AL clean 70 custom truck parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*mrdana60* · 07-31-2011, 01:35 PM

if i have enough hits on this truck i will part it out. trucks is complete except for the bed. it is a air cab and is pretty solid with small amount of rust in rockers.

*mrdana60* · 07-31-2011, 01:39 PM

front passenger fenders i rough under battery and so is radiator support.

good non tilt auto column 150 plus shipping
good dash 75 plus shipping
all the air cond stuff ??? make offer
good blue interior ??

just look at pics and let me know what you think.

*mrdana60* · 07-31-2011, 01:40 PM

[IMG]

[/IMG]

*mrdana60* · 07-31-2011, 01:40 PM

*mrdana60* · 07-31-2011, 01:41 PM

*mrdana60* · 07-31-2011, 01:42 PM

6772iron · 07-31-2011, 05:24 PM

how are corners, supports , above windshield how are the doors I am looking for cab and doors Thanks Brad

Steve Hafner · 07-31-2011, 05:54 PM

Could you take a picture of the seat without the "stuff" on it ? I've been looking for an original blue cloth seat for my 70. Thanks !!!

*mrdana60* · 07-31-2011, 07:45 PM

the seat has some tears on driver side but foam looks good.

the cab is pretty solid. i will get some better pics of the cab and doors.

*mrdana60* · 07-31-2011, 07:48 PM

here is the passenger side rocker

*mrdana60* · 07-31-2011, 07:54 PM

the bad part of the seat

dan s · 07-31-2011, 08:09 PM

How much for upper cab trim including the paint divider with all clips,shipped to 14534 Thanks Dan

skoolbusyeller72 · 07-31-2011, 08:15 PM

How good is the driver door and both mirrors? i really need just the tripods,mine was painted at one time..

mightymouse · 07-31-2011, 08:22 PM

does the am work ? how much for bezle with gauges; radio; and all the knobs?.. shipped to 76036..thanks.johnny

**rob32472** · 07-31-2011, 09:22 PM

interested in the cab can you take pics of the floor?

*mrdana60* · 07-31-2011, 09:59 PM

Quote:

Originally Posted by mightymouse

does the am work ? how much for bezle with gauges; radio; and all the knobs?.. shipped to 76036..thanks.johnny

i havent tried the radio. but if you want all the light and wiper knobs, gauges, and radio. take 125 for gauges, 50 for radio (pending if its good ) and throw the knobs in for free and make it 200 shipped for everything. ?

i ll try and check the radio tomorrow

*mrdana60* · 07-31-2011, 09:57 PM

Quote:

Originally Posted by skoolbusyeller72

How good is the driver door and both mirrors? i really need just the tripods,mine was painted at one time..

drivers door is in good cond not perfect but is not eat up with rust. will get better pics tomorrow of the doors and mirrors.honestly i havent even looked at the mirrors.

*mrdana60* · 08-01-2011, 01:08 PM

Quote:

Originally Posted by skoolbusyeller72

How good is the driver door and both mirrors? i really need just the tripods,mine was painted at one time..

the driver door is in good cond not perfect and the mirrors are in pretty good shape. the glass is out of the driver side but i still have the glass its fine.

*mrdana60* · 07-31-2011, 09:55 PM

Quote:

Originally Posted by dan s

How much for upper cab trim including the paint divider with all clips,shipped to 14534 Thanks Dan

let me know exactly all you want and i ll take 50 shipped ?? for the trim will that work ?

dan s · 08-01-2011, 04:26 AM

Quote:

Originally Posted by mrdana60

let me know exactly all you want and i ll take 50 shipped ?? for the trim will that work ?

$50 sounds good.should be 6 pcs of upper trim -fender/door/cab for each side plus all clips.Also the trim on the back of the cab below the window/I think it is 3 pieces r+l and small center cap . send pics when removed and then give me paypal info. Thanks Dan

*mrdana60* · 08-01-2011, 08:47 AM

Quote:

Originally Posted by dan s

$50 sounds good.should be 6 pcs of upper trim -fender/door/cab for each side plus all clips.Also the trim on the back of the cab below the window/I think it is 3 pieces r+l and small center cap . send pics when removed and then give me paypal info. Thanks Dan

ok i ll try to get it off today. will post pics later

*mrdana60* · 08-01-2011, 10:27 AM

Quote:

Originally Posted by dan s

$50 sounds good.should be 6 pcs of upper trim -fender/door/cab for each side plus all clips.Also the trim on the back of the cab below the window/I think it is 3 pieces r+l and small center cap . send pics when removed and then give me paypal info. Thanks Dan

all the trim is good except for the back drivers side of the paint divider it has a dent in it. but the rest is straight. what you think ?

