|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
06-15-2004, 01:53 AM
|
#1 |
|
Young truck fanatic
Join Date: Jun 2003
Location: The wonderful Mat-Su Valley....Palmer, Ak
Posts: 253
|
4 speed shifter placement??
Will a M20/M21/M22, Borg Warner, or T10, ect....shifter go through the stock hole location of granny geared high hump floor?
(I plan on having a 4 spd Non-granny geared transmission soon)  Thanks
__________________
'67 Chevy Longstep 2wd 350 w/4spd manual Muncie M21. My first project. **Proud to be Valley Trash** |
|
|
|
06-15-2004, 06:40 AM
|
#2 |
|
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
Since the granny gear shifter is located in the middle front of the transmission and the four speeds like the Muncies have the shifter located on the tailshaft it will not locate in the stock hole location.
I would guess that the shifter on the Muncies is approximately 10" closer to the seat. Jim |
|
|
|
|
06-15-2004, 03:43 PM
|
#3 |
|
Registered User
Join Date: Jul 2000
Location: Chandler, Arizona, USA
Posts: 299
|
Won't go into the stock location un-fortunately...sorry.
Douglas.
__________________
-1968 Chevy SWB = Frame Off/383/Muncie Car 4 speed -1968 Chevy SWB = numbers matching 307/Truck 4 speed. -1966 Chevy II = 2 door No Post/130,000 Orig miles/230 6cyl/powerglide/Vintage AC -1972 Chevy Nova = 2 door/412 Small Block -1927 Ford Roadster = Homebuilt/widened 8"/350/ Custom Everything. |
|
|
|
|
06-15-2004, 08:57 PM
|
#4 |
|
Young truck fanatic
Join Date: Jun 2003
Location: The wonderful Mat-Su Valley....Palmer, Ak
Posts: 253
|
Jefe i pm'd you some questions
__________________
'67 Chevy Longstep 2wd 350 w/4spd manual Muncie M21. My first project. **Proud to be Valley Trash** |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
