Fresh 327/350 turbo for sale...cheap! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FuelCellGuy · 11-06-2005, 03:19 PM

I have a small journal .030 over, small journal 327 for sale. My brother had this engine built for the 68 Camaro that I purchased from him. The engine and rebuilt tranny came with the car purchase. The engine has the double-hump 2.02/1.94 heads on the engine. The heads already have screw-in studes and guide plates installed. The engine DOES NOT have a cam and lifters. My brother did this so he could buy the cam and stall to match. Obviously, the tranny DOES NOT have a torque convertor. I am going for something a little more exotic for the Camaro. I hate to see the engine and tranny sit here. The going price is $500 for the engine and $100 for the tranny IF purchased together. The tranny will be $150 if sold seperately. The engine will be $500 either way. Engine must be picked up at my shop. I can load for $0. See attached pictures. P.S. this engine is balanced as well.

scooby3242 · 11-06-2005, 05:09 PM

Is the tranny a 6 inch tail.......where Mineola, Texas.. Im intrested in the tranny if a 6 inch tail..........

aitch · 11-06-2005, 06:27 PM

That would work well in my 79 Nova. I'll have to see how far I am from Mineola.

FuelCellGuy · 11-06-2005, 06:36 PM

scooby,
It is the 6 inch tailshaft. Let's deal!! I am about 2 hours from you.

aitch,
Come on, it can't be too far.

Later, Mark

scooby3242 · 11-06-2005, 08:20 PM

Pm Sent

FuelCellGuy · 11-06-2005, 08:52 PM

Transmission...SOLD!

qksilver · 11-06-2005, 10:28 PM

That is the engine I need for my 68 1/2 4x4 burb, right date code and everything..........
I want it! How do I get it home?
I have done 21,000 miles this year gathering parts, went back to work last week.
Shipping?
Pm me please,
thanks,
Steve

FuelCellGuy · 11-06-2005, 10:45 PM

I am willing to put it on a pallet and ship it. I should have stated that in the original post. I can check on shipping if you like. PM me an address and I'll get to worl on it. Later, Mark

1969 stepside · 05-03-2011, 05:42 PM

Quote:

Originally Posted by FuelCellGuy

I am willing to put it on a pallet and ship it. I should have stated that in the original post. I can check on shipping if you like. PM me an address and I'll get to worl on it. Later, Mark

I am an hour and a half from you. Is the engine still forsale?

67stpside · 11-10-2005, 11:11 PM

Pm sent

qksilver · 11-10-2005, 11:33 PM

I wasn't able to find out anything. If the shipping would be cheaper I would definity buy it but 500 is too much for me right now.
Thanks,
Steve

larry may · 11-10-2005, 11:58 PM

So what is status of the Engine? Still up for sale? Larry

67stpside · 11-11-2005, 12:20 AM

im defently interested if the shipping is not insane

scooby3242 · 11-14-2005, 07:54 PM

Pm'd you again

DesertCat · 05-03-2011, 05:48 PM

5 1/2 year old thread, more likely you'll find aliens in your breakfast burrito

**zicc1835** · 05-03-2011, 06:23 PM

Quote:

Originally Posted by DesertCat

5 1/2 year old thread, more likely you'll find aliens in your breakfast burrito

that made my day too funny

FuelCellGuy · 05-03-2011, 07:44 PM

Damn, I sold that cheap....for 2011 prices....yep....long gone....

11-06-2005, 03:19 PM	#1
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Fresh 327/350 turbo for sale...cheap! I have a small journal .030 over, small journal 327 for sale. My brother had this engine built for the 68 Camaro that I purchased from him. The engine and rebuilt tranny came with the car purchase. The engine has the double-hump 2.02/1.94 heads on the engine. The heads already have screw-in studes and guide plates installed. The engine DOES NOT have a cam and lifters. My brother did this so he could buy the cam and stall to match. Obviously, the tranny DOES NOT have a torque convertor. I am going for something a little more exotic for the Camaro. I hate to see the engine and tranny sit here. The going price is $500 for the engine and $100 for the tranny IF purchased together. The tranny will be $150 if sold seperately. The engine will be $500 either way. Engine must be picked up at my shop. I can load for $0. See attached pictures. P.S. this engine is balanced as well. Attached Images

11-06-2005, 05:09 PM	#2
scooby3242 Registered User Join Date: Apr 2005 Location: Bedford, Tx Posts: 40	Re: Fresh 327/350 turbo for sale...cheap! Is the tranny a 6 inch tail.......where Mineola, Texas.. Im intrested in the tranny if a 6 inch tail.......... __________________ 1973 gmc swb

11-06-2005, 06:27 PM	#3
aitch Senior Member Join Date: Sep 2004 Location: N.W. Arkansas Posts: 456	Re: Fresh 327/350 turbo for sale...cheap! That would work well in my 79 Nova. I'll have to see how far I am from Mineola. __________________ 69 GMC 3/4 ton LWB 383 TH400 Dana 60 '84 300ZX '79 Nova (for sale)

11-06-2005, 06:36 PM	#4
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Fresh 327/350 turbo for sale...cheap! scooby, It is the 6 inch tailshaft. Let's deal!! I am about 2 hours from you. aitch, Come on, it can't be too far. Later, Mark Last edited by FuelCellGuy; 11-06-2005 at 06:38 PM.

11-06-2005, 08:20 PM	#5
scooby3242 Registered User Join Date: Apr 2005 Location: Bedford, Tx Posts: 40	Re: Fresh 327/350 turbo for sale...cheap! Pm Sent __________________ 1973 gmc swb

11-06-2005, 08:52 PM	#6
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Fresh 327/350 turbo for sale...cheap! Transmission...SOLD!

11-06-2005, 10:28 PM	#7
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Fresh 327/350 turbo for sale...cheap! That is the engine I need for my 68 1/2 4x4 burb, right date code and everything.......... I want it! How do I get it home? I have done 21,000 miles this year gathering parts, went back to work last week. Shipping? Pm me please, thanks, Steve

11-06-2005, 10:45 PM	#8
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Fresh 327/350 turbo for sale...cheap! I am willing to put it on a pallet and ship it. I should have stated that in the original post. I can check on shipping if you like. PM me an address and I'll get to worl on it. Later, Mark

11-10-2005, 11:11 PM	#10
67stpside Registered User Join Date: Jun 2005 Location: Indiana Posts: 33	Re: Fresh 327/350 turbo for sale...cheap! Pm sent

11-10-2005, 11:33 PM	#11
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Fresh 327/350 turbo for sale...cheap! I wasn't able to find out anything. If the shipping would be cheaper I would definity buy it but 500 is too much for me right now. Thanks, Steve

11-10-2005, 11:58 PM	#12
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Re: Fresh 327/350 turbo for sale...cheap! So what is status of the Engine? Still up for sale? Larry

11-11-2005, 12:20 AM	#13
67stpside Registered User Join Date: Jun 2005 Location: Indiana Posts: 33	Re: Fresh 327/350 turbo for sale...cheap! im defently interested if the shipping is not insane

11-14-2005, 07:54 PM	#14
scooby3242 Registered User Join Date: Apr 2005 Location: Bedford, Tx Posts: 40	Re: Fresh 327/350 turbo for sale...cheap! Pm'd you again __________________ 1973 gmc swb

05-03-2011, 05:48 PM	#15
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: Fresh 327/350 turbo for sale...cheap! 5 1/2 year old thread, more likely you'll find aliens in your breakfast burrito __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

05-03-2011, 07:44 PM	#17
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Fresh 327/350 turbo for sale...cheap! Damn, I sold that cheap....for 2011 prices....yep....long gone....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.