|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
06-02-2004, 10:41 PM
|
#1 |
|
senior member
Join Date: Feb 2003
Location: fort macleod alberta
Posts: 2,770
|
saginaw 4 speed shifter ideas ?
Im in the process of getting the 4 speed saginaw put into my truck but all the after market shifters I can get are too far back and they will hit the seat any one else have any ideas for me
__________________
69 GMC bagged |
|
|
|
06-02-2004, 10:43 PM
|
#2 |
|
Seasonal Poster
Join Date: Apr 2002
Location: Kelowna BC Canada
Posts: 896
|
I have a saginaw, and yes it was bent really far back, so I heated it with a torch and bent it forward...pretty ghetto, but the shifter boot covers it anyways
__________________
67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW |
|
|
|
|
06-02-2004, 11:09 PM
|
#3 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
i have also heated & bent, or cut & rewelded shifter handles.....its not ghetto, it "backyard tech"
 the shifter handle in my longhorn was made from a chunk of 1/2" x 1" flat steel(its not chrome, but works nice). i have heard that guys have used a hurst comp plus shifter for a 57 Belair to fit the bench seat in the truck! i havent tryed it myself, so maybe someone will chime in with details. Best of luck,crazyL 
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
06-02-2004, 11:23 PM
|
#4 |
|
senior member
Join Date: Feb 2003
Location: fort macleod alberta
Posts: 2,770
|
well I wanted to "backyard tech" one too but was advised not too, what do you guys think og cutting up and S-10 shifter and welding some flat iron on it so it can bolt to the shifter?
__________________
69 GMC bagged |
|
|
|
|
06-02-2004, 11:36 PM
|
#5 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
If you are a welder, i dont see why not.....i havent had any problems with modified shifter handles. Just grab one that pretty much fits the seat, & weld the flat iron on with 2 holes in it to mount it
crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
06-02-2004, 11:39 PM
|
#6 |
|
Seasonal Poster
Join Date: Apr 2002
Location: Kelowna BC Canada
Posts: 896
|
Just get a shifter boot and all is well...the difference between bending and buying will not be noticeable unless you are taking your truck to some concourse show, then you might lose some points
__________________
67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW |
|
|
|
|
06-03-2004, 09:33 PM
|
#7 |
|
senior member
Join Date: Feb 2003
Location: fort macleod alberta
Posts: 2,770
|
how about some pics of shifters u guys have in ur trucks
__________________
69 GMC bagged |
|
|
|
|
06-04-2004, 10:23 AM
|
#8 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
I do have a couple shots of the shifter, & also the Richmond trans from the top (center hump out of the floor)......but i need to upload them yet. crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
