new repro stepside fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hobby67stepside · 11-20-2003, 10:46 PM

I haven't been monitoring this site much lately so forgive me if this is old material. Has anyone bought the repro step fenders and if so how are they? Good quality? Price? Vendors?

**Classic Heartbeat** · 11-20-2003, 11:04 PM

I have had them in here, and although I haven't fitted them on a truck, I have had them side by side with the origanals. They looked great. I then shipped a set to jdawg in Hawii. WES www.ClassicHeartbeat.com

hobby67stepside · 11-20-2003, 11:20 PM

Wes, how about price? I bought a box that had decent fenders, but they are turning into a lot of work (which I don't mind, I do it myself), but if the price is reasonable maybe I'm wasting my time fixing up the old ones.

**Tim Christian** · 11-20-2003, 11:23 PM

I have a set here at the shop I would sell and you would think you stole them but they would have to be picked up. I can also drop ship you a set if interested? Thanks Tim

*Randy70C-10* · 11-20-2003, 11:24 PM

I just pulled a pair of repro's from a truck that I just parted out, they fit very nicely. I couldn't tell that they were repros except that I knew the owner.

hobby67stepside · 11-21-2003, 12:00 AM

Thanks for the replies. I'm getting the info that the quality is good but still haven't heard a mention of price. Anyone?

*Randy70C-10* · 11-21-2003, 12:08 AM

http://www.classicheartbeat.com/sheetmetal.htm

jay-dawg · 11-21-2003, 12:51 AM

i got the fenders, but I'm still far off from mounting them.

thanks again wes...I finally finished the roll with the box in it. I'll scan them as soon as I can.

jay

**Tim Christian** · 11-21-2003, 01:09 AM

I can ship you a pair for $695.00 + shipping (Truck freight only) Let me know if I can help you. Thanks Tim

hobby67stepside · 11-21-2003, 02:02 AM

Randy, I'm just curious why someone would junk a pickup (if you are parting it out I'm assuming this is the case) with the pretty new repro fenders on it.

dmec · 11-21-2003, 04:34 AM

the vendors at pomona swap meet have them. $300 ea.

jugernot · 11-21-2003, 06:43 AM

I found some really nice originals for my truck. If I needed a pair I would rather use the retro tin rather than the fiber glass.

jay-dawg · 11-21-2003, 09:39 AM

true.but these aren't fiberglass.

*Randy70C-10* · 11-21-2003, 11:20 AM

Quote:

Originally posted by hobby67stepside
Randy, I'm just curious why someone would junk a pickup (if you are parting it out I'm assuming this is the case) with the pretty new repro fenders on it.

The truck was work more in parts than whole. It had no drivetrain and needed alot of work. Some parts had already been removed for his other project before he sold it to me. I would never junk a good truck!!

Also, I mis-read the post the first time.....I didn't realize that he was talking about the rear fenders.

LowSeventy · 11-21-2003, 02:59 PM

I stopped at the Truck Shop in Orange CA the other day, and they had them for $299 each. The guy there said that they are making them. I bought stuff from them before, and the prices are cheaper than anyone I've seen on the board here. They have a cool showroom with stuff even hanging from the ceiling.

hobby67stepside · 11-21-2003, 05:19 PM

Does anyone know of a vendor in Iowa or any of the midwestern states who handles the step fenders?

**Classic Heartbeat** · 11-21-2003, 06:24 PM

hobby67stepside, you have a PM. WES www.ClassicHeartbeat.com

11-20-2003, 10:46 PM	#1
hobby67stepside Registered User Join Date: Dec 2001 Location: NW Iowa Posts: 952	new repro stepside fenders I haven't been monitoring this site much lately so forgive me if this is old material. Has anyone bought the repro step fenders and if so how are they? Good quality? Price? Vendors? __________________ '05 2500 HD Silverado 6.0 liter '97 2500 4X4 454 eng '92 2500 4X4 350 eng '78 K20 4X4 400 eng '70 Boss 302 (owner for 27 years) '57 Ford shortbox 383 stroker TH350 tranny '23 T-bucket (built in '78) '02 Explorer '67 C-10 short step NW Iowa

11-20-2003, 11:04 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,768	I have had them in here, and although I haven't fitted them on a truck, I have had them side by side with the origanals. They looked great. I then shipped a set to jdawg in Hawii. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

