tuneport injection setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ronsk10 · 07-03-2004, 02:23 AM

I have a complete TPI setup includes everything except ECM, harness, and fuel pump 275.00

*Shane* · 07-03-2004, 10:44 AM

305 or 350 setup?

ronsk10 · 07-03-2004, 03:50 PM

I was told a 350 but not positive. but the only difference is injector size so it can be used on either. Thanks

mocwon · 07-03-2004, 05:40 PM

What year (Mass Air Flow or Speed Density)? If it's MAF do you have the MAF sensor? Thanks

68 chevy truck-TPI · 07-03-2004, 06:18 PM

looks like a MAF setup. there is no hole in the back corner of the plenum were the MAP bracket mounts. if he can get the #'s off of the injectors the plenum and intake base i can tell you more about it. it also has the cold start injector that was not used on the MAP setup.

i took another look at it and it does not have a place for the EGR feed tube . and the fuel rail has the lines that turn out to the drivers side so it has to be an F-body setup off of a camaro or firebird/trans am. corvete lines turn down and to the passenger side. it is probally a 85-88 305 setup that intake base will bolt to old style heads without modification but the center holes will have to be modified if you want to use this on center bolt valve cover heads.

meathead95 · 07-03-2004, 07:58 PM

i was told the runners on the 350's where slightly bigger also

71swb4x4 · 07-03-2004, 10:26 PM

The runners on 305 and 350 are the same size.
The intake up to and including 1986 will bolt to the older style heads. After 1986 they were the new style heads.

ronsk10 · 07-05-2004, 03:23 AM

It is indeed a maf setup. Thanks for the answers guys. any questions let me know. Thanks

camaro__thunder · 07-05-2004, 05:15 AM

I dont mean to steal this thread but I have the wiring harness, ecm, and possibly the MAF to complete the system.. if anyone buys rons setup. thanks

ronsk10 · 07-07-2004, 12:21 AM

make offer

jorgensensc · 07-07-2004, 07:06 PM

PM sent to both camaro thunder and ronsk10.

ronsk10 · 07-13-2004, 12:49 AM

ttt

ronh72c10 · 07-13-2004, 10:07 AM

Sent a PM to both ronsk10 and camaro_thunder.

Ron

07-03-2004, 02:23 AM	#1
ronsk10 Registered User Join Date: Jun 2003 Location: Scotland Neck NC Posts: 316	tuneport injection setup I have a complete TPI setup includes everything except ECM, harness, and fuel pump 275.00 Attached Images

07-03-2004, 05:40 PM	#4
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	What year (Mass Air Flow or Speed Density)? If it's MAF do you have the MAF sensor? Thanks __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

07-03-2004, 06:18 PM	#5
68 chevy truck-TPI A WORK IN PROGRESS Join Date: Apr 2004 Location: toccoa, georgia Posts: 205	looks like a MAF setup. there is no hole in the back corner of the plenum were the MAP bracket mounts. if he can get the #'s off of the injectors the plenum and intake base i can tell you more about it. it also has the cold start injector that was not used on the MAP setup. i took another look at it and it does not have a place for the EGR feed tube . and the fuel rail has the lines that turn out to the drivers side so it has to be an F-body setup off of a camaro or firebird/trans am. corvete lines turn down and to the passenger side. it is probally a 85-88 305 setup that intake base will bolt to old style heads without modification but the center holes will have to be modified if you want to use this on center bolt valve cover heads. Last edited by 68 chevy truck-TPI; 07-03-2004 at 07:01 PM.

07-03-2004, 07:58 PM	#6
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	i was told the runners on the 350's where slightly bigger also __________________ 72 2wd blazer 72 swb 4x4

07-03-2004, 10:26 PM	#7
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	The runners on 305 and 350 are the same size. The intake up to and including 1986 will bolt to the older style heads. After 1986 they were the new style heads. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

07-03-2004, 10:44 AM	#2
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	305 or 350 setup?

07-03-2004, 03:50 PM	#3
ronsk10 Registered User Join Date: Jun 2003 Location: Scotland Neck NC Posts: 316	I was told a 350 but not positive. but the only difference is injector size so it can be used on either. Thanks

07-05-2004, 03:23 AM	#8
ronsk10 Registered User Join Date: Jun 2003 Location: Scotland Neck NC Posts: 316	It is indeed a maf setup. Thanks for the answers guys. any questions let me know. Thanks

07-05-2004, 05:15 AM	#9
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	tpi parts I dont mean to steal this thread but I have the wiring harness, ecm, and possibly the MAF to complete the system.. if anyone buys rons setup. thanks

07-07-2004, 12:21 AM	#10
ronsk10 Registered User Join Date: Jun 2003 Location: Scotland Neck NC Posts: 316	make offer

07-07-2004, 07:06 PM	#11
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	PM sent to both camaro thunder and ronsk10. __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-13-2004, 12:49 AM	#12
ronsk10 Registered User Join Date: Jun 2003 Location: Scotland Neck NC Posts: 316	ttt

07-13-2004, 10:07 AM	#13
ronh72c10 Senior Member Join Date: Jul 2003 Location: Mount Forest, Ontario, Canada Posts: 978	Sent a PM to both ronsk10 and camaro_thunder. Ron __________________ 72 Chevy C10 (rust repaired, starting body work) 72 GMC 3/4ton 4x4 72 Chevy C20 Suburban 38 Ford Tudor Humpback Sedan (from the darkside) 67 Pontiac Parisienne 55 Studebaker Commander 2dr Hardtop (Starliner) My Youtube channel with Video Updates!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.