![]() |
|
![]() |
#1 |
Registered User
Join Date: Jan 2011
Location: greensboro n.c.
Posts: 51
|
Tubless Or Not
Just bought 67 half ton pick-up, six lug wheels of coarse. This thing has been sitting for a while and one tire is shot, won't hold air so i'm gonna have to put a tire on it just to get it home. The wheel and tire on it now have an inner tube in it(has the original wheels),anybody know if you have to run tubes with these old wheels?
Thanks, 76er |
![]() |
![]() |
![]() |
#2 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Tubless Or Not
if its a one piece wheel, then you don't need tubes. if I'm not mistaken, if you have steel belted radials, you don't want tubes in them.
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Tubless Or Not
sometimes if wheels got really pitted they used tubes//but 1/2 ton c10 came tubeless from the factory in 67
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
|
Re: Tubless Or Not
Back when I worked at a service station, we would on rare occasions tube a tire. It had to be a really new AND really expensive tire to justify the cost.
Posted via Mobile Device
__________________
'70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN |
![]() |
![]() |
![]() |
#5 |
What?
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
|
Re: Tubless Or Not
After an angry woman attacked my 4 brand new BFG mud terrains with an ice pick to their side walls, the shop saved them for me by installing tubes. Saved my bacon for sure, and ran those tires till they were good and used up.
__________________
Chris 1968 K20 Suburban 1972 K10 LWB PU |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2011
Location: greensboro n.c.
Posts: 51
|
![]()
Great,thanks for all the info fellows but now have another problem trying to get this truck home. As i say it's been sitting for about 10 years and to make matters worse,the old man I bought it from had for whatever reason taken the right front wheel and tire off, anyway I put it back on and when tightening the lug nuts down realized that wheel is locked up. Put a 3 foot breaker bar on it, still won't break loose. Anybody have any suggestions? Can't see any means on back of the hub to back break shoes off, is it different than newer cars that have the slot?
76er |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,638
|
Re: Tubless Or Not
The slot is in the front if it's original. Gotta pull off the tire and rim.
|
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Tubless Or Not
try wackin the brake drum with a hammer a few times ,sometimes brake drum is rusted to the brake shoes
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#9 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Tubless Or Not
pull wheel and smack the drum a few times with a big hammer
|
![]() |
![]() |
![]() |
#10 | ||
Registered User
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
|
Re: Tubless Or Not
Quote:
Quote:
One more thing when doing this - you can't use a hammer that is too big. A sledge hammer with a nice long handle works good for this operation. Years ago I was with da-burb at one of his secret junk yards looking to get a new axel for the rear end in my pick-up. The little old man laughed at the hammer I brought with to whack the drum off the junk vehicle. He comes back with a sledge hammer and one whack later I was pulling the now free drum off.
__________________
'70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN |
||
![]() |
![]() |
![]() |
#11 |
Big Red - Now its a SWB!
Join Date: Jun 2009
Location: Oroville, Ca
Posts: 1,624
|
Re: Tubless Or Not
Agreed, BFH is the best method for freeing up drums.
__________________
68 3/4 ton ![]() ![]() 41 3/4 ton ![]() 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's Last edited by Jacfourteen; 02-20-2011 at 04:27 PM. |
![]() |
![]() |
![]() |
#12 |
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: Tubless Or Not
I had a front brake drum come apart (3 pieces) when I was going down the highway in my 67. Bfh might sound like a good idea to get the wheel spining but I wouldn't trust the integrity of the drum after.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|