|
03-09-2015, 10:16 PM | #1 |
Registered User
Join Date: Jan 2015
Location: Edmonton, AB
Posts: 21
|
LS Steam tube routing
I've been doing some googling on the best way to re-route the steam tube on a LS swap and someone said to drill and tap the thermostat cover and hook the tube there..?? Has anyone else ever heard of this ?? Any other suggestions ? It seems like the majority drill and tap the water pump...!!
|
03-10-2015, 12:16 AM | #2 |
Registered User
Join Date: Feb 2012
Location: Southern Ohio
Posts: 292
|
Re: LS Steam tube routing
Indeed, drill and tap the water pump is one of several solutions.
You can also use a later model radiator with the steam tube inlet (and correct size hoses to match the smaller LS inlet/outlet), or weld in a port on the radiator side tanks. For my C10 LS swap, I used an F-body water pump and Dirty Dingo spacers that already included a tapped fitting for the steam line. |
03-10-2015, 01:30 AM | #3 |
Registered User
Join Date: Dec 2011
Location: Hanford,ca
Posts: 193
|
Re: LS Steam tube routing
You could also use the dorman fitting that ties into the 3/4" heater hose. Easy and cheap.
|
03-10-2015, 10:31 AM | #4 | |
Senior Member
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,373
|
Re: LS Steam tube routing
Quote:
__________________
A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! |
|
03-10-2015, 11:50 AM | #5 |
Registered User
Join Date: Jul 2010
Location: Willingboro, NJ
Posts: 489
|
Re: LS Steam tube routing
On another project LS we plumbed the steam vent right into the top radiator hose via inline sensor adapter in the hose, add a 90' fitting to clean up the vent hose, two spiffy looking clamps and it works as advertised. We looked at the options and our water pump housing on our 5.3 had the integrated thermostat assembly from the factory (poor design) so if we drilled and tapped the housing would not be a salvageable core in the event it had to be pulled.
Paul
__________________
Retired USAF - No rockets, no mortars, no bad guys shooting...No stress!!! My Build Thread: Project 72' Green http://67-72chevytrucks.com/vboard/s...d.php?t=587932 |
03-10-2015, 12:51 PM | #6 |
Registered User
Join Date: Dec 2011
Location: Hanford,ca
Posts: 193
|
Re: LS Steam tube routing
Dorman part #47112. Splices into youre 3/4" heater hose line and has a 1/4" hose barb for the steam line. Works and is the easiest solution.
|
03-10-2015, 01:55 PM | #7 |
Registered User
Join Date: Oct 2014
Location: Mesa AZ (Near Phoenix)
Posts: 2,302
|
Re: LS Steam tube routing
I drilled an 1/8" pipe size hole right in the top of the water pump below the hose. Then tapped it to accept a brass fitting that was 1/8" male pipe thread on one side and barbed end on the other (got it at Ace hardware). Then you take the line coming out of the drivers side head and attach it to the barb. Simple.
I have a late model (new) radiator that has a port for this hose and still did this as it cleans it up a bit. Oh yeah, it's in a 67 Chevelle if that matters.
__________________
"Life is too short to drive a boring vehicle". Later, Wayne |
08-20-2017, 07:53 PM | #8 |
Registered User
Join Date: Sep 2014
Location: Knoxville,Tn
Posts: 506
|
Re: LS Steam tube routing
Old thread but new video explanation https://www.youtube.com/watch?v=curX7m9BPeg
Posted via Mobile Device |
01-12-2024, 09:20 PM | #9 |
Senior Member
Join Date: Mar 2015
Location: washington
Posts: 2,280
|
Re: LS Steam tube routing
From the Dorman site; Heater Hose Connectors - 3/4 In. X 3/8 In. X 3/4 In. Tee - Plastic
The vent hose is smaller than the 3/8" stub end, isn't it? One I found on Amazon. It doesn't give the stub end diameter but in the comments it's listed as excellent for LS conversions. It is also metal not plastic like the Dorman part. It is also slightly more expensive at $18.24. https://www.amazon.com/Four-Seasons-...e%2C159&sr=1-1 Last edited by Accelo; 01-13-2024 at 02:01 PM. |
Bookmarks |
|
|