can anyone Id this? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

xshadow · 09-17-2007, 09:13 PM

I got this out of a 72 c/10 I'm pretty sure that it is a truck tilt. the glovebox was hard to read but i'm almost sure I could make out the word tilt.

Is this a truck or van tilt? anyone have pictures of a van tilt? If this is a truck tilt it's the first i've seen so I don't know.

the white speck on the shaft is NOT a hole driled out. The shaft is dirty and I don't know what the white speck is.

1969k10stepside · 09-17-2007, 09:15 PM

Looks like a truck tilt to me..

jorgensensc · 09-17-2007, 09:19 PM

The white spec is the colapsable column shaft, If I'm not mistaken.

xshadow · 09-17-2007, 09:21 PM

the nuetral saftey switch is broken are they hard to find. where can I buy one? It seemed to work great until I put it back on then It made a noise. I took it back off and the plastic housing cracked/broke...(Ooops)...If this is a truck tilt I would like to put some new parts in it. Is the lmc backup light page 121 #35 the same thing? well...... This is a little off topic....SO WHAT DO YOU THINK TRUCK OR VAN?

xshadow · 09-17-2007, 09:25 PM

thanks guys!!!!!!! I was 100% certain when I got it until I started looking at the wires. it has a straight plug and then the half circle.
I was looking at the lmc catalog and see a signal switch for a 71-72 chevy truck that has a straight plug with adaptor. maybe the switch was replaced? or is this stock?

Sorry this is my first and I have so many questions

09-17-2007, 09:13 PM	#1
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	can anyone Id this? I got this out of a 72 c/10 I'm pretty sure that it is a truck tilt. the glovebox was hard to read but i'm almost sure I could make out the word tilt. Is this a truck or van tilt? anyone have pictures of a van tilt? If this is a truck tilt it's the first i've seen so I don't know. the white speck on the shaft is NOT a hole driled out. The shaft is dirty and I don't know what the white speck is.

09-17-2007, 09:15 PM	#2
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: can anyone Id this? Looks like a truck tilt to me..

09-17-2007, 09:21 PM	#4
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	Re: can anyone Id this? the nuetral saftey switch is broken are they hard to find. where can I buy one? It seemed to work great until I put it back on then It made a noise. I took it back off and the plastic housing cracked/broke...(Ooops)...If this is a truck tilt I would like to put some new parts in it. Is the lmc backup light page 121 #35 the same thing? well...... This is a little off topic....SO WHAT DO YOU THINK TRUCK OR VAN? Last edited by xshadow; 09-17-2007 at 09:28 PM.

09-17-2007, 09:25 PM	#5
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	Re: can anyone Id this? thanks guys!!!!!!! I was 100% certain when I got it until I started looking at the wires. it has a straight plug and then the half circle. I was looking at the lmc catalog and see a signal switch for a 71-72 chevy truck that has a straight plug with adaptor. maybe the switch was replaced? or is this stock? Sorry this is my first and I have so many questions Last edited by xshadow; 09-17-2007 at 09:27 PM.

09-17-2007, 09:19 PM	#3
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: can anyone Id this? The white spec is the colapsable column shaft, If I'm not mistaken. __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.