Moving!! Must Sell- 1970 Jimmy 4wd - The 1947 - Present Chevrolet & GMC Truck Message Board Network

J.Lance · 07-22-2004, 10:46 AM

SALE PENDING...

Relocating to Idaho and unfortunately I need some funds to assist with that and can't take all of the vehicles with me.

1970 GMC Jimmy 4wd, 350 4spd. Runs excellent, I've been using it as my daily driver for the past 4 months and have not had a problem. Only reason I'm selling is to finance the 93 big block suburban I just picked up yesterday (need a better tow vehicle for the move).

Jimmy is very straight. Paint shows pretty well but has some clear coat peeling in spots. Only rust is in the passenger rocker and a small spot on the top of the driver rocker near the weather stripping. I have crawled all over this thing and have also had the rocker box rear covers off. There is no other rust.

Before I started using it as a DD, I completely went through the wiring under the dash and engine compartment. The hacked up under the dash harness was replaced with a very nice uncut harness. Everything operates as it should.

Edelbrock 1406 and a HEI ignition top off the motor and it runs great.

Transmission was rebuilt Novemeber of last year and is tight.

Wheels are Mickey Thompson Classic (not the cheaper Classic IIs) with BFG 31" a/t tires (50%)

New dash pad installed and I have new carpet (front portion) to put in but haven't yet and will not have time.

Yes, I realize pictures will help and I'll have some posted tonight.

I need to get $4500 or best offer, I have over $5K into it at this point. Somebody help me out! I'm leaving in less than two weeks!

I'd be happy to offer up additional pics, just make the request and be specific. Had it shined up but needs washed!

bouncytruck · 07-22-2004, 11:12 AM

Sorry to see your seling it. Of course, pictures always help.

1972_K5 · 07-22-2004, 12:08 PM

Where at in Idaho are you moving to?

J.Lance · 07-22-2004, 03:22 PM

Quote:

Originally Posted by bouncytruck

Sorry to see your seling it. Of course, pictures always help.

Thanks for the condolences, as mentioned in the ad, I'll get some pics up tonight.

ChevyDude · 07-22-2004, 06:49 PM

What????? Moving?????

J.Lance · 07-22-2004, 07:23 PM

Quote:

Originally Posted by ChevyDude

What????? Moving?????

Yep! Sorry I haven't called but as you can guess, I've been a little busy. Came up pretty quick and now I've got to act fast. I still need to get up and see the truck. How's the progress. I still need the manifolds too so I hope you haven't given up on me. I'll give you a call.

ChevyDude · 07-22-2004, 07:27 PM

Home 303 657-0717
Cell 303 518-2114

stelth2002 · 07-22-2004, 12:12 PM

K5, hes moving to the IF area is what he told me.

1972_K5 · 07-22-2004, 12:15 PM

OMG! Will that now make 3 or 4 of us from Idaho?...

stelth2002 · 07-22-2004, 12:17 PM

K5, i know there used to be a guy in the sandpoint area and theres a guy in lewistink area that has one like ours and has a 500 caddy in it. But i agree... we could be the smallest population state on the board.

J.Lance · 07-22-2004, 03:20 PM

Glad to see I can help boost the Idaho chevy truck population. If anyone between Colorado and Idaho wants this Jimmy, I could probably work out some delivery. And you bet, Idaho Falls will now be home sweet home! The sad part is I've really formed some great relationships with truck guys in my area but I'll look foward to forming some more!

GMC AMI · 08-07-2004, 06:02 AM

Quote:

Originally Posted by stelth2002

K5, i know there used to be a guy in the sandpoint area and theres a guy in lewistink area that has one like ours and has a 500 caddy in it. But i agree... we could be the smallest population state on the board.

Hi, not to break your bubble or jump on the thread, I think there is only 3 in the whole State of Maine. If anyone Knows diff. please respond I would not
mind a little get together except I do not know if there are enough members
with out including New England States. Very nice Blazer, makes me want one for my little collection, good luck on your sale! Mike

J.Lance · 07-27-2004, 11:20 AM

Any interest or offers?? Needs to go away.

H0BBEZ · 08-02-2004, 01:11 PM

Is this still for sale? Any interior pictures?

J.Lance · 08-03-2004, 07:07 PM

Quote:

Originally Posted by H0BBEZ

Is this still for sale? Any interior pictures?

Sent you a pm over on ColoradoK5

ChevyDude · 08-03-2004, 07:21 PM

I've got a set of Ram Horn manifolds that I would like to trade for the 68' K-10.

J.Lance · 08-04-2004, 02:40 PM

Quote:

Originally Posted by ChevyDude

I've got a set of Ram Horn manifolds that I would like to trade for the 68' K-10.