11-20-2003, 11:20 PM	#3
hobby67stepside Registered User Join Date: Dec 2001 Location: NW Iowa Posts: 952	Wes, how about price? I bought a box that had decent fenders, but they are turning into a lot of work (which I don't mind, I do it myself), but if the price is reasonable maybe I'm wasting my time fixing up the old ones. __________________ '05 2500 HD Silverado 6.0 liter '97 2500 4X4 454 eng '92 2500 4X4 350 eng '78 K20 4X4 400 eng '70 Boss 302 (owner for 27 years) '57 Ford shortbox 383 stroker TH350 tranny '23 T-bucket (built in '78) '02 Explorer '67 C-10 short step NW Iowa

11-21-2003, 12:00 AM	#6
hobby67stepside Registered User Join Date: Dec 2001 Location: NW Iowa Posts: 952	Thanks for the replies. I'm getting the info that the quality is good but still haven't heard a mention of price. Anyone? __________________ '05 2500 HD Silverado 6.0 liter '97 2500 4X4 454 eng '92 2500 4X4 350 eng '78 K20 4X4 400 eng '70 Boss 302 (owner for 27 years) '57 Ford shortbox 383 stroker TH350 tranny '23 T-bucket (built in '78) '02 Explorer '67 C-10 short step NW Iowa

11-21-2003, 12:51 AM	#8
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	i got the fenders, but I'm still far off from mounting them. thanks again wes...I finally finished the roll with the box in it. I'll scan them as soon as I can. jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

11-20-2003, 11:23 PM	#4
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	I have a set here at the shop I would sell and you would think you stole them but they would have to be picked up. I can also drop ship you a set if interested? Thanks Tim

11-20-2003, 11:24 PM	#5
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	I just pulled a pair of repro's from a truck that I just parted out, they fit very nicely. I couldn't tell that they were repros except that I knew the owner.

11-21-2003, 12:08 AM	#7
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	http://www.classicheartbeat.com/sheetmetal.htm

11-21-2003, 01:09 AM	#9
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	I can ship you a pair for $695.00 + shipping (Truck freight only) Let me know if I can help you. Thanks Tim

11-21-2003, 02:02 AM	#10
hobby67stepside Registered User Join Date: Dec 2001 Location: NW Iowa Posts: 952	Randy, I'm just curious why someone would junk a pickup (if you are parting it out I'm assuming this is the case) with the pretty new repro fenders on it. __________________ '05 2500 HD Silverado 6.0 liter '97 2500 4X4 454 eng '92 2500 4X4 350 eng '78 K20 4X4 400 eng '70 Boss 302 (owner for 27 years) '57 Ford shortbox 383 stroker TH350 tranny '23 T-bucket (built in '78) '02 Explorer '67 C-10 short step NW Iowa

11-21-2003, 04:34 AM	#11
dmec Senior Member Join Date: Jun 2000 Location: yucaipa ca Posts: 580	the vendors at pomona swap meet have them. $300 ea.

11-21-2003, 06:43 AM	#12
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	I found some really nice originals for my truck. If I needed a pair I would rather use the retro tin rather than the fiber glass.

11-21-2003, 09:39 AM	#13
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	true.but these aren't fiberglass. __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

11-21-2003, 02:59 PM	#15
LowSeventy Registered User Join Date: Jul 2002 Location: Pasadena, CA Posts: 67	I stopped at the Truck Shop in Orange CA the other day, and they had them for $299 each. The guy there said that they are making them. I bought stuff from them before, and the prices are cheaper than anyone I've seen on the board here. They have a cool showroom with stuff even hanging from the ceiling.

11-21-2003, 05:19 PM	#16
hobby67stepside Registered User Join Date: Dec 2001 Location: NW Iowa Posts: 952	Does anyone know of a vendor in Iowa or any of the midwestern states who handles the step fenders? __________________ '05 2500 HD Silverado 6.0 liter '97 2500 4X4 454 eng '92 2500 4X4 350 eng '78 K20 4X4 400 eng '70 Boss 302 (owner for 27 years) '57 Ford shortbox 383 stroker TH350 tranny '23 T-bucket (built in '78) '02 Explorer '67 C-10 short step NW Iowa



Register or Log In To remove these advertisements.

11-21-2003, 06:24 PM	#17
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,768	hobby67stepside, you have a PM. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

Register or Log In To remove these advertisements.