AR WTB original 4-speed yoke - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**clemdaddy** · 11-16-2018, 08:47 AM

We have a 1/2 ton enclosed driveshaft rearend and the 4-speed granny we have came out of a 1-ton truck. Needed is the a 1/2 ton yoke to couple to the drive shaft. See the pictures below of the parts we need. Thanks if you can help out.

**clemdaddy** · 11-20-2018, 06:15 PM

The trans is a sm420 enclosed driveline or torque tube, 1947-53 for a half ton truck. The yoke is for a 10 spline output shaft. It's all I need to have a running truck.

Really hoping someone who changed to a V-8 / Auto in their truck would have one of these laying around. Or perhaps a lead to find one... Offer $100 if you have it.

Thanks, Clemdaddy

mick53 · 11-21-2018, 11:10 PM

Quote:

Originally Posted by clemdaddy

The trans is a sm420 enclosed driveline or torque tube, 1947-53 for a half ton truck. The yoke is for a 10 spline output shaft. It's all I need to have a running truck.

Really hoping someone who changed to a V-8 / Auto in their truck would have one of these laying around. Or perhaps a lead to find one... Offer $100 if you have it.

Thanks, Clemdaddy

I have a couple of trans laying in the shop. You need the trans end? If I have one it's free.

**clemdaddy** · 11-25-2018, 10:37 AM

Would anyone know of a used parts dealer with lots of old chevy parts and possibly have a phone number. Any help would be greatly appreciated.

**paulspickupparts** · 12-01-2018, 02:40 PM

I have the yoke. I do not think I have the bolts and clamps. Had them but mis placed. My cell is 4O2 643 5369. Thanks

**paulspickupparts** · 12-08-2018, 06:54 PM

Clem , I think I was able to get everything you need . Ended up that it came from about 4 different trucks but should have everything. I gave you a call and left a message. Could ship on Monday. Thanks Paul

11-16-2018, 08:47 AM	#1
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	WTB original 4-speed yoke We have a 1/2 ton enclosed driveshaft rearend and the 4-speed granny we have came out of a 1-ton truck. Needed is the a 1/2 ton yoke to couple to the drive shaft. See the pictures below of the parts we need. Thanks if you can help out. Attached Images

11-20-2018, 06:15 PM	#2
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: WTB original 4-speed yoke The trans is a sm420 enclosed driveline or torque tube, 1947-53 for a half ton truck. The yoke is for a 10 spline output shaft. It's all I need to have a running truck. Really hoping someone who changed to a V-8 / Auto in their truck would have one of these laying around. Or perhaps a lead to find one... Offer $100 if you have it. Thanks, Clemdaddy

11-25-2018, 10:37 AM	#4
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: WTB original 4-speed yoke Would anyone know of a used parts dealer with lots of old chevy parts and possibly have a phone number. Any help would be greatly appreciated.

12-01-2018, 02:40 PM	#5
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: WTB original 4-speed yoke I have the yoke. I do not think I have the bolts and clamps. Had them but mis placed. My cell is 4O2 643 5369. Thanks

12-08-2018, 06:54 PM	#6
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: WTB original 4-speed yoke Clem , I think I was able to get everything you need . Ended up that it came from about 4 different trucks but should have everything. I gave you a call and left a message. Could ship on Monday. Thanks Paul



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.