6" front springs & rear blocks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

btrailers · 07-17-2004, 07:42 PM

I have recently purchased a 79 3/4 ton chevy 4x4. It had a lift in it that I took out. I am trying to sell the lift and the truck. Have 6" springs out of the front and blocks and an overload spring from the rear. I do not have shocks, and I used the u-bolts. This lift has less than 500 miles on it. I would like to get 200 obo. Buyer pays shipping

soleeagle · 07-18-2004, 12:39 AM

Where are you located at? And what would shipping be to 46176?

rich-white · 07-18-2004, 01:45 PM

Would be interested in also. Need to know what shipping is to 63129 and where are you located? If close might pick up.

btrailers · 07-19-2004, 10:03 PM

I am located in north iowa zip code 50653. I will have to weigh the springs to know shipping exactly. Will try to get that done this week sometime

btrailers · 07-25-2004, 12:47 AM

The front springs weigh 50lbs each and are 48"long and about 10 tall I am guessing around 140lbs for everything. Will probly need to b shipped in two packages

rich-white · 07-25-2004, 11:05 AM

do you have the steering arm for the lift also or what all comes with the kit?

btrailers · 07-25-2004, 11:46 PM

You get the front springs and u-bolts and the rear blocks. I am using the back u-bolts but am planning on changing them too. I also left the overloads in the rear. Sorry no steering arm either. So I guess two blocks two springs and front u-bolts

07-17-2004, 07:42 PM	#1
btrailers Registered User Join Date: May 2004 Posts: 27	6" front springs & rear blocks I have recently purchased a 79 3/4 ton chevy 4x4. It had a lift in it that I took out. I am trying to sell the lift and the truck. Have 6" springs out of the front and blocks and an overload spring from the rear. I do not have shocks, and I used the u-bolts. This lift has less than 500 miles on it. I would like to get 200 obo. Buyer pays shipping

07-18-2004, 12:39 AM	#2
soleeagle Registered User Join Date: Sep 2003 Location: Shelbyville, Indiana Posts: 614	Where are you located at? And what would shipping be to 46176? __________________ Chuck '85 Chevy Silverado 4X4 '91 Chevy 4X4 Suburban http://www.cardomain.com/memberpage/545941

07-19-2004, 10:03 PM	#4
btrailers Registered User Join Date: May 2004 Posts: 27	Location I am located in north iowa zip code 50653. I will have to weigh the springs to know shipping exactly. Will try to get that done this week sometime

07-25-2004, 12:47 AM	#5
btrailers Registered User Join Date: May 2004 Posts: 27	weighed springs The front springs weigh 50lbs each and are 48"long and about 10 tall I am guessing around 140lbs for everything. Will probly need to b shipped in two packages

07-25-2004, 11:05 AM	#6
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	do you have the steering arm for the lift also or what all comes with the kit? Last edited by rich-white; 07-25-2004 at 11:05 AM. Reason: mispelled word

07-18-2004, 01:45 PM	#3
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Would be interested in also. Need to know what shipping is to 63129 and where are you located? If close might pick up.

07-25-2004, 11:46 PM	#7
btrailers Registered User Join Date: May 2004 Posts: 27	springs You get the front springs and u-bolts and the rear blocks. I am using the back u-bolts but am planning on changing them too. I also left the overloads in the rear. Sorry no steering arm either. So I guess two blocks two springs and front u-bolts



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.