dual fan wiring diagram? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 05-28-2004, 12:41 AM

i need the diagram to hookup a fan controller to dual fans.

i also need to know of a place to buy a 30a relay. would autozone sell them?

LOHRTBT · 05-28-2004, 10:32 AM

Eric....why dont you listen to me?? damn..Go to O Reillys. Get the 2 Hayden Fans, the Hayden electronic controller, Wire them as they tell you in the directions and be done with it! Under 170 bux for all of it! With a lifetime warranty. WOrks great and looks great. Very simple

ocbaud · 05-28-2004, 10:38 AM

i already have the two freakin hayden fans fool. they are already hooked up to a on/off toggle swtich.

i just lost the instructions so i needed them posted fool

LOHRTBT · 05-28-2004, 11:25 AM

Retard...go to O reilly and ask for a copy of them, They can make you a copy of them with the Fax machine on copy mode. DUH! Friggin Tool!

gchemist · 05-29-2004, 12:51 PM

Cat Fight!!!!!

piecesparts · 05-30-2004, 10:08 PM

Het it sounds to me that you already have a dual fan control. flip the switch and they come on, flip the switch again and they go off. Life is simple, isn't it?

ocbaud · 05-30-2004, 10:51 PM

i remember seeing a couple diagrams online to wire it up. i would really love to find those again.

i found the instructions with the hayden fans, but they dont detail it very well.

ocbaud · 05-30-2004, 10:53 PM

oh yeah, how much coolant is gonna come out when i take a plug out of the head to install the temp. sensor?

NeCrOmAnCeR · 05-31-2004, 11:14 AM

That all depends on how fast you are!!

J/K

It would be better if you just put a pail under the radiator and open the pet-cock and let it drain till it stops. That way you can control where all the antifreeze goes. Install the sensor/switch and refill the system.

78SilveradoSWB · 05-31-2004, 01:47 PM

Eric:

Sent you an email with an attached wiring diagram (hand drawn) by a Product Technician with Painless Wiring. It is for a dual fan setup with a manual overide switch. Requires a total of 3 relays and a SPST switch. Diagram was too big to post. Good Luck!

ocbaud · 05-31-2004, 07:23 PM

Quote:

Originally Posted by 78SilveradoSWB

Eric:

Sent you an email with an attached wiring diagram (hand drawn) by a Product Technician with Painless Wiring. It is for a dual fan setup with a manual overide switch. Requires a total of 3 relays and a SPST switch. Diagram was too big to post. Good Luck!

thats not the diagram i was referring too, but thanks a bunch!

i'll have to rearange it cause i dont use the A/C though

*1972C10* · 05-31-2004, 06:35 PM

I Have mine on Ign only via a bosch 30 amp relay I have thought about doing the thermal thing But on when the engine is on is fine by me.

ocbaud · 05-31-2004, 07:22 PM

Quote:

Originally Posted by 1972C10

I Have mine on Ign only via a bosch 30 amp relay I have thought about doing the thermal thing But on when the engine is on is fine by me.

over half the time i dont even need the fans on.

*1972C10* · 05-31-2004, 07:25 PM

Quote:

Originally Posted by ocbaud

over half the time i dont even need the fans on.

Yea but Im cheap and dont want to buy a thermostatic kit i have eyeballed the water pump kit in jegs the one where the sender screws in the head It would be ok..

It would be a cold day in hell when i put one of those cheesy ones that you stick in the rows of the radiator on my rig.

I just like the convience of not having to remeber to turn the fans on so i have mine to where if the engine is running so are the fans.

Cheap protection against Forgetfullness

05-28-2004, 12:41 AM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	dual fan wiring diagram? i need the diagram to hookup a fan controller to dual fans. i also need to know of a place to buy a 30a relay. would autozone sell them?

05-28-2004, 10:32 AM	#2
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Eric....why dont you listen to me?? damn..Go to O Reillys. Get the 2 Hayden Fans, the Hayden electronic controller, Wire them as they tell you in the directions and be done with it! Under 170 bux for all of it! With a lifetime warranty. WOrks great and looks great. Very simple __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

05-28-2004, 11:25 AM	#4
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Retard...go to O reilly and ask for a copy of them, They can make you a copy of them with the Fax machine on copy mode. DUH! Friggin Tool! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

05-29-2004, 12:51 PM	#5
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Cat Fight!!!!! __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

05-31-2004, 01:47 PM	#10
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	Eric: Sent you an email with an attached wiring diagram (hand drawn) by a Product Technician with Painless Wiring. It is for a dual fan setup with a manual overide switch. Requires a total of 3 relays and a SPST switch. Diagram was too big to post. Good Luck! __________________ Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400

05-28-2004, 10:38 AM	#3
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i already have the two freakin hayden fans fool. they are already hooked up to a on/off toggle swtich. i just lost the instructions so i needed them posted fool

05-30-2004, 10:08 PM	#6
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Het it sounds to me that you already have a dual fan control. flip the switch and they come on, flip the switch again and they go off. Life is simple, isn't it?

05-30-2004, 10:51 PM	#7
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i remember seeing a couple diagrams online to wire it up. i would really love to find those again. i found the instructions with the hayden fans, but they dont detail it very well.

05-30-2004, 10:53 PM	#8
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	oh yeah, how much coolant is gonna come out when i take a plug out of the head to install the temp. sensor?

05-31-2004, 11:14 AM	#9
NeCrOmAnCeR Registered User Join Date: Feb 2004 Location: Hodgenville, Ky Posts: 735	That all depends on how fast you are!! J/K It would be better if you just put a pail under the radiator and open the pet-cock and let it drain till it stops. That way you can control where all the antifreeze goes. Install the sensor/switch and refill the system.

05-31-2004, 06:35 PM	#12
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	I Have mine on Ign only via a bosch 30 amp relay I have thought about doing the thermal thing But on when the engine is on is fine by me.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.