Load of parts bound for Pennsylvania - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hotrodhenryj · 05-04-2004, 12:50 PM

I have a load of parts going to Meadville, PA in the next few weeks and have room for a cab. I have one that I was going to use on my SB project but have since found a Cheyenne cab. This cab is rust free and came from a BB truck. No speaker holes in the doors but the dash is cut for CD player. Damage to drivers rocker and lower part of door. Cab is an AC, high hump and is complete with all glass, PS, AC and steering colulmn. Price is 800, or 700 without any accessories. This can be picked up at Burnmans place in PA. Shipping would be around 250-350. I also have a nice straight set of rust free doors for 300pr. Rust free SB side that has some dents that could be pushed out from the inside for 300. This load of parts will have rad supports, fenders, doors, tailgates, bed and another cab. If interested I can send all the pics of the parts you may be needing. There is a time frame of approx. 3 weeks so that should give enough time to inquire. All parts are to be paid for before transport and shipping paid when picked up. Let me know what your needing and maybe can find room on this load for you. Thanks, Chuck

Hotrodhenryj · 05-04-2004, 12:55 PM

I power brushed the complete underside of this cab with a wire wheel to get to the bare metal. No rust, now is under coated. Chrome vent windows, tinted glass, floors are mint, email for detailed pics.

chiphayes · 05-04-2004, 07:06 PM

bed?long or short?price?

67ChevyC10Stepside · 05-04-2004, 01:33 PM

i need a cab but dont wanna spend that much

Hotrodhenryj · 05-04-2004, 01:50 PM

How much do you want to pay?, as I sent one there on the last load and he still has it.

Burnsman · 05-04-2004, 02:19 PM

Like Chuck said, there are parts coming back and I have a big pile of stuff now. Way too much to list. Hey Chuck, you have any bikini clad women out there (since it's so hot). I haven't seen one of those in awhile in this part of the country......................

70c10 · 05-04-2004, 02:31 PM

How far is Meadville from Baltimore?

Burnsman · 05-04-2004, 02:55 PM

I'm not real sure. It's been a while since I was in Baltimore. Off the top of my head, I'm going to say 5-6 hours, but I'm not 100% sure.

70c10 · 05-04-2004, 03:04 PM

Burnsman, You are correct. I just checked mapquest. My dad needs a pair of doors, unfortunately, I was hoping you were within 2 hours drive time.

Burnsman · 05-04-2004, 03:20 PM

I guess it just depends how fast you drive......

busterwivell · 05-04-2004, 05:00 PM

Too hot for bikinis in AZ now.

hughnews1 · 05-04-2004, 05:44 PM

can you throw a 71 fleet tailgate on the truck ? lmk hugh

Hotrodhenryj · 05-04-2004, 08:14 PM

Hugh, I resent pics of tailgate, I can throw it in.

Chip, Its a longbed from a 71 GMC, steel floor. If this is what you want let me know and will get price.

chiphayes · 05-04-2004, 09:18 PM

Quote:

Originally Posted by Hotrodhenryj

Hugh, I resent pics of tailgate, I can throw it in.

Chip, Its a longbed from a 71 GMC, steel floor. If this is what you want let me know and will get price.

yes,longbed,and its even gmc.price and pics?i bet on the way to penn.you drive within a few miles of my house.maybe you can stop and i can get it.let me know , i am going to look at one this weekend,and the guy is a little high on the price,its decent, but not worth what hes wanting and hes not negotiable,but i am tired of the wild goose chases. thanks

Litdave · 05-04-2004, 10:28 PM

Hotrodhenryj,

I am interested in your cab. What year is it?

Also, how close will you come to Nashville, TN on your way to PA?

Thanks, Litdave

teeitup · 05-04-2004, 10:34 PM

Chuck, I got some more room, we just bought some land for storage of all my other well used merchandise.

hughnews1 · 05-04-2004, 08:17 PM

yup the green one .. going to burns man huh nice

teeitup · 05-04-2004, 08:22 PM

Hey Chuck when you going to bring a load up to me?

Hotrodhenryj · 05-04-2004, 09:00 PM

Hugh, The green one is yours

Randy, Right, where would you put it?

