Got it out of the garage today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bowtie67 · 05-14-2004, 04:32 PM

Well I finally got it to the point of getting it out of the garage and take it for a little spin and even got it inspected to boot. I still am having some little issues like one of the head gaskets is seeping a minute oil in the rear on the passanger side, Rack & pinion leaks and is jerky and sometimes it stiffens right up but wow talk about instant turning compared to the stock setup, I have a small trans line leak and fine tune the fuel injection setup. I just got off the phone with the people who I got the frontend components from to also make me a new set of upper and lower control arms to raise the front end up an inch because htis wasn't were it was originally supposed to set. Here is a picture with the new Cowl Hood that I won't be able get painted for a while because my body shop guy is a little busy at the moment and I don't do body work. Work done this winter, New Engine (414SBC), new IFS frontend w/ rack & Pinion and Disk Brakes, 4link rear suspension w/CoilOvers, 4.10 gears, all new wiring, switched over from 6lug to 5lug and Power Disk brakes (that took some getting used to, I bet I came close to kissing the windsheild 3 times, Javy's Dash & Glove Box with all new AutoMeter Guages from a Dakaota Digital Dash setup and New Holley StealthRam Fuel Injection, What do you think?

skokie · 05-14-2004, 04:34 PM

Looking good but NEED MORE PICS

dubie · 05-14-2004, 04:34 PM

NICE!!!! you really put a ton of work into that ride over the winter. Looking great!!!

**Yukon Jack** · 05-14-2004, 04:35 PM

Looking awesome!

Custom 68 · 05-14-2004, 04:37 PM

That is verrrrry niceeee. Woops sorrrrrry my keeeeyboard stickkkkks with the drooool.
yea lets see more pictures...
Dave

Bowtie67 · 05-14-2004, 05:10 PM

Oh I forgot the new 3pt Seat belts, Covert my old hitch to a hidden hitch, added front kick panel speakers and duel speaker setup in the factory dash location. I have the tailgate, just havent put it on yet

Bowtie67 · 05-14-2004, 05:13 PM

COuple more pics

IVANtheTERRIBLE · 07-10-2004, 01:41 PM

All the effort you put into your truck payed off. I hope mine will look as good..

Bowtie67 · 07-10-2004, 03:05 PM

Thanks for the compliments guys, I just got back from the alignment shop after replacing upper and lower control arms to raise the frontend up a couple of inches that it should have been to begin with and also to have the rear diff aligned from the 4 link suspension. I had to put a set of stock wheels on the rear with some snow tires for the alignment machine. This truck has to have wide tires, almost everytime i would get into it the truck would go sideways.

MikeOJ: I dont remember where I got those seat belts from but was easy install, I think GMC Pauls has a complete setup including middle seat belt for resonable money.

67Chev, I'm not sure or remember the exact price on the dash setup inpart because it was part of the deal with the Glove box, If you went to his sight there is a phone number to call and just speak to Javy, Pretty descent guy and I am quite happy with the dash. He can give you what ever his current prices are. Oh and mention to him you saw a pick of my truck and the info was there to call him. Dash does not come with guages..

**'70_402** · 05-14-2004, 05:25 PM

That is a sweeeet truck!!!!!!!!!!!!!! Man that dash is sweet!! that is the next thing i am buying for my truck!!

DID I MENTION THAT IS A SWEEET TRUCK!??

Rick

BtnkBndt · 05-14-2004, 05:44 PM

WOW!! I like the stance myself, looks tough like that.

**Canadian694x4** · 05-14-2004, 05:52 PM

WICKED WICKED RIDE!!! She Looks Great!!!

Bowtie67 · 05-14-2004, 06:02 PM

Thank Guys, The Encouragement is nice, A lot of heart ache went into this. By the looks of my rugs in one of the shoots I better find my Rubber mats and put them back in. It hell living in the contry. A half hour after washing the bikes and getting all the grinding and sitting dust off the truck it was covered with pollen.

MMGOODIE · 05-14-2004, 06:27 PM

Yuck...that interior looks horrible. You really need to get rid of that nasty gauge cluster and that tilt column.

Btw way if you PM me I can give you the address for the garbage can you can throw them away in.

very nice job. I have never really been in to the rake but that truck totally pulls it off in style.

**Palf70Step** · 05-14-2004, 07:39 PM

Very nice. Hope mine looks half that good someday.

**1970 CST Short Wide** · 05-14-2004, 08:54 PM

I want your wheels , Very nice

68w/sbc406 · 05-14-2004, 09:15 PM

i am going to have dreams about your truck tonight. is that a dash kit or did you make it?

Bowtie67 · 05-15-2004, 09:07 AM

Quote:

Originally Posted by 68w/sbc406

i am going to have dreams about your truck tonight. is that a dash kit or did you make it?

