What's the going rate for used stock 10 bolts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

99-LS1-SS · 05-22-2013, 07:01 AM

I've got both a front and rear 10 bolt axle that came out of a 1985 K5 Blazer. Both have brakes on them. I was going to put them in my 1985 K10 truck but, my plans have changed. Should I sell them as a pair or individually? What are they worth? They both appear to be in good working order and they are both have 3.08 gears.

**special-K** · 05-23-2013, 07:52 AM

Whatever you can get is good. They aren't really a very sought after item. They aren't hard to come across,either...at this point.

3 Forever · 06-08-2013, 12:54 PM

I had a similar situation back in 2010 - sold both the front and rear 10 bolt axles off of my '88 K5 after I swapped them out for a Dana 60 front and 14 bolt FF rear. They were open diffs with 3.42 gears, near new brakes, and Moog ball joints in the front. I would say they were both in excellent shape.

I listed them on eBay and Craigslist and received little interest. I finally sold them both through Craigslist for $25. At that point I was happy to get them out of my garage.

05-22-2013, 07:01 AM	#1
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	What's the going rate for used stock 10 bolts I've got both a front and rear 10 bolt axle that came out of a 1985 K5 Blazer. Both have brakes on them. I was going to put them in my 1985 K10 truck but, my plans have changed. Should I sell them as a pair or individually? What are they worth? They both appear to be in good working order and they are both have 3.08 gears. __________________ My 1972 2WD Blazer build 1984 K10 beater truck

05-23-2013, 07:52 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: What's the going rate for used stock 10 bolts Whatever you can get is good. They aren't really a very sought after item. They aren't hard to come across,either...at this point. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-08-2013, 12:54 PM	#3
3 Forever Registered User Join Date: Aug 2012 Location: MN, USA Posts: 5	Re: What's the going rate for used stock 10 bolts I had a similar situation back in 2010 - sold both the front and rear 10 bolt axles off of my '88 K5 after I swapped them out for a Dana 60 front and 14 bolt FF rear. They were open diffs with 3.42 gears, near new brakes, and Moog ball joints in the front. I would say they were both in excellent shape. I listed them on eBay and Craigslist and received little interest. I finally sold them both through Craigslist for $25. At that point I was happy to get them out of my garage.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.