shaving the MC and booster? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roj2323 · 01-12-2005, 12:33 AM

hey guys,
just curious to know where you are relocating your master cylinder and booster when you shave the firewall. i've gone looking on the net but so far i've had no luck. ideas thoughts pictures and or links would be greatly appreciated.

thanks,
ondrew

**special-K** · 01-12-2005, 07:17 AM

Not sure this is possible with original pedal set-up.Maybe something custom.Do people shave these?I`ve personally never seen it.What about using something prettier?Like for street rods.

Bamm · 01-12-2005, 09:32 AM

No Limit engineering and some other companies have a "universal" brake kit that mounts under the cab to the frame rails. One of the guys on here has this mod done to his suburban, I just can't recall his name. Hope this helps and if you do this, please keep us posted as to how it works. I'm hoping to do this mod, but it will be summer or later before I'll be able to get to it. Thanks, ......Jerry

Purs · 01-12-2005, 10:56 AM

Here's a link to No Limit http://www.nolimit.net/Products/PowerBrake.htm

Bamm · 01-12-2005, 11:00 AM

I've talked to a guy that used this company on his '49 and he said they were great to deal with and no question was a stupid question, if you know what I mean. Sound like top-notch people and they're over here on the east coast so i may use them.
http://mpbrakes.com/universal.htm

supersize75k5 · 01-12-2005, 11:40 AM

Staceydude · 01-12-2005, 12:07 PM

Quote:

Originally Posted by supersize75k5

And.... How was that done.....

Come on man, clue us in. Is that somethign you designed yourself or did you install someones kit.

I think we all want to know man!!!

Thanks

Stace

Bamm · 01-12-2005, 12:26 PM

Is that a "weld-in Universal kit"? You have any info on that? Thanks, .....Jerry

toddtheodd · 01-12-2005, 12:42 PM

Quote:

Originally Posted by Bamm 24

Is that a "weld-in Universal kit"? You have any info on that? Thanks, .....Jerry

You can buy a kit like that here.

supersize75k5 · 01-12-2005, 02:07 PM

yup I got i from them, I did not order the booster and mc with it though,

its a nice kit, just a bolt in deal, but since I had done some work to my frame after shortening it I will have to clearence some things. In my pic it is just sitting in place, not the actual location the booster will wind up at.

Deuce · 01-12-2005, 03:22 PM

Quote:

Originally Posted by toddtheodd

You can buy a kit like that here.

Even that MC would look good in the stock location.

01-12-2005, 12:33 AM	#1
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	shaving the MC and booster? hey guys, just curious to know where you are relocating your master cylinder and booster when you shave the firewall. i've gone looking on the net but so far i've had no luck. ideas thoughts pictures and or links would be greatly appreciated. thanks, ondrew

01-12-2005, 07:17 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Not sure this is possible with original pedal set-up.Maybe something custom.Do people shave these?I`ve personally never seen it.What about using something prettier?Like for street rods. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-12-2005, 09:32 AM	#3
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	No Limit engineering and some other companies have a "universal" brake kit that mounts under the cab to the frame rails. One of the guys on here has this mod done to his suburban, I just can't recall his name. Hope this helps and if you do this, please keep us posted as to how it works. I'm hoping to do this mod, but it will be summer or later before I'll be able to get to it. Thanks, ......Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-12-2005, 10:56 AM	#4
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	Here's a link to No Limit http://www.nolimit.net/Products/PowerBrake.htm __________________ "Experience is what you get when you didn't get what you wanted."

01-12-2005, 11:00 AM	#5
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	I've talked to a guy that used this company on his '49 and he said they were great to deal with and no question was a stupid question, if you know what I mean. Sound like top-notch people and they're over here on the east coast so i may use them. http://mpbrakes.com/universal.htm __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-12-2005, 11:40 AM	#6
supersize75k5 the wierd guy Join Date: Aug 2004 Location: PHX ARIZONA Posts: 78

01-12-2005, 12:26 PM	#8
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Is that a "weld-in Universal kit"? You have any info on that? Thanks, .....Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-12-2005, 02:07 PM	#10
supersize75k5 the wierd guy Join Date: Aug 2004 Location: PHX ARIZONA Posts: 78	yup I got i from them, I did not order the booster and mc with it though, its a nice kit, just a bolt in deal, but since I had done some work to my frame after shortening it I will have to clearence some things. In my pic it is just sitting in place, not the actual location the booster will wind up at.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.