WTB: Complete 3.08 rear end, 5 or 6 lug

[glock35ipsc]

Looking for a complete 5 or 6 lug rearend geared in 3.08. Leaf or coils, doesn't really matter, but prefer coils to ease installation. Also, it doesn't matter if it is 5 or 6 lug (prefer 5 lug though). And it can be a one-legger or a posi.

I need it basically complete drum to drum if it is 5 lug. If it is 6 lug, I will re-use my backing plate and drums from my current rear end.

I would prefer it to be within a reasonable driving distance from Northern Colorado (Ft. Collins area), but I get a real good discount with FedEx Freight, so if you are willing to band it on a pallet and be able to load it in a semi trailer, that may not be totally out of the question.

Please either post here what you have along with a price, or send me a PM.

Thanks!!!!!!!!! Bob

[smonty]

I have a complete 3.08 gearset, carrier, spyders and spacers if you could use them. Was going to use them on another project that has been sold.

Ernie

[glock35ipsc]

Let me know what you want for them. I may go that route if I can't come up with another rear end.

My plan was to run a 3.08 rear when I put in the TH350, then put the 3.73 back in when the TH700R4 is done.

[stllookn]

Good 3.08 one legger off a '67 that is going to the recycler. Pay the frieght for the rearend and your blue seat coming this way and we are even!

[chevyhouse]

if his falls through, i have one....6 lug coil from a 69, pay the shipping from hettinger nd and its yours

[smonty]

I will take $25.00 plus shipping for the set. Just let me know.

Ernie

[TRUCKPOOR]

I have a 72 coil spring non-posi 1/2 ton rear in Littleton. I need to get it gone. Please give me a call @ 303-973-6713. Not sure of the ratio but I can check if you want. Thanks,Robert

[glock35ipsc]

Thanks everyone! I got one locally from TRUCKPOOR, picking it up this weekend.