bumper foglights

[stunna]

anybody got pics of lowered or slammed trucks with foglights in the bumper?

[Andy4639]

I don't know about being what you called slamed but I have fog lights in my lowered 71.


getting the front tag frenched:


Preping for paint.



Painted:





Night shot:

[stunna]

Originally Posted by Andy4639

I don't know about being what you called slamed but I have fog lights in my lowered 71.


getting the front tag frenched:


Preping for paint.



Painted:





Night shot:

i was going to french mine in too, but using a 68 front clip, hopefully some others have pics. Yours look very good!

[Andy4639]

Thanks guy's. I did the lights back before any vendor's sold the bumpers with the cutouts. I had a friend @ work do them. I had him do the bumper bolts as well. I had it done back in mid 90's. Just had the tag area done 2 years ago Thanksgiving on the last paint job.

[big mike71]

Originally Posted by Andy4639

I don't know about being what you called slamed but I have fog lights in my lowered 71.


getting the front tag frenched:


Preping for paint.



Painted:





Night shot:

That looks cool, but do you know your bumper is crooked.

[big mike71]

Originally Posted by big mike71

That looks cool, but do you know your bumper is crooked.

After seeing what I posted I feel like an ass. I was a newbee and didn't know better.

[Andy4639]

Originally Posted by big mike71

After seeing what I posted I feel like an ass. I was a newbee and didn't know better.

Yes I know it's one of those things that happen when u drive them. Yes it's still like that today. I just couldn't see going through all of it again.
I had a dog run out in front of me. I almost got stopped. He stoped dead in his tracks though! I hate he died but I couldn't help it. He got out of his owners fence and just darted right out into the road. I was happy he didn't tear it up worse but I did feel bad about the guy's dog.
The worst part was he was standing in the yard and saw it happen!
wylieguy
I have no idea how far off center they are now. That's been awhile since I done it. The opening is 4" though. They are inside the front frame rails also.
I know this is a old thread but I just saw it up again.

[Fizoust]

I dont have anybetter pictures ATM.

I put 4" LED running lights/blinkers in my bumper.

Im tossing the idea around of Blitz blacking my truck, and tinting over them.
Tint because id like to pass inspections with ease.

Please dont pay any attention to the LT1 harness thrown across the fender. ha

[unclewatts]

Looks great!

[hayhauler71]

That is by far one of the nicest install of lights i have seen looks awesome.

[stunna]

anybody else got pics, really wanting to see 67-68 lowered down if not slammed, gotta be some out there.

[wylieguy]

what diameter are the openings for the lights and how far off center?

[LOW DOUGH]

that bumper looks good

[tech1]

LMC Bumper

[chevy72pu]

Originally Posted by tech1

LMC Bumper

/

Where are the turn signals?

[cstm68]

Originally Posted by chevy72pu

/

Where are the turn signals?

looks to me like there in the bottom of the headlights

[daveo68]

Here is mine,got it on ebay.

[chevy72pu]

Originally Posted by cstm68

looks to me like there in the bottom of the headlights

That's what I figured, but couldn't tell from the picture. Your close up shows it great.
I was afraid He would post a pic with his arm out the window.

[amcgeh01]

Originally Posted by tech1

LMC Bumper

VERY NICE... However, when I called LMC after looking at it in the catalog, it states only 67-70 models.. I asked them but it's useless as they have no info and stated if my year (72) is not listed, then I should not order it..?

How much difference can there be between those years.. I have a 72 GMC Jimmy 4x4 and I want this bumper but don't want to end up sending it back either.. Anyone know for sure of the attachment points are the same or different..??

[skorpioskorpio]

71 and 72s have the turn signals in the bumper, that's the difference.

Edit: Oh sorry Jimmy not Chevy, I think the 67-70 is refering to Chevys not GMCs. The GMC bumpers have dips on the top for the turnsignals below the headlights, not sure if it's all years, but my '70 has them. LMC list the bumper for 67-68 GMCs not 67-70 that's the years for Chevy. Every GMC bumper is either 67-68 *OR* 70-72 not sure what the difference is, but I'm curious too.

[68_Step]

I like both the frenched version and the LMC one too. I think I am about to add something else to the list!!

[Hottrucks]

funny thing is we where just talking on another post about this I was thinking of fabbing some lights into the turn signal holes in the bumper or getting a 71/72 bumper I think paint would do my front end in thats why I was thinking of a stock bumper???

heres apic of mine slammed pretty low maybe some photoshop gurus can put a 72 bumper on it??

[mrein3]

Originally Posted by Hottrucks

funny thing is we where just talking on another post about this I was thinking of fabbing some lights into the turn signal holes in the bumper or getting a 71/72 bumper I think paint would do my front end in thats why I was thinking of a stock bumper???

heres apic of mine slammed pretty low maybe some photoshop gurus can put a 72 bumper on it??

Not photoshopped - well except for the license plate. I put a 71/72 bumper on my 4x4. The fog lights came off the shelf at Wal*Mart. I wish I could find a set of lights that fit the hole better but it works for now.

Why does everybody blur or change their license plate? Is it a black helicopter thing?

[mrein3]

Oh and I control them through a relay from a switch in the cab under my ignition switch. The top switch turns on my back-up lights (which also turns off my surge brakes on my bass boat so I can back up the boat trailer). Bottom one is for the fog lights.

[Hottrucks]

dam just what I was looking for...it looks good but I se what you mean by fit.....one ting is why the after market fuel guage.....

but you have a very kool truck and still use it like a truck with a/c

Kool
JEff