|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
02-18-2004, 06:43 PM
|
#1 |
|
Senior Member
Join Date: Feb 2004
Location: Ponca city now kingfisher Oklahoma
Posts: 1,221
|
Do 73-87 lower and upper arms fit 67=72?
It seems I heard you can swap out 73-87 lower and upper a arms directly into the 67-72 , then using the spindle from the73-87 thus having the disc brakes. I guess you would also use the 73-87tie rods as well. Let me know if I'm right and what else is needed.
__________________
Even the nicest dodge-chrysler is only 2years away from being parked outside of Section 8 housing. |
|
|
|
02-18-2004, 06:53 PM
|
#2 |
|
Registered User
Join Date: Oct 2002
Location: Des Moines WA. (Kent, area)
Posts: 668
|
you are correct, but i think you need a special adapter to connect the 67-72inner tierod to the 73up outter ones.
__________________
70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington . |
|
|
|
|
02-18-2004, 07:42 PM
|
#3 |
|
Senior Member
Join Date: Feb 2004
Location: Ponca city now kingfisher Oklahoma
Posts: 1,221
|
Well if you are changing power steering as well from the 73-87 couldn't you just use the whole bar from pitman arm to idler arm from the 73-87 donor?
|
|
|
|
|
02-18-2004, 07:53 PM
|
#4 |
|
Registered User
Join Date: Oct 2002
Location: Des Moines WA. (Kent, area)
Posts: 668
|
as long as you change the centerlink and idler arm i dont see why not.
__________________
70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington . |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
