Rim and trim ring help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gotenntitans · 09-10-2013, 12:07 AM

I have the Vintiques 37 series 15x10 with 5 inch backspace on rear of my truck. Factory rings fit perfectly! I have 15x8 with 4 inch backspace on front of my truck and CANNOT find rings that fit. Vintiques says factory rings should fit. They DON'T. All I've done is scratch one of my front wheels up, bad. I ordered some from Summit and they didn't fit either. They're on the way back to Summit.

I need rings that are wide enough to cover the shoulder of the rim as they are scratched up. I love the way the rears look......just wanting the same look on the front. I've seen some pics on here. Any advice or pics would be helpful. Vintiques has two on the way, but I'm not confident they'll fit even though the guy said they were made for the 15x8 rim.
Posted via Mobile Device

THIS IS WHAT'S ON THE REAR, FITS PERFECTLY!

THIS IS WHAT I GET UP FRONT, THEY WOULDN'T MAKE A MILE DOWN THE ROAD.

THIS IS THE RESULT OF MESSING WITH TRIM RINGS THAT JUST WON'T FIT, EVEN THOUGH THEY ARE SUPPOSED TO FIT ACCORDING TO VINTIQUES.

ANY ADVICE OR PICS OR WHAT YOU'RE RUNNING WILL BE MOST WELCOME. THANKS

Desert1957 · 09-10-2013, 01:37 AM

why didn't you post this in the thread you already started??????

Desert

Gotenntitans · 09-10-2013, 07:38 AM

Where'd my pics go? This is what I have on back, perfect fit!

Posted via Mobile Device
This is what's going on up front.

This is how the rims are eaten up already. Sad.

Why they're upside down???????
Where the original pics went?????
Why I started a new thread? I wanted help and advice with rings. I was hoping others had had this problem and could help me.

Jake Wade · 09-10-2013, 05:49 PM

I don't understand why the Summit trim rings I told you about wont fit your wheels.

I have the exact wheel and they fit perfect. I am very satisfied.

Gotenntitans · 09-11-2013, 08:02 AM

I'm almost wondering if Jegs sent me two Vintiques rims and two that were not Vintiques. The 15x10 boxes had Wheel Vintiques printed in bold black writing. The 15x8 boxes were plain white, except for the size printed on them. Vintiques is working very nicely to try to fix my problem. A sales rep there asked me for lots of pictures of the rims, factory rims, rings, etc.
Posted via Mobile Device

09-10-2013, 12:07 AM	#1
Gotenntitans Registered User Join Date: Aug 2013 Location: Camden, Arkansas Posts: 978	Rim and trim ring help I have the Vintiques 37 series 15x10 with 5 inch backspace on rear of my truck. Factory rings fit perfectly! I have 15x8 with 4 inch backspace on front of my truck and CANNOT find rings that fit. Vintiques says factory rings should fit. They DON'T. All I've done is scratch one of my front wheels up, bad. I ordered some from Summit and they didn't fit either. They're on the way back to Summit. I need rings that are wide enough to cover the shoulder of the rim as they are scratched up. I love the way the rears look......just wanting the same look on the front. I've seen some pics on here. Any advice or pics would be helpful. Vintiques has two on the way, but I'm not confident they'll fit even though the guy said they were made for the 15x8 rim. Posted via Mobile Device THIS IS WHAT'S ON THE REAR, FITS PERFECTLY! THIS IS WHAT I GET UP FRONT, THEY WOULDN'T MAKE A MILE DOWN THE ROAD. THIS IS THE RESULT OF MESSING WITH TRIM RINGS THAT JUST WON'T FIT, EVEN THOUGH THEY ARE SUPPOSED TO FIT ACCORDING TO VINTIQUES. ANY ADVICE OR PICS OR WHAT YOU'RE RUNNING WILL BE MOST WELCOME. THANKS __________________ GoTennTitans 1987 GMC Sierra 1990 GMC Sierra (stolen) 2003 Chevy Silverado Last edited by Gotenntitans; 09-10-2013 at 12:27 AM.

09-10-2013, 01:37 AM	#2
Desert1957 Registered User Join Date: Apr 2009 Location: New Freedom Pa. Posts: 1,335	Re: Rim and trim ring help why didn't you post this in the thread you already started?????? Desert

09-10-2013, 07:38 AM	#3
Gotenntitans Registered User Join Date: Aug 2013 Location: Camden, Arkansas Posts: 978	Re: Rim and trim ring help Where'd my pics go? This is what I have on back, perfect fit! Posted via Mobile Device This is what's going on up front. This is how the rims are eaten up already. Sad. Why they're upside down??????? Where the original pics went????? Why I started a new thread? I wanted help and advice with rings. I was hoping others had had this problem and could help me. __________________ GoTennTitans 1987 GMC Sierra 1990 GMC Sierra (stolen) 2003 Chevy Silverado Last edited by Gotenntitans; 09-10-2013 at 07:48 AM.

09-10-2013, 05:49 PM	#4
Jake Wade Registered User Join Date: Aug 2005 Location: Louisiana Posts: 711	Re: Rim and trim ring help I don't understand why the Summit trim rings I told you about wont fit your wheels. I have the exact wheel and they fit perfect. I am very satisfied.

09-11-2013, 08:02 AM	#5
Gotenntitans Registered User Join Date: Aug 2013 Location: Camden, Arkansas Posts: 978	Re: Rim and trim ring help I'm almost wondering if Jegs sent me two Vintiques rims and two that were not Vintiques. The 15x10 boxes had Wheel Vintiques printed in bold black writing. The 15x8 boxes were plain white, except for the size printed on them. Vintiques is working very nicely to try to fix my problem. A sales rep there asked me for lots of pictures of the rims, factory rims, rings, etc. Posted via Mobile Device __________________ GoTennTitans 1987 GMC Sierra 1990 GMC Sierra (stolen) 2003 Chevy Silverado



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.