The Dash and Glove Box Are from JJengineering in Ca, He has some post here and uses the name - Javy - The guages do not come with it, they are all AutoMeter guages. They are made out of Billet Aluminum.

http://www.jjengineering.us/products/products.htm

Warbones: The seat cover and door Panels I beleive I got them from LMC, it was about 6-7 years ago when I first got the truck.

dion · 05-14-2004, 09:22 PM

Bad Ass!!!!

Bill72BB · 05-14-2004, 09:57 PM

That looks Awsome ,I like the new hood ,you did great ,Lets go cruising.

*Randy70C-10* · 05-14-2004, 10:02 PM

Very nice!!!!

Warbones · 05-15-2004, 01:23 AM

Can I get more info on the seat and door panels? Looks sweet! Did you do the seat and panels yourself?

**FRENCHBLUE72** · 05-15-2004, 09:47 AM

B!tchin looking ride nice work!!!

boraxman · 05-15-2004, 10:01 AM

Love it!!!!!!!!

67shortie · 05-15-2004, 11:01 AM

Nice truck bowtie, what backspacing are on those rear rims?

Again, your hard work shows

05-14-2004, 04:32 PM	#1
Bowtie67 Registered User Join Date: Jan 2004 Location: NH Posts: 2,266	Got it out of the garage today Well I finally got it to the point of getting it out of the garage and take it for a little spin and even got it inspected to boot. I still am having some little issues like one of the head gaskets is seeping a minute oil in the rear on the passanger side, Rack & pinion leaks and is jerky and sometimes it stiffens right up but wow talk about instant turning compared to the stock setup, I have a small trans line leak and fine tune the fuel injection setup. I just got off the phone with the people who I got the frontend components from to also make me a new set of upper and lower control arms to raise the front end up an inch because htis wasn't were it was originally supposed to set. Here is a picture with the new Cowl Hood that I won't be able get painted for a while because my body shop guy is a little busy at the moment and I don't do body work. Work done this winter, New Engine (414SBC), new IFS frontend w/ rack & Pinion and Disk Brakes, 4link rear suspension w/CoilOvers, 4.10 gears, all new wiring, switched over from 6lug to 5lug and Power Disk brakes (that took some getting used to, I bet I came close to kissing the windsheild 3 times, Javy's Dash & Glove Box with all new AutoMeter Guages from a Dakaota Digital Dash setup and New Holley StealthRam Fuel Injection, What do you think? Attached Images __________________ 1967 C10 - SWBSS Pro Street 427sbc, 700R4 & 4.10 Gears 1948 Chevy FleetMaster Coupe, LS1, (almost done) 1950 Chevy StyleLine Coupe 250/6 3x2 Dueces 2009 Toyota Tundra 1996 Harley RoadKing "I maybe getting old, but I can still burn rubber with the best of them"

05-14-2004, 04:34 PM	#3
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	NICE!!!! you really put a ton of work into that ride over the winter. Looking great!!! __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

05-14-2004, 04:35 PM	#4
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Looking awesome! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

05-14-2004, 04:37 PM	#5
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,929	That is verrrrry niceeee. Woops sorrrrrry my keeeeyboard stickkkkks with the drooool. yea lets see more pictures... Dave __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

05-14-2004, 05:10 PM	#6
Bowtie67 Registered User Join Date: Jan 2004 Location: NH Posts: 2,266	Oh I forgot the new 3pt Seat belts, Covert my old hitch to a hidden hitch, added front kick panel speakers and duel speaker setup in the factory dash location. I have the tailgate, just havent put it on yet Attached Images __________________ 1967 C10 - SWBSS Pro Street 427sbc, 700R4 & 4.10 Gears 1948 Chevy FleetMaster Coupe, LS1, (almost done) 1950 Chevy StyleLine Coupe 250/6 3x2 Dueces 2009 Toyota Tundra 1996 Harley RoadKing "I maybe getting old, but I can still burn rubber with the best of them" Last edited by Bowtie67; 05-14-2004 at 05:14 PM.

05-14-2004, 04:34 PM	#2
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,334	Looking good but NEED MORE PICS

05-14-2004, 05:13 PM	#7
Bowtie67 Registered User Join Date: Jan 2004 Location: NH Posts: 2,266	COuple more pics Attached Images __________________ 1967 C10 - SWBSS Pro Street 427sbc, 700R4 & 4.10 Gears 1948 Chevy FleetMaster Coupe, LS1, (almost done) 1950 Chevy StyleLine Coupe 250/6 3x2 Dueces 2009 Toyota Tundra 1996 Harley RoadKing "I maybe getting old, but I can still burn rubber with the best of them"

07-10-2004, 01:41 PM	#8
IVANtheTERRIBLE Registered User Join Date: Jul 2004 Location: Northern California Posts: 3	All the effort you put into your truck payed off. I hope mine will look as good..