Forgot to mention that I also have a nice 67-8 grill for 125, 70 GMC grill for 100. and Longhorn bed for 400.

Leaving for my vacation and need gas money for my motorhome!! 1350 miles at 7mpg...X two bucks a gallon.........OUCH

Burnsman · 05-04-2004, 09:13 PM

Too hot for bikinis? That only means one thing......throw a few of the bikini-less women in...................

Hotrodhenryj · 05-04-2004, 11:47 PM

Dave, Cab is a 71. I will not be delivering any of the parts. Burnsman has contracted a trucking company that will be picking up the loaded trucks here. Not sure if he will stop to offload any parts. If your still interested I could find out for you.

Randy, I will start a load for you if you really want it........

bstack · 05-05-2004, 06:12 PM

Hotrod, what do you have in the way of
a fleetside tailgate?
Thanks Bruce

Hotrodhenryj · 05-05-2004, 07:12 PM

bstack: I have one nice one left that is in this load. PM me your email if you want a few pics.

chiphayes: I PM'ed you need your email also to send pics of bed.

Litdave · 05-06-2004, 08:42 AM

Hotrodhenryj,

Could you email me some better pics of the cab including any damaged or rusted areas?

Thanks, Dave

9footfan · 05-08-2004, 01:13 AM

hotrodhenryj--looking for undamaged set of bed to frame mounting brackets for lwb. there are 6 total--4 "c" brackets and 2 flatter brackets that kinda look like wings. also need c-30 9ft stepside pickup bedsides, stepboard reenforcement brackets(4), and 67-68 c-30 parking brake assembly complete. thanks for your time.

05-04-2004, 12:50 PM	#1
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Load of parts bound for Pennsylvania I have a load of parts going to Meadville, PA in the next few weeks and have room for a cab. I have one that I was going to use on my SB project but have since found a Cheyenne cab. This cab is rust free and came from a BB truck. No speaker holes in the doors but the dash is cut for CD player. Damage to drivers rocker and lower part of door. Cab is an AC, high hump and is complete with all glass, PS, AC and steering colulmn. Price is 800, or 700 without any accessories. This can be picked up at Burnmans place in PA. Shipping would be around 250-350. I also have a nice straight set of rust free doors for 300pr. Rust free SB side that has some dents that could be pushed out from the inside for 300. This load of parts will have rad supports, fenders, doors, tailgates, bed and another cab. If interested I can send all the pics of the parts you may be needing. There is a time frame of approx. 3 weeks so that should give enough time to inquire. All parts are to be paid for before transport and shipping paid when picked up. Let me know what your needing and maybe can find room on this load for you. Thanks, Chuck __________________ Arizona rust free sheetmetal

05-04-2004, 12:55 PM	#2
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	I power brushed the complete underside of this cab with a wire wheel to get to the bare metal. No rust, now is under coated. Chrome vent windows, tinted glass, floors are mint, email for detailed pics. Attached Images __________________ Arizona rust free sheetmetal Last edited by Hotrodhenryj; 05-04-2004 at 12:58 PM.

05-04-2004, 01:33 PM	#4
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	i need a cab but dont wanna spend that much __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

05-04-2004, 01:50 PM	#5
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	How much do you want to pay?, as I sent one there on the last load and he still has it. __________________ Arizona rust free sheetmetal

05-04-2004, 02:19 PM	#6
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Parts Like Chuck said, there are parts coming back and I have a big pile of stuff now. Way too much to list. Hey Chuck, you have any bikini clad women out there (since it's so hot). I haven't seen one of those in awhile in this part of the country...................... __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

05-04-2004, 07:06 PM	#3
chiphayes Registered User Join Date: Jan 2003 Location: indiana Posts: 186	bed?long or short?price?

