WTB- Factory Jack - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 05-24-2004, 05:35 PM

Yeah, I know they are all pieces of crap, but mine doesn't work at all. Of course I didn't find this out till I needed it.

Anyway, I need a stock jack to replace the hunk-o-junk unit I currently have. Anyone have one that actually works? Maybe someone close so it doesn't cost a fortune to ship?

N2TRUX

79Silv4x4 · 05-24-2004, 07:24 PM

'77 specific or will any year work? I have a few and you are welcome to one if it will work for ya.

**crossy** · 05-24-2004, 10:34 PM

I have an NOS one for a 77.

Nah - only kidding . I don't even know what the early ones look like . Of all the 73-80's I ever parted i don't think one ever had a jack still in it .
It was GM part number 14018602 , group 8.820 ,screw type jack assembly, also 14001707 handle. See if it is still available. even have the part number for the sticker #465670 .DAVE

**N2TRUX** · 05-25-2004, 08:03 AM

79Silv4x4- I'm not sure if the one I have is correct or not. All I want is one that will fit in the stock brackets. I'll get a pic and see if mine matches any of yours...

Dave- Thanks for the numbers. I'll check GMpartsdirsct and see if it is available.

*edit* Dave I checked the numbers, and it's not available from GM

bigblock73 · 05-25-2004, 09:01 AM

I have one in my '77 Blazer. If I sell it I can always remove the jack and its components prior. I highly doubt it will affect its resale value.

87Silvy · 05-26-2004, 04:55 PM

Not to highjack your thread Ken, but I am also looking for a jack for my 87 if anyone has one lying around.

**N2TRUX** · 05-27-2004, 01:15 AM

Quote:

Originally Posted by 87Silvy

Not to highjack your thread Ken, but I am also looking for a jack for my 87 if anyone has one lying around.

Come on in, there's plenty of room here

I have been under my truck all week getting it ready for a show this weekend. I promise I'll get a pic up soon.

79Silv4x4- I'll get back with you as soon as I get the pic.

bigblock73- Jeff if the others don't work, I'll buy yours.

*1FaastC10* · 05-27-2004, 05:02 PM

i've got the one that came under the hood of my 86 C10, PM me if interested.

1974ChevyC10 · 05-27-2004, 07:26 PM

i have one handle included from a 74 or 74 you can have-i used it once and it seemed to work fine.let me know

Jonboy · 05-28-2004, 08:21 AM

Are the jacks all about the same up to 87?

Izzy · 05-28-2004, 10:29 PM

If the one on my 83 is the same you can have it. Next time you're in town you can swing by and pick it up or I can possibly have my buddy that lives in Garland take it to Stoked Out.

05-24-2004, 05:35 PM	#1
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	WTB- Factory Jack Yeah, I know they are all pieces of crap, but mine doesn't work at all. Of course I didn't find this out till I needed it. Anyway, I need a stock jack to replace the hunk-o-junk unit I currently have. Anyone have one that actually works? Maybe someone close so it doesn't cost a fortune to ship? N2TRUX

05-24-2004, 10:34 PM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	I have an NOS one for a 77. Nah - only kidding . I don't even know what the early ones look like . Of all the 73-80's I ever parted i don't think one ever had a jack still in it . It was GM part number 14018602 , group 8.820 ,screw type jack assembly, also 14001707 handle. See if it is still available. even have the part number for the sticker #465670 .DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

05-25-2004, 09:01 AM	#5
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	I have one in my '77 Blazer. If I sell it I can always remove the jack and its components prior. I highly doubt it will affect its resale value. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

05-26-2004, 04:55 PM	#6
87Silvy Registered User Join Date: Sep 2003 Location: North Texas Posts: 326	Not to highjack your thread Ken, but I am also looking for a jack for my 87 if anyone has one lying around. __________________ 1987 Chevrolet Silverado 2005 Chevrolet Silverado

05-27-2004, 07:26 PM	#9
1974ChevyC10 Overworked and Underlaid Join Date: May 2002 Location: Flagstaff,Arizona Posts: 1,279	i have one handle included from a 74 or 74 you can have-i used it once and it seemed to work fine.let me know __________________ I'd rather push a Chevy than drive a Ford The Beast-1978 C10 LWB Red-1978 C10 LWB (Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012 Gone but will never be forgotten-RIP (Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012 Taken from us to soon but you will live on in our hearts-RIP

05-24-2004, 07:24 PM	#2
79Silv4x4 Workaholic Join Date: Oct 2002 Location: Katy, TX Posts: 1,589	'77 specific or will any year work? I have a few and you are welcome to one if it will work for ya.

05-25-2004, 08:03 AM	#4
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	79Silv4x4- I'm not sure if the one I have is correct or not. All I want is one that will fit in the stock brackets. I'll get a pic and see if mine matches any of yours... Dave- Thanks for the numbers. I'll check GMpartsdirsct and see if it is available. edit Dave I checked the numbers, and it's not available from GM

05-27-2004, 05:02 PM	#8
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	i've got the one that came under the hood of my 86 C10, PM me if interested.

05-28-2004, 08:21 AM	#10
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Are the jacks all about the same up to 87? __________________ 1974 Jimmy- 5.3/4L80e/NP241

05-28-2004, 10:29 PM	#11
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	If the one on my 83 is the same you can have it. Next time you're in town you can swing by and pick it up or I can possibly have my buddy that lives in Garland take it to Stoked Out.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.