TN 1405 Edelbrock carberator - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldblue1968chevy · 04-19-2011, 04:35 PM

Complete. the needles inside were slightly bent (I straightened them).

I swaped parts between this and my 1406 (same thing but electric choke) I thought I had a problem but it did the same thing.

$95 shipped to lower 48 states

It should be fine to install and run as is, may be good idea for a rebuild and to make sure the needle things are perfectly straight.

I can post more pictures if needed..

Paypal is best

oldblue1968chevy · 04-20-2011, 08:25 PM

Too expensive?..Make offer...

Looking for rear drop springs and a tach/vac lense cirucuit board or a 7 hole bezel (nice one)

71stub · 04-20-2011, 08:44 PM

Would you do $70 shipped to 57201? I'm set up with Paypal.

oldblue1968chevy · 04-20-2011, 09:51 PM

I'll do $75

oldblue1968chevy · 04-20-2011, 09:55 PM

To the guy that sent me a msg thru PM, your supposed to post in the thread.

Im a little confused, the PM guy offered $80

71stub · 04-20-2011, 10:30 PM

Haha, Well I'll do $75 if he doesn't take it. Let me know. Thanks.

oldblue1968chevy · 04-20-2011, 10:33 PM

I'll give him till tomorow afternoon? To be fair? Im not exactly sure how this works, just dont wanna do wrong.

**leddzepp** · 04-20-2011, 10:56 PM

Quote:

Originally Posted by oldblue1968chevy

I'll give him till tomorow afternoon? To be fair? Im not exactly sure how this works, just dont wanna do wrong.

Tell him to post here in the thread, per forum rules. As far as I can see, 71Stub posted here first and has accepted your price of $75.

oldblue1968chevy · 04-20-2011, 11:07 PM

Well, should I sell it to him and thats fair? I told him to offer in the thread via msg.

**leddzepp** · 04-20-2011, 11:29 PM

Quote:

Originally Posted by oldblue1968chevy

Well, should I sell it to him and thats fair? I told him to offer in the thread via msg.

You did right by telling him to post here. I personally feel it is fair to sell to 71stub first as he not only followed the rules, but you also posted that you would do the $75. That is my opinion.

oldblue1968chevy · 04-20-2011, 11:31 PM

Im perfectly happy getting $75..

I just dont wanna do nothin' wrong. PM me some info 71stub, i'll reply with my paypal and start boxing it up morrow or the next day, sometimes im a little slow on shipping but try to get it out asap

**leddzepp** · 04-20-2011, 11:40 PM

Quote:

Originally Posted by oldblue1968chevy

Im perfectly happy getting $75..

I just dont wanna do nothin' wrong. PM me some info 71stub, i'll reply with my paypal and start boxing it up morrow or the next day, sometimes im a little slow on shipping but try to get it out asap

If you had sold this via PM to the other member, prior to him posting in this thread, that is against board rules. Since someone else followed the rules by posting here first, you are doing nothing wrong at all by selling him the part.

71stub · 04-21-2011, 04:30 AM

PM Sent. Thanks again!

**specialtyretail** · 04-21-2011, 09:33 AM

Sorry, didn't mean to mess things up. All forums and boards use different rules, we are used to Craigslist mostly. Did not mean to confuse things. Yes, you should sell it to 71stub and I will try not to jump line again. Thanks and again, sorry for the confusion I caused. Fred

71stub · 04-21-2011, 10:07 AM

Let me know when you get the payment. I'm having issues with my paypal.

71stub · 04-21-2011, 10:09 AM

Sorry, Wrong thread! PM me your paypal address and I'll get you your payment!

**leddzepp** · 04-21-2011, 10:18 AM

Hey Fred- No worries. Once you post in the thread, pm's regarding the sale of the part are fine. This way everyone can see where they stand. If someone posts in the thread "I'll take it" and is then is told that the part has already been sold, it gets frustrating and confusing. Thank you for posting!
Posted via Mobile Device

oldblue1968chevy · 04-21-2011, 06:21 PM

So the moral thing to do is sell to stub? lol

oldblue1968chevy · 04-25-2011, 09:47 PM

Sold to Stub! I got the paypal when you sent it, Ill get it in the mail tomorow afternoon!

oldblue1968chevy · 04-27-2011, 01:09 PM

Got it in the mail. Need to check paypal to make sure it sent (never did) but its in the mail

oldblue1968chevy · 05-04-2011, 09:46 PM

Did you get it yet stub?

