Parting out a 69 3/4 GMC Long and Wide - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rakort · 05-29-2004, 11:47 PM

Bought a donor truck. It will donate to my 68 C10 the 350 Engine, rad, steering column, TH350, cross member, drive shaft, sway bar, and a few other things I'm sure.

Basically the rest of it is up for grabs. Body is pretty though including the bed...no tailgate. It is located in Neenah WI. Let me know if there is anything I can help with.

longhorn70gmc · 05-30-2004, 02:10 AM

Hello Rakort,
By chance does it have any 3/4 ton GMC hubcaps with the black star in the middle? Looking for Stainless or regular steel painted ones. Thanks,
Longhorn70gmc

craigg1 · 05-30-2004, 08:53 AM

What kind of condition are the doors in?

Rakort · 05-30-2004, 09:56 AM

Sorry guys, no hub caps and the doors are pretty much junk. BTW this is a Camper Special Truck what ever that means. The Hood is the only panel worth re-using.

No3Fan4Ever · 05-30-2004, 04:02 PM

Rakort,
Any mirrors left? I am looking for the medium size camper mirrors; they would be smaller than these ugly things.........

longhorn70gmc · 05-30-2004, 04:21 PM

Rakort,
Bummer on the caps, but thanks anyway.
Longhorn70gmc

Jerrys1stgJimmy · 06-02-2004, 02:45 AM

hows the front clip?

Rakort · 06-02-2004, 07:39 AM

Bumper is decent except a twist, hood is good, fenders are ? and at least one has been changed already. The grill is straight, but has some surface rust on the bottom. I'd rate it fair overall.

67ChevyC10Stepside · 06-02-2004, 09:13 AM

if it was a camper truck it probably has desirable rear gears......you should check that..

Rakort · 06-02-2004, 10:18 PM

I believe it was a camper special. What are the desirable gears / rearends? A particular ratio?

Thanks
Rakort

OhioDan · 06-04-2004, 05:14 PM

Brown seat belts?

05-29-2004, 11:47 PM	#1
Rakort Registered User Join Date: Jul 2001 Location: Neenah, WI Posts: 327	Parting out a 69 3/4 GMC Long and Wide Bought a donor truck. It will donate to my 68 C10 the 350 Engine, rad, steering column, TH350, cross member, drive shaft, sway bar, and a few other things I'm sure. Basically the rest of it is up for grabs. Body is pretty though including the bed...no tailgate. It is located in Neenah WI. Let me know if there is anything I can help with.

05-30-2004, 02:10 AM	#2
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Donor Truck Hello Rakort, By chance does it have any 3/4 ton GMC hubcaps with the black star in the middle? Looking for Stainless or regular steel painted ones. Thanks, Longhorn70gmc __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

05-30-2004, 04:02 PM	#5
No3Fan4Ever Running on empty Join Date: Aug 2002 Location: Roanoke, Virginia Posts: 1,033	Rakort, Any mirrors left? I am looking for the medium size camper mirrors; they would be smaller than these ugly things......... Attached Images __________________ _____________________________________________ Tim We have two rules here at the Rock. Rule #1: No writing on the walls. Rule#2: Obey all rules 70 GMC Sierra Grande "Custom Camper" Longhorn 402 Big Block TH400 PS PB factory AC Posi; 94 Bronco XLT 302, auto;worn out daily driver

05-30-2004, 04:21 PM	#6
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Hubcaps! Rakort, Bummer on the caps, but thanks anyway. Longhorn70gmc __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

06-02-2004, 09:13 AM	#9
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	if it was a camper truck it probably has desirable rear gears......you should check that.. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

05-30-2004, 08:53 AM	#3
craigg1 Registered User Join Date: Jun 2003 Location: Beaumont, Tx Posts: 281	What kind of condition are the doors in?

05-30-2004, 09:56 AM	#4
Rakort Registered User Join Date: Jul 2001 Location: Neenah, WI Posts: 327	Sorry guys, no hub caps and the doors are pretty much junk. BTW this is a Camper Special Truck what ever that means. The Hood is the only panel worth re-using.

06-02-2004, 02:45 AM	#7
Jerrys1stgJimmy Registered User Join Date: Jul 2003 Location: Littleton, CO Posts: 34	hows the front clip?

06-02-2004, 07:39 AM	#8
Rakort Registered User Join Date: Jul 2001 Location: Neenah, WI Posts: 327	Bumper is decent except a twist, hood is good, fenders are ? and at least one has been changed already. The grill is straight, but has some surface rust on the bottom. I'd rate it fair overall.

06-02-2004, 10:18 PM	#10
Rakort Registered User Join Date: Jul 2001 Location: Neenah, WI Posts: 327	I believe it was a camper special. What are the desirable gears / rearends? A particular ratio? Thanks Rakort

06-04-2004, 05:14 PM	#11
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Brown seat belts? __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.