TN Parting out completely RUST FREE burb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drewskiren · 04-04-2010, 12:17 AM

Parting out 72 Suburban that has documented 79000 original miles. No rust, never wrecked, NEVER PAINTED. purchased from a 93 year old man who bought it new, and kept perfect records of every trip and oil change. Unbelievable!
350 engine purrs and runs perfectly, Tranny shifts as new - $400
Rear upper hatch, mint - $350
Rear lower hatch, perfect - $350
Right quarter panel. 1 tiny dent - $300
Left quarter panel, very straight - $300
Painted bumpers, nearly perfect - $150
Complete rolling chassis, 3/4 ton no rust - $400
More to come

drewskiren · 04-04-2010, 12:29 AM

Complete unmolested headliner with bows - $200
Spare tire well, no rust - $150
Totally complete rear air system with tubes to rear, perfect plastic shroud
wiring harness, dash switch - $250
Front and middle (long) seats original fabric torn but still there - $100 each
Set of 6 black seat belts, perfect. - $175
Complete factory air system for front of truck (same as pickup) - $450
Uncut original factory air dash from another truck - $100
Chrome Chevrolet emblem shown on tailgate - $35

drewskiren · 04-04-2010, 12:39 AM

More pics, and I will have another listing in the truck section later

drewskiren · 04-04-2010, 12:53 AM

seat belt pics
White/ creme set for truck dirty - $50
Part of blue set - $ 20

drewskiren · 04-04-2010, 12:58 AM

Bumpers are not absolutely straight. slight dents noticed on bottom edge of front. here are more pics.

I'm turning in for the night, will reply tomorrow after church and Easter lunch.

**too much stuff** · 04-04-2010, 01:00 AM

How much for the black seat belts? Eric

1949gmc · 04-04-2010, 01:28 AM

Quote:

Originally Posted by drewskiren

Complete factory air system for front of truck (same as pickup) - $450

Interested. Is this price shipped?

drewskiren · 04-04-2010, 11:34 AM

I'll see what shipping is to your town from here in Memphis TN and work with you for the complete front air system.

drewskiren · 04-05-2010, 02:50 PM

Quote:

Originally Posted by 1949gmc

Interested. Is this price shipped?

shipping on greyhound to Kenosha WI ( close?) is about $95. let me know, others are waiting, but you were first.

lyrikz · 04-05-2010, 03:02 PM

Quote:

Originally Posted by CG

Lots of nice parts. I'm curious why you would part out such a nice burb. Did you try to sell it whole and have no takers?

Alot of the sites i go to, if your posting a car, you have to provide the vin number. This just smells of stolen vehicle. Take a rust free vehicle and chop it down and sell it....

Is this site liable for this sorta thing? What about the people buying the parts? Im not saying this rig is 100% stolen, but theres no proof otherwise... Post the vin.

drewskiren · 04-05-2010, 03:40 PM

Quote:

Originally Posted by lyrikz

Alot of the sites i go to, if your posting a car, you have to provide the vin number. This just smells of stolen vehicle. Take a rust free vehicle and chop it down and sell it....

Is this site liable for this sorta thing? What about the people buying the parts? Im not saying this rig is 100% stolen, but theres no proof otherwise... Post the vin.

Are you serious???? Who would steal an old suburban. Have you got nothing better to do than stir up trouble?
Go to my website, drewrenshaw.com , read the about us mission statement, then get back to me on your accusations. I can assure you this is not stolen.

teeitup · 04-04-2010, 12:36 AM

I'd be interested in the seat belts pending pics. Or I should say I know someone who is interested in them. Thanks Randy

Duncan and son · 04-04-2010, 12:51 AM

We will take the bumpers if the are absolutely straight (scratches in paint ok). $150 for both. Thanks Paul

Duncan and son · 04-04-2010, 12:55 AM

Anybody in that neck of the woods coming to Pate last weekend in April ?

**thelonerife** · 04-04-2010, 12:53 AM

Interested in everything motor related and tranny. Can I come hear it run? you can pm me your #. thx

**thelonerife** · 04-04-2010, 01:00 AM

I'll take the blue seatbelts. shipping to 37043. did you see my post #6?

CyC · 04-04-2010, 01:37 AM

I will take the 2nd row full length seat if it is in good shape and shipping isn't too much. Can I see a pic of the seat and get a price shipped to 85379. Thanks

drewskiren · 04-04-2010, 07:56 PM

Quote:

Originally Posted by CyC

I will take the 2nd row full length seat if it is in good shape and shipping isn't too much. Can I see a pic of the seat and get a price shipped to 85379. Thanks

seat is in great shape other than 1 side. foam is all there. I took off armrest for convenience. Don't have any idea who could ship this though. Any ideas??

CyC · 04-05-2010, 01:29 AM

seat is in great shape other than 1 side. foam is all there. I took off armrest for convenience. Don't have any idea who could ship this though. Any ideas??[/QUOTE]

I have heard that greyhound will ship large items at a fair price. I think you just need the dimesions and weight. Try www.shipgreyhound.com Thanks for lookin into it.

**nbrfd007** · 04-14-2010, 10:06 PM

Quote:

Originally Posted by drewskiren

seat is in great shape other than 1 side. foam is all there. I took off armrest for convenience. Don't have any idea who could ship this though. Any ideas??

Do you have the bolts for bolting the seat to the floor?

drewskiren · 04-14-2010, 11:34 PM

Quote:

Originally Posted by nbrfd007

Do you have the bolts for bolting the seat to the floor?

yes

drewskiren · 04-16-2010, 08:39 PM

Front A/C sold and shipped to 1949 gmc in IL. Greyhound is the BEST!

