WTB: Passenger Side Ram Horn!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jorgensensc · 07-17-2004, 05:16 PM

O.K. My passenger side manifold developed a crack last week.

I've been hunting down the exhaust leak and finally found it. Now I need a passenger side Ram Horn Manifold. My ram horn is off a 72 chevy 350 2 wheel drive with the angle outlet. It also has the AIR injection holes too (although they are plugged). For uniformity's sake I would like the same type, but I understand I can't be too picky. The closer you are to Houston the better, Shipping is going to be killer I'm sure. Thanks in advance Guys!

Shawn

Vince M · 07-17-2004, 05:38 PM

I've bought a center dump and an angle dump off of eBay for cheap. I don't think I paid more than ten or twelve bucks plus shipping.

jorgensensc · 07-17-2004, 07:45 PM

Thanks for the heads up. I will check there next. I just wanted a chance to get one from a board member, kinda keepin' the money in the family

Shawn

68 chevy truck-TPI · 07-17-2004, 09:09 PM

i may have what you need. i have a passenger side ram horn with the tubes in them. i can not remember if it has the angled outlet i will have to look when i get to work monday. i think the came off a 283. i have the part# marked in my part code book, the # is 3896956 they are listed as a 67-68 truck 283/327.

HuggerCST · 07-17-2004, 10:43 PM

If that doesn't work out, I have one without the air holes from a '70 350 2wd in north La. $20 plus shipping?

jorgensensc · 07-17-2004, 11:25 PM

Thanks guys!
I think I've got one lined up through Member Bisquik65. I appreciate the rapid responses!!!
Shawn

jorgensensc · 07-18-2004, 10:55 AM

Here are some pics of what I have currently, along with the GM part number on them and a pic of the Beautiful crack. Thanks again Bisquik65!

07-17-2004, 05:16 PM	#1
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	WTB: Passenger Side Ram Horn!!!! O.K. My passenger side manifold developed a crack last week. I've been hunting down the exhaust leak and finally found it. Now I need a passenger side Ram Horn Manifold. My ram horn is off a 72 chevy 350 2 wheel drive with the angle outlet. It also has the AIR injection holes too (although they are plugged). For uniformity's sake I would like the same type, but I understand I can't be too picky. The closer you are to Houston the better, Shipping is going to be killer I'm sure. Thanks in advance Guys! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-17-2004, 05:38 PM	#2
Vince M Senior Member Join Date: Apr 2000 Location: Orlando, FL Posts: 1,076	I've bought a center dump and an angle dump off of eBay for cheap. I don't think I paid more than ten or twelve bucks plus shipping. __________________ ............................................................ 68 Chevy CST SWB w/LS1, carb & 700r4. Golden Anniversary clone with a few improvements.

07-17-2004, 07:45 PM	#3
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Thanks for the heads up. I will check there next. I just wanted a chance to get one from a board member, kinda keepin' the money in the family Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-17-2004, 10:43 PM	#5
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	If that doesn't work out, I have one without the air holes from a '70 350 2wd in north La. $20 plus shipping? __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

07-17-2004, 11:25 PM	#6
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Thanks guys! I think I've got one lined up through Member Bisquik65. I appreciate the rapid responses!!! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-17-2004, 09:09 PM	#4
68 chevy truck-TPI A WORK IN PROGRESS Join Date: Apr 2004 Location: toccoa, georgia Posts: 205	i may have what you need. i have a passenger side ram horn with the tubes in them. i can not remember if it has the angled outlet i will have to look when i get to work monday. i think the came off a 283. i have the part# marked in my part code book, the # is 3896956 they are listed as a 67-68 truck 283/327.

07-18-2004, 10:55 AM	#7
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Here are some pics of what I have currently, along with the GM part number on them and a pic of the Beautiful crack. Thanks again Bisquik65! Attached Images __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.