Alternator Bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GKsport67 · 03-10-2009, 09:19 PM

I have a homemade alternator bracket,can anyone tell me if i can replace with something else?

...this the only photo i have!!

**americanmusc1e** · 03-10-2009, 09:24 PM

from the photo it dosen't look homemade, it looks like mine

oldblue1968chevy · 03-10-2009, 09:34 PM

dont think thats homade..i want 1 like that thoo it nice

Andy4639 · 03-10-2009, 09:40 PM

That is the correct brace, why do you want another one?

GKsport67 · 03-10-2009, 09:51 PM

Quote:

Originally Posted by Andy4639

That is the correct brace, why do you want another one?

Well,i've changed alternator 5/6 times(due to the 1wire to the original) & its gettin weak. i tighten the belt tight as can be & it seems like it won't last long,so i wanna get 1 b4 it play out.

oldblue1968chevy · 03-10-2009, 09:45 PM

who me, cause mines not like that..its real big and on the other side....id post a pic but im too lazy lol im goin to bed fellas

Longhorn Man · 03-10-2009, 09:57 PM

that's possibly an aftermarket chromed one?
The stock one which looks like that (minus the chrome) should work fine.

Andy4639 · 03-10-2009, 10:01 PM

Yeper's the chrome ones don't hold up to well. Can you take it off and go by a machine shop and have one made.

gcburdic · 03-10-2009, 10:07 PM

I have one available here (2nd pic down) if you are interested!...

http://67-72chevytrucks.com/vboard/s...d.php?t=296740

pumpgas · 03-10-2009, 10:32 PM

To be honest with you the alt bracket is one of the last things in that engine compartment I would be worried about. Fuel pump mounted to the heater box unless the tank is in the wiper cowl isn't installed anywhere near the correct location (electric pumps are supposed to be lower then the tank) let alone the heat from the headers soaking into it. I would also look into the oil dip stick as it looks like it used to have a bolt going to a manifold bolt that would be incorrect for a small block and give incorrect readings.

But as far as the alt bracket goes that other then chrome is correct and in the correct location. What brand of alt are you getting? Also as for the belt slipping I would say that is a pulley alinement issue.

GKsport67 · 03-11-2009, 02:09 AM

Quote:

Originally Posted by pumpgas

To be honest with you the alt bracket is one of the last things in that engine compartment I would be worried about. Fuel pump mounted to the heater box unless the tank is in the wiper cowl isn't installed anywhere near the correct location (electric pumps are supposed to be lower then the tank) let alone the heat from the headers soaking into it. I would also look into the oil dip stick as it looks like it used to have a bolt going to a manifold bolt that would be incorrect for a small block and give incorrect readings.

But as far as the alt bracket goes that other then chrome is correct and in the correct location. What brand of alt are you getting? Also as for the belt slipping I would say that is a pulley alinement issue.

I get that alot about the fuel pump! it starts 1 crank each time(cold r hot).the electric pump does'nt work,its the gold 1 right under it that does. yeah i know it does'nt change te location but it still works fine!
dipstick?

im sure this truck has alot of incorrect stuff about it. Im not a mechanic so if it runs,i run it! when it does'nt ....I PAY!!
thanks though!!

GKsport67 · 03-11-2009, 02:11 AM

Quote:

Originally Posted by gcburdic

I have one available here (2nd pic down) if you are interested!...

http://67-72chevytrucks.com/vboard/s...d.php?t=296740

I need the bottom bracket,...thanks though!

pumpgas · 03-11-2009, 06:13 AM

Here is a quick pic of what it is supposed to look like.

Andy4639 · 03-11-2009, 12:32 AM

Man...you got a good eye. It's weird how so many people can look at a picture and see nothing.

GKsport67 · 03-11-2009, 01:31 AM

I actually was refering to the bottom bracket,not the chrome one on top! sorry guys

Andy4639 · 03-11-2009, 01:46 AM

Know wonder I didn't see all that other stuff then, I can't even see the buttom bracket!!

gcburdic · 03-11-2009, 08:31 AM

not sure if you looked at what I have, but the pic 'pumpgas' posted is what I have available...sorry for any confusion!

sneakysnake · 03-11-2009, 11:29 AM

With headers I think you have to use a bracket like this.
http://hotrodchrome.com/alternatorbrackets.html

GKsport67 · 03-11-2009, 07:34 PM

Quote:

Originally Posted by sneakysnake

With headers I think you have to use a bracket like this.
http://hotrodchrome.com/alternatorbrackets.html

This is what it looks like!!

...thanks guys!

pitt · 03-11-2009, 07:54 PM

mines the stock one and i have headers... workes fine as long as you use short valve covers...i put tall ones on my engine and the bracket didnt like it much

pumpgas · 03-12-2009, 06:15 AM

Here is a nice shot of what I used to have on my truck. Stock lower and slightly modded upper (took 2 and made 1).

GKsport67 · 03-13-2009, 12:03 AM

Quote:

Originally Posted by sneakysnake

With headers I think you have to use a bracket like this.
http://hotrodchrome.com/alternatorbrackets.html

The bottom part of this style bracket is broke,so i have to fix it. The top bracket wiggles when i rev the healthy cammed 283. im not driving it this weekend.

THANKS FOR ALL THE INFO GUYZ!!!!

Andy4639 · 03-12-2009, 02:45 PM

That's correct. I don't know years either but good point.

alfeefish · 03-12-2009, 03:02 PM

My 67 283 is that way. Its hard to find driver side bracket for It.

