|
|
|
05-29-2010, 08:45 AM
|
#1 |
|
Registered User
 Join Date: Oct 2007
Location: Albuquerque, NM
Posts: 158
|
Refinish wooden bed
I need some help picking the correct products to refinish my wooden bed. I would like to do it once and have it last. My truck is always parked in my shop. I will be using polished stainless to hold the planks down.
Do I need to go to a boat shop to get a marine product? Do I use shlack, polyurethane, or what? I have seen some of you guys beds and they look great. I would like mine to come out like that. Thanks, Guy |
|
|
|
05-29-2010, 12:17 PM
|
#2 |
|
Registered User
Join Date: Aug 2009
Location: Alden NY
Posts: 2,705
|
Re: Refinish wooden bed
I've restored a couple of antique boats. For the deepest smoothest finish use a bristle brush and a good grade of marine varnish like Epiphanes or Pettit Captain's 1015. It will take 7 - 10 coats to have a furniture like finish, sanding with 320 and tacking off between each coat.
This is a pic of the 52 Chris I did. Currently working on a 56 Lyman "  "
__________________
1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7 |
|
|
|
|
05-29-2010, 12:34 PM
|
#3 |
|
Registered User
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
|
Re: Refinish wooden bed
That's a beautiful boat. My aunt had one about that year, except the decks were white. My wonderful older brother wrecked it when he was drunk. For a good idea as to what materials to use, check out MAR-K's web site - they have a test on there that they compared the different materials. If you want the least maintenance material, then paint the boards, which is what I did.
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD  Click here to support the board Philippians 4: 6-7 |
|
|
|
|
05-29-2010, 02:56 PM
|
#4 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Refinish wooden bed
the important part is to do the whole board the sides ends and bottoms too// a good bristle brush is very important expect to pay in the $20 range for a high quality brush//thin well the first couple of coats to get deep penetration// dont try and rush make sure each coat is fully dried
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 05-29-2010 at 05:02 PM. |
|
|
|
|
05-29-2010, 04:31 PM
|
#5 | |
|
just can't cover up my redneck
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
|
Re: Refinish wooden bed
cdowns is 100% correct, no matter what brand of material you choose.
I would test-fit the whole thing before finishing too. You don't want to have to do any cutting/drilling or fitting of any kind on your finished boards. It "breaks" the seal you have just created.
__________________
You can review the site's rules here. Quote:
Bad planning on your part does not necessarily constitute an instant emergency on my part.... The great thing about being a pessimist is that you are either pleasantly surprised or right. 
|
|
|
|
|
|
05-29-2010, 08:02 PM
|
#6 |
|
Registered User
Join Date: Oct 2007
Location: Albuquerque, NM
Posts: 158
|
Re: Refinish wooden bed
Thank all of you for your responces.
I think I will go to a boat shop and get a good brush and marine varnish. I like the help I get from this site, it gives me the confidence to go on and tackel the things I've always wanted to do. Beautiful boat by the way! Guy |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