*mrdana60* · 08-01-2011, 10:54 AM

Quote:

Originally Posted by dan s

$50 sounds good.should be 6 pcs of upper trim -fender/door/cab for each side plus all clips.Also the trim on the back of the cab below the window/I think it is 3 pieces r+l and small center cap . send pics when removed and then give me paypal info. Thanks Dan

this is the dent

reecetas7196 · 07-31-2011, 09:44 PM

can you post some pics of the grill? I might be interested at the right price and condition. thanks, Joe

*mrdana60* · 07-31-2011, 10:02 PM

07-31-2011, 01:35 PM	#1
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	70 custom truck parting out WITH ORIGINAL MOTOR AND COMPLETE AIR SYSTEM if i have enough hits on this truck i will part it out. trucks is complete except for the bed. it is a air cab and is pretty solid with small amount of rust in rockers. Last edited by mrdana60; 08-11-2011 at 11:09 AM.

07-31-2011, 01:39 PM	#2
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: clean 70 custom truck parting out front passenger fenders i rough under battery and so is radiator support. good non tilt auto column 150 plus shipping good dash 75 plus shipping all the air cond stuff ??? make offer good blue interior ?? just look at pics and let me know what you think.

07-31-2011, 01:40 PM	#3
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: clean 70 custom truck parting out [IMG][/IMG]

07-31-2011, 01:40 PM	#4
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: clean 70 custom truck parting out

07-31-2011, 01:41 PM	#5
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: clean 70 custom truck parting out

07-31-2011, 01:42 PM	#6
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: clean 70 custom truck parting out

07-31-2011, 05:24 PM	#7
6772iron Registered User Join Date: Jul 2011 Location: q-ville pa Posts: 33	Re: clean 70 custom truck parting out how are corners, supports , above windshield how are the doors I am looking for cab and doors Thanks Brad

07-31-2011, 05:54 PM	#8
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: clean 70 custom truck parting out Could you take a picture of the seat without the "stuff" on it ? I've been looking for an original blue cloth seat for my 70. Thanks !!! __________________ . . . . Life is short . . . we only have, right now. . . . . My 70 C-10's BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=475526

07-31-2011, 07:45 PM	#9
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: clean 70 custom truck parting out the seat has some tears on driver side but foam looks good. the cab is pretty solid. i will get some better pics of the cab and doors.

07-31-2011, 07:48 PM	#10
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: clean 70 custom truck parting out here is the passenger side rocker

07-31-2011, 07:54 PM	#11
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: clean 70 custom truck parting out the bad part of the seat

07-31-2011, 08:09 PM	#12
dan s Registered User Join Date: Jan 2010 Location: Ormond Beach Florida Posts: 155	Re: clean 70 custom truck parting out How much for upper cab trim including the paint divider with all clips,shipped to 14534 Thanks Dan

07-31-2011, 08:15 PM	#13
skoolbusyeller72 Registered User Join Date: Feb 2011 Location: Ocean Springs ,Ms Posts: 43	Re: clean 70 custom truck parting out How good is the driver door and both mirrors? i really need just the tripods,mine was painted at one time.. __________________ 1972 Custom 10 LWB 1973 V8 Vega wagon 1925 Model T Wrecker 1913 Model T Speedster http://s181.photobucket.com/albums/x...07/72skoolbus/

07-31-2011, 08:22 PM	#14
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	Re: clean 70 custom truck parting out does the am work ? how much for bezle with gauges; radio; and all the knobs?.. shipped to 76036..thanks.johnny

07-31-2011, 09:22 PM	#15
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,504	Re: clean 70 custom truck parting out interested in the cab can you take pics of the floor?



Register or Log In To remove these advertisements.

07-31-2011, 09:44 PM	#24
reecetas7196 Registered User Join Date: Jul 2011 Location: Orange, CA Posts: 64	Re: clean 70 custom truck parting out can you post some pics of the grill? I might be interested at the right price and condition. thanks, Joe

07-31-2011, 10:02 PM	#25
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: clean 70 custom truck parting out

Register or Log In To remove these advertisements.