05-04-2004, 02:31 PM	#7
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	How far is Meadville from Baltimore? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

05-04-2004, 02:55 PM	#8
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Distance I'm not real sure. It's been a while since I was in Baltimore. Off the top of my head, I'm going to say 5-6 hours, but I'm not 100% sure. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

05-04-2004, 03:04 PM	#9
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Burnsman, You are correct. I just checked mapquest. My dad needs a pair of doors, unfortunately, I was hoping you were within 2 hours drive time. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

05-04-2004, 03:20 PM	#10
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Baltimore I guess it just depends how fast you drive...... __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

05-04-2004, 05:00 PM	#11
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	Too hot for bikinis in AZ now. __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

05-04-2004, 05:44 PM	#12
hughnews1 Registered User Join Date: Apr 2002 Location: Hudson FL gulf coast Posts: 624	can you throw a 71 fleet tailgate on the truck ? lmk hugh

05-04-2004, 08:14 PM	#13
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Hugh, I resent pics of tailgate, I can throw it in. Chip, Its a longbed from a 71 GMC, steel floor. If this is what you want let me know and will get price. __________________ Arizona rust free sheetmetal

05-04-2004, 10:28 PM	#15
Litdave Registered User Join Date: Feb 2002 Location: Tullahoma, TN Posts: 202	Cab Hotrodhenryj, I am interested in your cab. What year is it? Also, how close will you come to Nashville, TN on your way to PA? Thanks, Litdave __________________ 71 Factory SWB 4x4 Project 383/350/205 69 LWB 2wd CST Daily Driver ZZ4/700r4/3.73 72 SWB Future Hot Rod

05-04-2004, 10:34 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Chuck, I got some more room, we just bought some land for storage of all my other well used merchandise. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

05-04-2004, 08:17 PM	#17
hughnews1 Registered User Join Date: Apr 2002 Location: Hudson FL gulf coast Posts: 624	yup the green one .. going to burns man huh nice

05-04-2004, 08:22 PM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Hey Chuck when you going to bring a load up to me? __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-04-2004, 09:00 PM	#19
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Hugh, The green one is yours Randy, Right, where would you put it? Forgot to mention that I also have a nice 67-8 grill for 125, 70 GMC grill for 100. and Longhorn bed for 400. Leaving for my vacation and need gas money for my motorhome!! 1350 miles at 7mpg...X two bucks a gallon.........OUCH __________________ Arizona rust free sheetmetal

05-04-2004, 09:13 PM	#20
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Parts Too hot for bikinis? That only means one thing......throw a few of the bikini-less women in................... __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

05-04-2004, 11:47 PM	#21
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Dave, Cab is a 71. I will not be delivering any of the parts. Burnsman has contracted a trucking company that will be picking up the loaded trucks here. Not sure if he will stop to offload any parts. If your still interested I could find out for you. Randy, I will start a load for you if you really want it........ __________________ Arizona rust free sheetmetal

05-05-2004, 06:12 PM	#22
bstack Registered User Join Date: Dec 2000 Location: cambridge,ohio Posts: 135	Hotrod, what do you have in the way of a fleetside tailgate? Thanks Bruce __________________ 70-Olds 442 66-Impala 4-dr. 67-K-10 87 Chev. 1/2 Ton 4x4 Swb

05-05-2004, 07:12 PM	#23
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	bstack: I have one nice one left that is in this load. PM me your email if you want a few pics. chiphayes: I PM'ed you need your email also to send pics of bed. __________________ Arizona rust free sheetmetal

05-06-2004, 08:42 AM	#24
Litdave Registered User Join Date: Feb 2002 Location: Tullahoma, TN Posts: 202	Cab Hotrodhenryj, Could you email me some better pics of the cab including any damaged or rusted areas? Thanks, Dave __________________ 71 Factory SWB 4x4 Project 383/350/205 69 LWB 2wd CST Daily Driver ZZ4/700r4/3.73 72 SWB Future Hot Rod

05-08-2004, 01:13 AM	#25
9footfan get up! stand up! Join Date: Apr 2004 Location: austin,tx Posts: 345	hotrodhenryj--looking for undamaged set of bed to frame mounting brackets for lwb. there are 6 total--4 "c" brackets and 2 flatter brackets that kinda look like wings. also need c-30 9ft stepside pickup bedsides, stepboard reenforcement brackets(4), and 67-68 c-30 parking brake assembly complete. thanks for your time.

Register or Log In To remove these advertisements.