88 + steering wheel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muddpile · 09-30-2005, 05:40 PM

I've seen the odd one put into these trucks, but have heard they aren't the easiest things to adapt. I will be installing a van tilt to mount it to, and figure the plain black 4 spoke design will look pretty good. They seem to be a fairly durable wheel, which is just what a truck needs in my opinion. I will be going to the wrecker tomorrow, so is there anything I need to take with me besides the wheel and the horn button? Also, what is so different to installing one of these vs. a grant model or something? Are there any nicer wheels yet in a 15" size or so that I could look for also? Thanks!

**john** · 09-30-2005, 06:42 PM

here it is

There is a writeup by Longhorn man in FAQ. John

muddpile · 09-30-2005, 07:32 PM

Thanks for the link John! Looks like I just need to get the wheel, horn button, pin and spring out of the slip ring correct?

Longhorn Man · 09-30-2005, 07:55 PM

grab the wire too.
As far as the wheel its self goes, it is a direct bolt on.

muddpile · 10-01-2005, 12:23 AM

Thanks Longhorn Man! Looks like I'll be getting a fair amount of goodies at the wrecker tomorrow.

09-30-2005, 05:40 PM	#1
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	88 + steering wheel I've seen the odd one put into these trucks, but have heard they aren't the easiest things to adapt. I will be installing a van tilt to mount it to, and figure the plain black 4 spoke design will look pretty good. They seem to be a fairly durable wheel, which is just what a truck needs in my opinion. I will be going to the wrecker tomorrow, so is there anything I need to take with me besides the wheel and the horn button? Also, what is so different to installing one of these vs. a grant model or something? Are there any nicer wheels yet in a 15" size or so that I could look for also? Thanks! __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

09-30-2005, 06:42 PM	#2
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	here it is There is a writeup by Longhorn man in FAQ. John __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/ Last edited by john; 09-30-2005 at 07:18 PM.

09-30-2005, 07:32 PM	#3
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Thanks for the link John! Looks like I just need to get the wheel, horn button, pin and spring out of the slip ring correct? __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

10-01-2005, 12:23 AM	#5
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Thanks Longhorn Man! Looks like I'll be getting a fair amount of goodies at the wrecker tomorrow. __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

09-30-2005, 07:55 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	grab the wire too. As far as the wheel its self goes, it is a direct bolt on.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.