KS 1966 C10 Part Out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**dtkarst** · 12-09-2018, 07:55 PM

Have a 66 c10 that’s up next for a part out. Not a whole lot left of the cab, one rocker is missing completely and someone cut the living day lights out of the transmission tunnel to get the motor and tranny out of it. Nonetheless here it is for parts or if someone wants to buy it whole that’s fine too. Can get better pictures of the stuff upon request. All prices are obo

Gauge cluster in good shape w/ harness- 75 plus shipping
Glovebox door- 45 plus shipping
Ash tray- 10 plus shipping
Steering wheel with horn cap- 65 plus shipping
In bed spare tire holder (need to double check condition of bottom mounts)-100 shipped
Mirrors(not sure on exact style name) 100 plus shipping

Any other odds and ends or other parts just post I’ll see what I’ve got. As you can tell by the one picture there’s several sources of parts

**dtkarst** · 12-09-2018, 07:56 PM

Few more

**yelmer** · 12-09-2018, 09:26 PM

66 3/4 ton rear springs?

**dtkarst** · 12-09-2018, 09:34 PM

Are they any different than a 65?

**yelmer** · 12-09-2018, 09:39 PM

should be the same can you measure the coil diameter and send a picture ? Thanks

**dtkarst** · 12-09-2018, 10:38 PM

Yes it’ll be a few days before I’m back down there so bare with me

**yelmer** · 12-09-2018, 11:18 PM

No problem

**ScottH** · 12-10-2018, 12:23 AM

hub caps available?

**aotte1** · 12-10-2018, 12:37 AM

Drivers door , three holes for mirror that have factory screws in them, when not used for a mirror. Would like the three screws if their, in useable condition.
Thanks,
Les

**dtkarst** · 12-10-2018, 01:53 AM

Quote:

Originally Posted by aotte1

Drivers door , three holes for mirror that have factory screws in them, when not used for a mirror. Would like the three screws if their, in useable condition.
Thanks,
Les

I believe I’ve got some of them I’ll look when I go back

**GMCNUT** · 12-11-2018, 01:16 AM

Quote:

Originally Posted by aotte1

Drivers door , three holes for mirror that have factory screws in them, when not used for a mirror. Would like the three screws if their, in useable condition.
Thanks,
Les

Les, those exact 100% correct dished top screws are indeed reproduced if you didn't know

**GMCNUT** · 12-11-2018, 01:17 AM

How much for the in-bed spare mount if the bottom mounting flange is not all rotted off from being under all that dirt

**dtkarst** · 12-10-2018, 01:39 AM

Quote:

Originally Posted by ScottH

hub caps available?

Hubcaps are available

1960chevypanel · 12-10-2018, 04:17 AM

What size are the wheels?

**sirJim** · 12-10-2018, 04:58 AM

Do you have any round backup lights? Thanks shipping to 93654. Jim

**dtkarst** · 12-10-2018, 12:15 PM

15” wheels, and I should have some backup lights

**ScottH** · 12-10-2018, 06:12 PM

Thanks, how much 4 the hub cap set shipped to 08753?

**vetnat** · 12-10-2018, 10:51 PM

Looking for a knob (60-63 chev or 60-66 GMC) for wipers/washer switch, and a wiper motor with washers, ideally 60-62(?). Also, need a cut from a stepside fender, the back 10" or so of driver's side.

roll_the_dice · 12-11-2018, 11:01 AM

PM me a price shipped to 31406 for the instrument cluster. I think it is gauges not lights? Thanks

**pdxhall** · 12-12-2018, 01:31 AM

I'm interested in the headlight bezels if available.

**dtkarst** · 12-13-2018, 12:22 AM

I will be going out there, at the latest, this weekend so I’ll get pictures of what I got f the requests

**CustomCab66** · 12-13-2018, 08:24 PM

Second in line for the hub caps

jdl71 · 12-14-2018, 07:18 PM

Radio? Speaker? I'd like to get in line for the hubcaps also.

rickoner · 12-15-2018, 10:16 PM

How's the kick panel around the dimmer switch?

**dtkarst** · 12-16-2018, 01:07 PM

Hubcaps I would like to have 125 plus shipping. They have some dings and not perfect by any means but a nice patina style.

Pdxhall- bezels are available, they have some dents and such but if you’re still needing a set I have several.

Sirjim- I have the outer chrome bezels but no lenses anymore. Let me know if you’re still interested

Aotte- I have those screws still in doors, if I can get them out without tearing the up too bad I’ll give them to you.

Vetnat- did you need chrome or black on the wiper knob?

Rollthedice-I’ll get a quote for you.

Jdl-let me see what I’ve got

12-09-2018, 07:55 PM	#1
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	1966 C10 Part Out Have a 66 c10 that’s up next for a part out. Not a whole lot left of the cab, one rocker is missing completely and someone cut the living day lights out of the transmission tunnel to get the motor and tranny out of it. Nonetheless here it is for parts or if someone wants to buy it whole that’s fine too. Can get better pictures of the stuff upon request. All prices are obo Gauge cluster in good shape w/ harness- 75 plus shipping Glovebox door- 45 plus shipping Ash tray- 10 plus shipping Steering wheel with horn cap- 65 plus shipping In bed spare tire holder (need to double check condition of bottom mounts)-100 shipped Mirrors(not sure on exact style name) 100 plus shipping Any other odds and ends or other parts just post I’ll see what I’ve got. As you can tell by the one picture there’s several sources of parts Attached Images

12-09-2018, 07:56 PM	#2
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Re: 1966 C10 Part Out Few more Attached Images

12-09-2018, 09:26 PM	#3
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: 1966 C10 Part Out 66 3/4 ton rear springs?

