|
05-10-2004, 10:51 PM | #1 |
Registered User
Join Date: Mar 2004
Location: Hoytsville, Utah
Posts: 3,365
|
Got my '68 panel home
Thank you, '68 Suburban, for being an honest, straight-up guy to deal with.
I had tow vehicle trouble on the way home from Pheonix, so I had to drive the panel the last 250 miles or so. It ran and drove great. I forgot how cool the three-on-the-tree was. It got 20 mpg over 250 miles of back road Utah. That little straight six keeps it up with traffic OK. I have a couple questions today. I pulled one of the front wheels off to see how the brakes looked, and there were three 5/16 bolts that held the drum to the hub. I don't think I've ever seen this before. I undid the first one, thinking it was threaded into the hub, but then I heard the nut fall off inside the drum. I undo the other two, and same thing. I get the drum off, and I see a brake job in my near future. I decide to put everything back the way it was when I notice that there is no way (to my untrained eye) to hold those nuts in place while putting the drum back on. Could this all have been put together and installed as a unit? I don't see how. I'll take pictures of the other side when I take it apart. The other thing is- The ignition switch does not seem to have an 'ACC' position. It all seems original, but if there was no radio, would they have put in a key switch like this? |
05-11-2004, 12:36 AM | #2 |
Registered User
Join Date: Feb 2003
Location: The Rubber City
Posts: 5,498
|
its been a while since i've driven my truck, but I remember the Acc. position being a slight turn to the left, instead of right.
Sorry I'm not much of a help...but, that sure is a nice panel! i hope you enjoy it.
__________________
1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650 |
05-11-2004, 12:57 AM | #3 |
Recovering 67-72 Addict
Join Date: Oct 2000
Location: North Bend, WA
Posts: 1,788
|
My 68 doesn't have an accessory position either. I think that this is normal for 68.
__________________
68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women" |
05-11-2004, 04:00 AM | #4 |
English Chevy Owner
Join Date: May 2002
Location: Shropshire, UK/ Lot, France
Posts: 1,848
|
My front hubs are still rivetted to the hub as they cam from the factory so you have to pull the drum and hub as one unit, it's a right PITA. Sounds like someone substituted bolts for the rivets maybe when the replaced the drums at some point. I believe that you dont actually need them as the wheel holds the drum on anyway. Next time mine are off the grinder is coming out to decapitate the rivets.
__________________
Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission |
05-11-2004, 01:49 PM | #5 |
Registered User
Join Date: Oct 2000
Location: From Chicago, Live in Phoenix, AZ
Posts: 6,802
|
Im glad that panel was up for the task. It is good that you got home safe
__________________
Just sitting here contemplating contemplation. |
05-11-2004, 03:34 PM | #6 |
Registered User
Join Date: Feb 2002
Location: Vacaville, CA
Posts: 2,746
|
What Lippyp said. They came from the factory rivited together, you had to pull hub to get drums of to do brakes. There is no real need for them to be attached just put the Nuts and bolts in your circular used parts bin.
__________________
70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI |
05-11-2004, 09:29 PM | #7 | |
Registered User
Join Date: Mar 2004
Location: Hoytsville, Utah
Posts: 3,365
|
Quote:
|
|
Bookmarks |
|
|