Well.....that's the best offer I've gotten yet! How's the 2wd coming along? Got it on the road yet?

toolman · 08-05-2004, 08:16 AM

Hey, sorry to hear your having to get rid of that Blazer. Don't check the board all that often lately...been to busy taking advantage of the nice weather...just happened to see your post
Just wanted to say thanks again for all your help in buying that Blazer from Marvin a while back. What is the price on your Blazer ? I kinda remember seeing it when we were there. ?
Buddy of mine might be interested....how long yet till you move ?

07-22-2004, 10:46 AM	#1
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	Moving!! Must Sell- 1970 Jimmy 4wd, pics added SALE PENDING... Relocating to Idaho and unfortunately I need some funds to assist with that and can't take all of the vehicles with me. 1970 GMC Jimmy 4wd, 350 4spd. Runs excellent, I've been using it as my daily driver for the past 4 months and have not had a problem. Only reason I'm selling is to finance the 93 big block suburban I just picked up yesterday (need a better tow vehicle for the move). Jimmy is very straight. Paint shows pretty well but has some clear coat peeling in spots. Only rust is in the passenger rocker and a small spot on the top of the driver rocker near the weather stripping. I have crawled all over this thing and have also had the rocker box rear covers off. There is no other rust. Before I started using it as a DD, I completely went through the wiring under the dash and engine compartment. The hacked up under the dash harness was replaced with a very nice uncut harness. Everything operates as it should. Edelbrock 1406 and a HEI ignition top off the motor and it runs great. Transmission was rebuilt Novemeber of last year and is tight. Wheels are Mickey Thompson Classic (not the cheaper Classic IIs) with BFG 31" a/t tires (50%) New dash pad installed and I have new carpet (front portion) to put in but haven't yet and will not have time. Yes, I realize pictures will help and I'll have some posted tonight. I need to get $4500 or best offer, I have over $5K into it at this point. Somebody help me out! I'm leaving in less than two weeks! I'd be happy to offer up additional pics, just make the request and be specific. Had it shined up but needs washed! Attached Images __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!) Last edited by J.Lance; 08-17-2004 at 09:37 AM. Reason: sale pending

07-22-2004, 11:12 AM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Sorry to see your seling it. Of course, pictures always help. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

07-22-2004, 12:08 PM	#3
1972_K5 Registered User Join Date: Apr 2004 Location: Nampa, Idaho Posts: 119	Where at in Idaho are you moving to? __________________ 1972 K5 CST

07-22-2004, 06:49 PM	#5
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	What????? Moving????? __________________ Alex 1971 Lil' Red 350 SBC 700R4

07-22-2004, 07:27 PM	#7
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Home 303 657-0717 Cell 303 518-2114 __________________ Alex 1971 Lil' Red 350 SBC 700R4

07-22-2004, 12:12 PM	#8
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	K5, hes moving to the IF area is what he told me. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-22-2004, 12:15 PM	#9
1972_K5 Registered User Join Date: Apr 2004 Location: Nampa, Idaho Posts: 119	OMG! Will that now make 3 or 4 of us from Idaho?... __________________ 1972 K5 CST

07-22-2004, 12:17 PM	#10
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	K5, i know there used to be a guy in the sandpoint area and theres a guy in lewistink area that has one like ours and has a 500 caddy in it. But i agree... we could be the smallest population state on the board. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-22-2004, 03:20 PM	#11
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	Glad to see I can help boost the Idaho chevy truck population. If anyone between Colorado and Idaho wants this Jimmy, I could probably work out some delivery. And you bet, Idaho Falls will now be home sweet home! The sad part is I've really formed some great relationships with truck guys in my area but I'll look foward to forming some more! __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

07-27-2004, 11:20 AM	#13
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	Any interest or offers?? Needs to go away. __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

08-02-2004, 01:11 PM	#14
H0BBEZ Registered User Join Date: Dec 2003 Location: Frederick, CO Posts: 1	Is this still for sale? Any interior pictures?

08-03-2004, 07:21 PM	#16
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	I've got a set of Ram Horn manifolds that I would like to trade for the 68' K-10. __________________ Alex 1971 Lil' Red 350 SBC 700R4

08-05-2004, 08:16 AM	#18
toolman Registered User Join Date: Mar 2004 Location: Hutchinson, KS Posts: 10	Hey, sorry to hear your having to get rid of that Blazer. Don't check the board all that often lately...been to busy taking advantage of the nice weather...just happened to see your post Just wanted to say thanks again for all your help in buying that Blazer from Marvin a while back. What is the price on your Blazer ? I kinda remember seeing it when we were there. ? Buddy of mine might be interested....how long yet till you move ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.