987) $300.00 (New they are $768.00 Summit part #HOK-2840-1HKR

[Bpilcher72]

[nlped]

How low do the headers hang?

[Bpilcher72]

I have 2.5 inch drop spindles and 30.9 inch tall tires, and I've got good ground clearance. I will get down and measure to the ground this evening or tomorrow.

[nlped]

How about a picture of the underside so I can see the ground clearance. Mines going to be pretty low...

[pablo101]

Picture of the msd 6al 2 box...99% sure I'll take it

[Bpilcher72]

Will get you a pic of the box tonight or in the morning

[Bpilcher72]

[Bpilcher72]

[Bpilcher72]

that picture good enough?

[pablo101]

Originally Posted by Bpilcher72

that picture good enough?

I couldn't have asked for any better that's for sure...I'm private messaging you now.

[Bpilcher72]

Sale pending on 6al2 box

[pablo101]

Originally Posted by Bpilcher72

Sale pending on 6al2 box

You have a pm

[pablo101]

Originally Posted by Bpilcher72

Sale pending on 6al2 box

Received the MSD box! Thanks

[pablo101]

Payment sent

[RatPwrd72]

Are the headers still available? How much shipped to 73057? Thanks.

[Bpilcher72]

Headers are still for sale....suppose to pull the motor this week... I'm asking 300.00 for headers. I will try to box them and send them as affordable as possible. Probably post office unless you prefer ups. They are very large and kinda heavy so I don't know if there will be an oversize or not. Will let you know asap. As of now they are yours unless you don't want them

[RatPwrd72]

I'm interested, depending on the shipping charges.

[speedfreak369]

What kinda numbers you think it's putting out

[Bpilcher72]

RATPWRD72....I"m gonna have you concrete numbers Wednesday April 8th..will post soon

[Bpilcher72]

On the engine I was running Dart Pro 1 355cc Runner Heads. So my compression was 8.25:1. I wanted it that way so I could run turbos and not have to run race gas. Through a TH400 and 31 inch tall tires I made 370hp to the tires. With a smaller chamber head your compression ratio would go up greatly and probably make a lot more. It is a good engine. I hate to give it away at that price but it is better than letting is seize up on a stand somewhere.

[Bpilcher72]

Oh and I re-priced the carburetor to $400.00. I didn't realize I had put it at $475. That's still half what it would cost new for barely used.

[Bpilcher72]

RatPwrd72 - sent you a pm

[Bpilcher72]

Ratpwr.....does mayesville have a greyhound station or one close? that would make shipping really cheap....I have boxed them up....

[Bpilcher72]

Ratpwr....I can ship to Pauls Valley, OK through Greyhound Bus Freight for $98.00 pm me if you are interested and we can talk about it....they are boxed up and ready to go.