Chassis and Cab work - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*lghtng2* · 04-09-2009, 11:19 AM

So I need a cab and bed stand so I can store and move it around by myself without having to man handle it everytime I want to move it. I remember a thread on here of something that is exactly what I need.
http://67-72chevytrucks.com/vboard/s...=242910&page=7

I also did some research and found this article quite usefull. http://www.webrodder.com/article.php?AID=507&SID=60

*lghtng2* · 04-09-2009, 11:49 AM

.... All credit goes to this guy Chevyman63 for inspiring me to do this, basing the build off his design; I might have to slightly tweak it because mines a long bed

Chevyman63
http://www.67-72chevytrucks.com/vboa...d.php?t=216001

Longhorn Man · 04-09-2009, 08:27 PM

since you are talking truck stuff, and not burb stuff, I'll relocate this to the truck board... was posted in the burb section.

*lghtng2* · 04-20-2009, 09:17 AM

Here's the drawing plan step by step, it will be altered slightly as well as a pictures of the build, final hand drawing for my particular setup and build materials.

1. Front Truss 3’7” across 1’ tall

*lghtng2* · 04-20-2009, 09:18 AM

2. Front Center Truss 3’9” across 1’1” tall

*lghtng2* · 04-20-2009, 09:19 AM

3. Back Front Truss 3’5” across 1’4½” tall

*lghtng2* · 04-20-2009, 09:23 AM

4. Back Center Truss 3’5” across 1’6” tall

04-09-2009, 11:19 AM	#1
lghtng2 Account Suspended Join Date: Nov 2008 Location: Peoria, IL Posts: 179	Chassis and Cab work So I need a cab and bed stand so I can store and move it around by myself without having to man handle it everytime I want to move it. I remember a thread on here of something that is exactly what I need. http://67-72chevytrucks.com/vboard/s...=242910&page=7 I also did some research and found this article quite usefull. http://www.webrodder.com/article.php?AID=507&SID=60 Attached Images

04-09-2009, 11:49 AM	#2
lghtng2 Account Suspended Join Date: Nov 2008 Location: Peoria, IL Posts: 179	Re: Chassis and Cab work .... All credit goes to this guy Chevyman63 for inspiring me to do this, basing the build off his design; I might have to slightly tweak it because mines a long bed Chevyman63 http://www.67-72chevytrucks.com/vboa...d.php?t=216001 Last edited by lghtng2; 04-09-2009 at 11:52 AM.

04-09-2009, 08:27 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Chassis and Cab work since you are talking truck stuff, and not burb stuff, I'll relocate this to the truck board... was posted in the burb section.

04-20-2009, 09:17 AM	#4
lghtng2 Account Suspended Join Date: Nov 2008 Location: Peoria, IL Posts: 179	Re: Chassis and Cab work Here's the drawing plan step by step, it will be altered slightly as well as a pictures of the build, final hand drawing for my particular setup and build materials. 1. Front Truss 3’7” across 1’ tall Attached Images

04-20-2009, 09:18 AM	#5
lghtng2 Account Suspended Join Date: Nov 2008 Location: Peoria, IL Posts: 179	Re: Chassis and Cab work 2. Front Center Truss 3’9” across 1’1” tall Attached Images

04-20-2009, 09:19 AM	#6
lghtng2 Account Suspended Join Date: Nov 2008 Location: Peoria, IL Posts: 179	Re: Chassis and Cab work 3. Back Front Truss 3’5” across 1’4½” tall Attached Images

04-20-2009, 09:23 AM	#7
lghtng2 Account Suspended Join Date: Nov 2008 Location: Peoria, IL Posts: 179	Re: Chassis and Cab work 4. Back Center Truss 3’5” across 1’6” tall Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.