**nbrfd007** · 04-17-2010, 08:47 PM

[QUOTE=drewskiren;3920945]yes[/QUOTE

How much shipped to 72851?
Thanks,
Tim

drewskiren · 04-05-2010, 02:20 PM

Quote:

Originally Posted by CyC

I will take the 2nd row full length seat if it is in good shape and shipping isn't too much. Can I see a pic of the seat and get a price shipped to 85379. Thanks

CYC - price on Greyhound to Phoenix is $82. is that ok?

drewskiren · 04-05-2010, 09:38 PM

GUYS:

Engine/tranny is sold
Chassis is sold
Rear bumper is sold
Upper rear hatch is sold
Black seat belts are sold and mailed

Thanks so much,

Drew

04-04-2010, 12:17 AM	#1
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Parting out completely RUST FREE burb Parting out 72 Suburban that has documented 79000 original miles. No rust, never wrecked, NEVER PAINTED. purchased from a 93 year old man who bought it new, and kept perfect records of every trip and oil change. Unbelievable! 350 engine purrs and runs perfectly, Tranny shifts as new - $400 Rear upper hatch, mint - $350 Rear lower hatch, perfect - $350 Right quarter panel. 1 tiny dent - $300 Left quarter panel, very straight - $300 Painted bumpers, nearly perfect - $150 Complete rolling chassis, 3/4 ton no rust - $400 More to come Attached Images

04-04-2010, 12:29 AM	#2
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: Parting out completely RUST FREE burb Complete unmolested headliner with bows - $200 Spare tire well, no rust - $150 Totally complete rear air system with tubes to rear, perfect plastic shroud wiring harness, dash switch - $250 Front and middle (long) seats original fabric torn but still there - $100 each Set of 6 black seat belts, perfect. - $175 Complete factory air system for front of truck (same as pickup) - $450 Uncut original factory air dash from another truck - $100 Chrome Chevrolet emblem shown on tailgate - $35 Attached Images Last edited by drewskiren; 04-04-2010 at 12:40 AM.

04-04-2010, 12:39 AM	#3
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: Parting out completely RUST FREE burb More pics, and I will have another listing in the truck section later Attached Images

04-04-2010, 12:53 AM	#4
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: Parting out completely RUST FREE burb seat belt pics White/ creme set for truck dirty - $50 Part of blue set - $ 20 Attached Images

04-04-2010, 12:58 AM	#5
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: Parting out completely RUST FREE burb Bumpers are not absolutely straight. slight dents noticed on bottom edge of front. here are more pics. I'm turning in for the night, will reply tomorrow after church and Easter lunch. Attached Images

04-04-2010, 01:00 AM	#6
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: Parting out completely RUST FREE burb How much for the black seat belts? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-04-2010, 11:34 AM	#8
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: Parting out completely RUST FREE burb I'll see what shipping is to your town from here in Memphis TN and work with you for the complete front air system. Last edited by drewskiren; 04-04-2010 at 11:37 AM.

04-04-2010, 12:36 AM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out completely RUST FREE burb I'd be interested in the seat belts pending pics. Or I should say I know someone who is interested in them. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-04-2010 at 12:37 AM.

04-04-2010, 12:51 AM	#13
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: Parting out completely RUST FREE burb We will take the bumpers if the are absolutely straight (scratches in paint ok). $150 for both. Thanks Paul __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

04-04-2010, 12:55 AM	#14
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: Parting out completely RUST FREE burb Anybody in that neck of the woods coming to Pate last weekend in April ? __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

04-04-2010, 12:53 AM	#15
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Parting out completely RUST FREE burb Interested in everything motor related and tranny. Can I come hear it run? you can pm me your #. thx __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687 Last edited by thelonerife; 04-04-2010 at 12:54 AM.

04-04-2010, 01:37 AM	#17
CyC Registered User Join Date: Jan 2010 Location: Surprise, Az Posts: 18	Re: Parting out completely RUST FREE burb I will take the 2nd row full length seat if it is in good shape and shipping isn't too much. Can I see a pic of the seat and get a price shipped to 85379. Thanks

04-05-2010, 01:29 AM	#19
CyC Registered User Join Date: Jan 2010 Location: Surprise, Az Posts: 18	Re: Parting out completely RUST FREE burb seat is in great shape other than 1 side. foam is all there. I took off armrest for convenience. Don't have any idea who could ship this though. Any ideas??[/QUOTE] I have heard that greyhound will ship large items at a fair price. I think you just need the dimesions and weight. Try www.shipgreyhound.com Thanks for lookin into it.

04-16-2010, 08:39 PM	#22
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: Parting out completely RUST FREE burb Front A/C sold and shipped to 1949 gmc in IL. Greyhound is the BEST!

04-17-2010, 08:47 PM	#23
nbrfd007 Senior Member Join Date: Nov 2007 Location: New Blaine, Arkansas Posts: 751	Re: Parting out completely RUST FREE burb [QUOTE=drewskiren;3920945]yes[/QUOTE How much shipped to 72851? Thanks, Tim



Register or Log In To remove these advertisements.

04-05-2010, 09:38 PM	#25
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: Parting out completely RUST FREE burb GUYS: Engine/tranny is sold Chassis is sold Rear bumper is sold Upper rear hatch is sold Black seat belts are sold and mailed Thanks so much, Drew

Register or Log In To remove these advertisements.