![]() |
|
![]() |
#1 |
Registered User
Join Date: Mar 2004
Location: Virginia beach, Va
Posts: 209
|
rear ends
o.k. I did a search for rear disc brakes read every single post, and no one had seemed to of answered or thought of this question. how long of a rear end is needed for our trucks? I have a 71 c20. found an explorer 8.8 rear end on ebay, this is with disc brakes for 400 plus 100 for shipping. this is the link:
http://cgi.ebay.com/ebaymotors/ws/eB...473855618&rd=1 anyone know if this would fit? and also what size of rear end should I be looking for?
__________________
~Christopher L. Orr 71 c20, 454- Stolen While Deployed. dynoed at 550 ft lbs, 425 hp at 3000 rpm (mustang dyno). TH400 3500 stall.... etc, etc. |
![]() |
![]() |
![]() |
#2 |
Account Suspended
Join Date: Mar 2001
Location: Virginia Beach, Va. U.S.A.
Posts: 15,320
|
If you can find a 79 Lincoln Versailles you'll get a nice Ford 9 inch rear with disk brakes, slightly narrower than a truck rear (will make your truck look tubbed with the correct wheel offset and width)
![]() ![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2004
Location: Virginia beach, Va
Posts: 209
|
what up dude? your always either the only one to reply to my posts or the first one. I thought about the post after wards, and was like I am retard, why dont I just go freakin measure the rear that randy gave me? duuuhhhrrrr....
__________________
~Christopher L. Orr 71 c20, 454- Stolen While Deployed. dynoed at 550 ft lbs, 425 hp at 3000 rpm (mustang dyno). TH400 3500 stall.... etc, etc. |
![]() |
![]() |
![]() |
#4 | |
Account Suspended
Join Date: Mar 2001
Location: Virginia Beach, Va. U.S.A.
Posts: 15,320
|
LOL, it's pure coincidence I log on right around the time that you have a question.
![]() Quote:
|
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Mar 2004
Location: Virginia beach, Va
Posts: 209
|
found answer
alright, just for future refrence for fellow truck lovers, the 71 and newer 2wd rear ends had a measurment of 62". that was according to this website:
http://50chevy.freeservers.com/Suspension_Widths.html I hope that in the future this can help others. the site also gives out demensions of other vehicle rear ends
__________________
~Christopher L. Orr 71 c20, 454- Stolen While Deployed. dynoed at 550 ft lbs, 425 hp at 3000 rpm (mustang dyno). TH400 3500 stall.... etc, etc. |
![]() |
![]() |
![]() |
Bookmarks |
|
|