04-19-2011, 04:35 PM	#1
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	1405 Edelbrock carberator Complete. the needles inside were slightly bent (I straightened them). I swaped parts between this and my 1406 (same thing but electric choke) I thought I had a problem but it did the same thing. $95 shipped to lower 48 states It should be fine to install and run as is, may be good idea for a rebuild and to make sure the needle things are perfectly straight. I can post more pictures if needed.. Paypal is best Attached Images __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-20-2011, 08:25 PM	#2
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 1405 Edelbrock carberator Too expensive?..Make offer... Looking for rear drop springs and a tach/vac lense cirucuit board or a 7 hole bezel (nice one) __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-20-2011, 08:44 PM	#3
71stub Registered User Join Date: Mar 2008 Location: Forman, ND Posts: 365	Re: 1405 Edelbrock carberator Would you do $70 shipped to 57201? I'm set up with Paypal. __________________ 1971 Cheyenne Short Fleet - 468BB/TH400, Tilt, Tach, PS, PB 1967 Custom Short Fleet - 327/4spd

04-20-2011, 09:51 PM	#4
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 1405 Edelbrock carberator I'll do $75 __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-20-2011, 09:55 PM	#5
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 1405 Edelbrock carberator To the guy that sent me a msg thru PM, your supposed to post in the thread. Im a little confused, the PM guy offered $80 __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-20-2011, 10:30 PM	#6
71stub Registered User Join Date: Mar 2008 Location: Forman, ND Posts: 365	Re: 1405 Edelbrock carberator Haha, Well I'll do $75 if he doesn't take it. Let me know. Thanks. __________________ 1971 Cheyenne Short Fleet - 468BB/TH400, Tilt, Tach, PS, PB 1967 Custom Short Fleet - 327/4spd

04-20-2011, 10:33 PM	#7
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 1405 Edelbrock carberator I'll give him till tomorow afternoon? To be fair? Im not exactly sure how this works, just dont wanna do wrong. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-20-2011, 11:07 PM	#9
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 1405 Edelbrock carberator Well, should I sell it to him and thats fair? I told him to offer in the thread via msg. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-20-2011, 11:31 PM	#11
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 1405 Edelbrock carberator Im perfectly happy getting $75.. I just dont wanna do nothin' wrong. PM me some info 71stub, i'll reply with my paypal and start boxing it up morrow or the next day, sometimes im a little slow on shipping but try to get it out asap __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-21-2011, 04:30 AM	#13
71stub Registered User Join Date: Mar 2008 Location: Forman, ND Posts: 365	Re: 1405 Edelbrock carberator PM Sent. Thanks again! __________________ 1971 Cheyenne Short Fleet - 468BB/TH400, Tilt, Tach, PS, PB 1967 Custom Short Fleet - 327/4spd

04-21-2011, 09:33 AM	#14
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: 1405 Edelbrock carberator Sorry, didn't mean to mess things up. All forums and boards use different rules, we are used to Craigslist mostly. Did not mean to confuse things. Yes, you should sell it to 71stub and I will try not to jump line again. Thanks and again, sorry for the confusion I caused. Fred

04-21-2011, 10:07 AM	#15
71stub Registered User Join Date: Mar 2008 Location: Forman, ND Posts: 365	Re: 1405 Edelbrock carberator Let me know when you get the payment. I'm having issues with my paypal. __________________ 1971 Cheyenne Short Fleet - 468BB/TH400, Tilt, Tach, PS, PB 1967 Custom Short Fleet - 327/4spd

04-21-2011, 10:09 AM	#16
71stub Registered User Join Date: Mar 2008 Location: Forman, ND Posts: 365	Re: 1405 Edelbrock carberator Sorry, Wrong thread! PM me your paypal address and I'll get you your payment! __________________ 1971 Cheyenne Short Fleet - 468BB/TH400, Tilt, Tach, PS, PB 1967 Custom Short Fleet - 327/4spd

04-21-2011, 10:18 AM	#17
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: 1405 Edelbrock carberator Hey Fred- No worries. Once you post in the thread, pm's regarding the sale of the part are fine. This way everyone can see where they stand. If someone posts in the thread "I'll take it" and is then is told that the part has already been sold, it gets frustrating and confusing. Thank you for posting! Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

04-21-2011, 06:21 PM	#18
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 1405 Edelbrock carberator So the moral thing to do is sell to stub? lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4



Register or Log In To remove these advertisements.

04-25-2011, 09:47 PM	#19
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 1405 Edelbrock carberator Sold to Stub! I got the paypal when you sent it, Ill get it in the mail tomorow afternoon! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-27-2011, 01:09 PM	#20
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 1405 Edelbrock carberator Got it in the mail. Need to check paypal to make sure it sent (never did) but its in the mail __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

05-04-2011, 09:46 PM	#21
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 1405 Edelbrock carberator Did you get it yet stub? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

Register or Log In To remove these advertisements.