03-10-2009, 09:19 PM	#1
GKsport67 Registered User Join Date: Jan 2008 Location: Atlanta,Ga Posts: 660	Alternator Bracket I have a homemade alternator bracket,can anyone tell me if i can replace with something else? ...this the only photo i have!! __________________ www.gkautospa.com Like A Rock! http://67-72chevytrucks.com/vboard/s...d.php?t=397153 Last edited by GKsport67; 03-10-2009 at 09:20 PM.

03-10-2009, 09:24 PM	#2
americanmusc1e Senior Member Join Date: Jan 2009 Location: Austin, TX Posts: 1,079	Re: Alternator Bracket from the photo it dosen't look homemade, it looks like mine __________________ -- Josh Instagram: @americanmusc1e OLD SKOOL-- 1970 C10. 454/Th400/3.07 posi Build Thread FARM TRUCK----1949 Chevrolet 3800 Power Wagon Hauler Build Thread 1999 4wd OBS Tahoe - daily. DM me if you can't see photos i posted

03-10-2009, 09:34 PM	#3
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Alternator Bracket dont think thats homade..i want 1 like that thoo it nice __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

03-10-2009, 09:40 PM	#4
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Alternator Bracket That is the correct brace, why do you want another one? __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-10-2009, 09:45 PM	#6
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Alternator Bracket who me, cause mines not like that..its real big and on the other side....id post a pic but im too lazy lol im goin to bed fellas __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

03-10-2009, 09:57 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Alternator Bracket that's possibly an aftermarket chromed one? The stock one which looks like that (minus the chrome) should work fine.

03-10-2009, 10:01 PM	#8
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Alternator Bracket Yeper's the chrome ones don't hold up to well. Can you take it off and go by a machine shop and have one made. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-10-2009, 10:07 PM	#9
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Alternator Bracket I have one available here (2nd pic down) if you are interested!... http://67-72chevytrucks.com/vboard/s...d.php?t=296740 __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present Last edited by gcburdic; 03-10-2009 at 10:07 PM.

03-10-2009, 10:32 PM	#10
pumpgas Registered User Join Date: Dec 2008 Location: indiana Posts: 304	Re: Alternator Bracket To be honest with you the alt bracket is one of the last things in that engine compartment I would be worried about. Fuel pump mounted to the heater box unless the tank is in the wiper cowl isn't installed anywhere near the correct location (electric pumps are supposed to be lower then the tank) let alone the heat from the headers soaking into it. I would also look into the oil dip stick as it looks like it used to have a bolt going to a manifold bolt that would be incorrect for a small block and give incorrect readings. But as far as the alt bracket goes that other then chrome is correct and in the correct location. What brand of alt are you getting? Also as for the belt slipping I would say that is a pulley alinement issue. __________________ 00' Z28 ("wifes" car) 92' Mustang w/sbc everything needs a little heart beat 87' GMC Sierra Classic Short Bed Fleet side almost stock 69' Chevy short step carbed 6.0 w/400th trans. Completed w/325 miles on it Last edited by pumpgas; 03-10-2009 at 10:34 PM.

03-11-2009, 06:13 AM	#13
pumpgas Registered User Join Date: Dec 2008 Location: indiana Posts: 304	Re: Alternator Bracket Here is a quick pic of what it is supposed to look like. __________________ 00' Z28 ("wifes" car) 92' Mustang w/sbc everything needs a little heart beat 87' GMC Sierra Classic Short Bed Fleet side almost stock 69' Chevy short step carbed 6.0 w/400th trans. Completed w/325 miles on it

03-11-2009, 12:32 AM	#14
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Alternator Bracket Man...you got a good eye. It's weird how so many people can look at a picture and see nothing. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-11-2009, 01:31 AM	#15
GKsport67 Registered User Join Date: Jan 2008 Location: Atlanta,Ga Posts: 660	Re: Alternator Bracket I actually was refering to the bottom bracket,not the chrome one on top! sorry guys __________________ www.gkautospa.com Like A Rock! http://67-72chevytrucks.com/vboard/s...d.php?t=397153

03-11-2009, 01:46 AM	#16
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Alternator Bracket Know wonder I didn't see all that other stuff then, I can't even see the buttom bracket!! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-11-2009, 08:31 AM	#17
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Alternator Bracket not sure if you looked at what I have, but the pic 'pumpgas' posted is what I have available...sorry for any confusion! __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

03-11-2009, 11:29 AM	#18
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Re: Alternator Bracket With headers I think you have to use a bracket like this. http://hotrodchrome.com/alternatorbrackets.html Attached Images



Register or Log In To remove these advertisements.

03-11-2009, 07:54 PM	#20
pitt 69 GMC of DOOM Join Date: Aug 2007 Location: herington, KS Posts: 62	Re: Alternator Bracket mines the stock one and i have headers... workes fine as long as you use short valve covers...i put tall ones on my engine and the bracket didnt like it much Attached Images

03-12-2009, 06:15 AM	#21
pumpgas Registered User Join Date: Dec 2008 Location: indiana Posts: 304	Re: Alternator Bracket Here is a nice shot of what I used to have on my truck. Stock lower and slightly modded upper (took 2 and made 1). __________________ 00' Z28 ("wifes" car) 92' Mustang w/sbc everything needs a little heart beat 87' GMC Sierra Classic Short Bed Fleet side almost stock 69' Chevy short step carbed 6.0 w/400th trans. Completed w/325 miles on it Last edited by pumpgas; 03-12-2009 at 06:16 AM.

03-12-2009, 02:45 PM	#23
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Alternator Bracket That's correct. I don't know years either but good point. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-12-2009, 03:02 PM	#24
alfeefish Registered User Join Date: Feb 2005 Location: Harrison TN Posts: 183	Re: Alternator Bracket My 67 283 is that way. Its hard to find driver side bracket for It.

Register or Log In To remove these advertisements.