12-09-2018, 09:34 PM	#4
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Re: 1966 C10 Part Out Are they any different than a 65?

12-09-2018, 09:39 PM	#5
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: 1966 C10 Part Out should be the same can you measure the coil diameter and send a picture ? Thanks

12-09-2018, 10:38 PM	#6
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Re: 1966 C10 Part Out Yes it’ll be a few days before I’m back down there so bare with me

12-09-2018, 11:18 PM	#7
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: 1966 C10 Part Out No problem

12-10-2018, 12:23 AM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 1966 C10 Part Out hub caps available? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-10-2018, 12:37 AM	#9
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,649	Re: 1966 C10 Part Out Drivers door , three holes for mirror that have factory screws in them, when not used for a mirror. Would like the three screws if their, in useable condition. Thanks, Les

12-11-2018, 01:17 AM	#12
GMCNUT Senior Member Join Date: Jun 2007 Location: Arab Alabama Posts: 1,809	Re: 1966 C10 Part Out How much for the in-bed spare mount if the bottom mounting flange is not all rotted off from being under all that dirt __________________ My Projects and Toys - All 100% Stock 1972 CST "Highlander" Blazer - 350 auto, PS, PB, A/C, Tilt, Tach, AM/FM & Positraction 1966 Chevy SWB Fleetside BBW Custom Cab, #'s matching 327 V8 & Powerglide, factory deluxe heat, PS, PB, Tinted Glass, sway bar 1961 Chevy SWB Fleetside BBW Custom Cab #'s matching 283 V8 & Powerglide w/ uber-rare Cool-Pack A/C, factory PB, deluxe heat, Clock 1961 GMC K1000 4x4 SWB w/ BBW, Custom Cab and numbers matching 305D V6 engine & 4 spd 1960 GMC SWB Fleetside BBW Custom Cab #'s matching 305A V6 & Hydramatic, factory PB, Clock, Tach, Compass, Hood Jet 1959 Chevy SWB Fleetside BBW Custom Cab w/ rare stainless bed trim, #'s matching 283 V8 & Hydramatic, Deluxe Heat, radio, spotlight 1958 Chevy Cameo #'s matching 283 V8 & Hydramatic, radio, window washers, Factory PB 1958 GMC BBW SWB Fleetside Custom Cab, #'s matching 336 V8 Hydramatic, Factory PS, PB, Clock, RSD, Deluxe Heat & Hood Jet 1957 GMC Suburban Pickup (GMC's Cameo) #'s matching 347 V8 Hydramatic, uber-rare vacuum ashtray, Factory PS, PB, Clock, RSD, Hood Jet 1956 Chevy 3800 1 ton w/ rare 9 ft stepside bed, factory 265 V8 w/ Hydramatic, factory PB, Custom Cab, deluxe heat, spotlight and hood jet.

12-10-2018, 04:17 AM	#14
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,618	Re: 1966 C10 Part Out What size are the wheels?

12-10-2018, 04:58 AM	#15
sirJim Senior Member Join Date: Sep 2016 Location: Denmark Posts: 306	Re: 1966 C10 Part Out Do you have any round backup lights? Thanks shipping to 93654. Jim __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=737695 62 burb in the making.

12-10-2018, 12:15 PM	#16
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Re: 1966 C10 Part Out 15” wheels, and I should have some backup lights

12-10-2018, 06:12 PM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 1966 C10 Part Out Thanks, how much 4 the hub cap set shipped to 08753? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-10-2018, 10:51 PM	#18
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 511	Re: 1966 C10 Part Out Looking for a knob (60-63 chev or 60-66 GMC) for wipers/washer switch, and a wiper motor with washers, ideally 60-62(?). Also, need a cut from a stepside fender, the back 10" or so of driver's side. __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it. Last edited by vetnat; 12-10-2018 at 10:52 PM. Reason: need more parts



Register or Log In To remove these advertisements.

12-11-2018, 11:01 AM	#19
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: 1966 C10 Part Out PM me a price shipped to 31406 for the instrument cluster. I think it is gauges not lights? Thanks __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

12-12-2018, 01:31 AM	#20
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,082	Re: 1966 C10 Part Out I'm interested in the headlight bezels if available. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

12-13-2018, 12:22 AM	#21
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Re: 1966 C10 Part Out I will be going out there, at the latest, this weekend so I’ll get pictures of what I got f the requests

12-13-2018, 08:24 PM	#22
CustomCab66 Senior Member Join Date: Aug 2014 Location: Cedar Park, Texas Posts: 326	Re: 1966 C10 Part Out Second in line for the hub caps __________________ My current 66 C-10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=641267 My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw

12-14-2018, 07:18 PM	#23
jdl71 Registered User Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 1966 C10 Part Out Radio? Speaker? I'd like to get in line for the hubcaps also. __________________ Psalm 23 64 C10 66 K20

12-15-2018, 10:16 PM	#24
rickoner Registered User Join Date: Apr 2014 Location: pittsburgh, pa Posts: 258	Re: 1966 C10 Part Out How's the kick panel around the dimmer switch?

12-16-2018, 01:07 PM	#25
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Re: 1966 C10 Part Out Hubcaps I would like to have 125 plus shipping. They have some dings and not perfect by any means but a nice patina style. Pdxhall- bezels are available, they have some dents and such but if you’re still needing a set I have several. Sirjim- I have the outer chrome bezels but no lenses anymore. Let me know if you’re still interested Aotte- I have those screws still in doors, if I can get them out without tearing the up too bad I’ll give them to you. Vetnat- did you need chrome or black on the wiper knob? Rollthedice-I’ll get a quote for you. Jdl-let me see what I’ve got

Register or Log In To remove these advertisements.