07-10-2004, 03:05 PM	#9
Bowtie67 Registered User Join Date: Jan 2004 Location: NH Posts: 2,266	Thanks for the compliments guys, I just got back from the alignment shop after replacing upper and lower control arms to raise the frontend up a couple of inches that it should have been to begin with and also to have the rear diff aligned from the 4 link suspension. I had to put a set of stock wheels on the rear with some snow tires for the alignment machine. This truck has to have wide tires, almost everytime i would get into it the truck would go sideways. MikeOJ: I dont remember where I got those seat belts from but was easy install, I think GMC Pauls has a complete setup including middle seat belt for resonable money. 67Chev, I'm not sure or remember the exact price on the dash setup inpart because it was part of the deal with the Glove box, If you went to his sight there is a phone number to call and just speak to Javy, Pretty descent guy and I am quite happy with the dash. He can give you what ever his current prices are. Oh and mention to him you saw a pick of my truck and the info was there to call him. Dash does not come with guages.. __________________ 1967 C10 - SWBSS Pro Street 427sbc, 700R4 & 4.10 Gears 1948 Chevy FleetMaster Coupe, LS1, (almost done) 1950 Chevy StyleLine Coupe 250/6 3x2 Dueces 2009 Toyota Tundra 1996 Harley RoadKing "I maybe getting old, but I can still burn rubber with the best of them"

05-14-2004, 05:25 PM	#10
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	That is a sweeeet truck!!!!!!!!!!!!!! Man that dash is sweet!! that is the next thing i am buying for my truck!! DID I MENTION THAT IS A SWEEET TRUCK!?? Rick __________________ https://www.ebay.com/itm/295742064443

05-14-2004, 05:44 PM	#11
BtnkBndt Pennyless Fool Join Date: Oct 2003 Location: Forney,Tx Posts: 439	WOW!! I like the stance myself, looks tough like that. __________________ "Who owns this car with the peace sign, the mag wheels, and four on the floor?" 67 Short Step 283/TH400/4.11

05-14-2004, 05:52 PM	#12
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	WICKED WICKED RIDE!!! She Looks Great!!! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

05-14-2004, 06:02 PM	#13
Bowtie67 Registered User Join Date: Jan 2004 Location: NH Posts: 2,266	Thank Guys, The Encouragement is nice, A lot of heart ache went into this. By the looks of my rugs in one of the shoots I better find my Rubber mats and put them back in. It hell living in the contry. A half hour after washing the bikes and getting all the grinding and sitting dust off the truck it was covered with pollen. __________________ 1967 C10 - SWBSS Pro Street 427sbc, 700R4 & 4.10 Gears 1948 Chevy FleetMaster Coupe, LS1, (almost done) 1950 Chevy StyleLine Coupe 250/6 3x2 Dueces 2009 Toyota Tundra 1996 Harley RoadKing "I maybe getting old, but I can still burn rubber with the best of them"

05-14-2004, 06:27 PM	#14
MMGOODIE I love doing it topless Join Date: Oct 2003 Location: MossyRock, WA Posts: 493	Yuck...that interior looks horrible. You really need to get rid of that nasty gauge cluster and that tilt column. Btw way if you PM me I can give you the address for the garbage can you can throw them away in. very nice job. I have never really been in to the rake but that truck totally pulls it off in style. __________________ Mikey "If you can read this, thank a teacher; If you are reading it in English, thank a soldier."

05-14-2004, 07:39 PM	#15
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,816	Very nice. Hope mine looks half that good someday. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

05-14-2004, 08:54 PM	#16
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,110	I want your wheels , Very nice __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

05-14-2004, 09:15 PM	#17
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	i am going to have dreams about your truck tonight. is that a dash kit or did you make it? __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

05-14-2004, 09:22 PM	#19
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	Bad Ass!!!! __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

05-14-2004, 09:57 PM	#20
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	That looks Awsome ,I like the new hood ,you did great ,Lets go cruising. __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

05-14-2004, 10:02 PM	#21
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Very nice!!!!

05-15-2004, 01:23 AM	#22
Warbones Navel Inspector Join Date: Mar 2003 Location: Wichita, Ks Posts: 1,373	Can I get more info on the seat and door panels? Looks sweet! Did you do the seat and panels yourself? __________________ 1948 Chevy Aerosedan GONE! I think. 1984 Cadillac Fleetwood Brougham Coupe WANTED 1967 IMPALA 1967 CST C10 Long Bed with a 283

05-15-2004, 09:47 AM	#23
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,602	B!tchin looking ride nice work!!! __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-15-2004, 10:01 AM	#24
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,921	Love it!!!!!!!! __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

05-15-2004, 11:01 AM	#25
67shortie Green club Join Date: May 2002 Location: Central CA Posts: 1,059	Nice truck bowtie, what backspacing are on those rear rims? Again, your hard work shows __________________ 71 short/fleet ECE 4/6 drop, LQ4/700r4/3.42 gears 70 SS396 Chevelle 427/200-4R/3.73posi 61 Lincoln Continental, black on black Son you are going to drive me to drinkin if you don't stop drivin that hot rod lincoln

Register or Log In To remove these advertisements.