Can someone give me interior tips

[me3]

id like some interior tips like door panels headliner counsel best place to mount sub and other speakers. what it takes to cut radio hole out

[68w/sbc406]

i have two 3 inch speakers mounted where the dash speaker is and 2 6x9s under the seat. doesnt sound to bad. as for the sub, either move your gas tank under your bed to free up some behind the seat room, or i think there is a solo barick(spelling?) that needs hardly any air space that you might beable to make a box for and stuff under the seat. as for the hole in the dash, you just need the deck sleeve to mark how big it is on the dash and cut nicely with a sawzall. my deck isnt as wide as the two knob holes so they will show out the side of the deck if you dont have a plastic beauty ring around it.

[stickshift_or_walk]

Originally Posted by 68w/sbc406

i have two 3 inch speakers mounted where the dash speaker is ...

Ok, that's what I'm looking for. Someone who's done that and can recommend materials, dimensions, and attachement method for the under dash mounting of decent (but small) speakers. sbc406 - can you help?

Thanks...SSOW

[68w/sbc406]

Originally Posted by stickshift_or_walk

Ok, that's what I'm looking for. Someone who's done that and can recommend materials, dimensions, and attachement method for the under dash mounting of decent (but small) speakers. sbc406 - can you help?

Thanks...SSOW

well i found a set of new delco speakers in my dads shop and i took some machine screws and nuts and bolted them through the grill in the dash. not high quality speakers but they sound better than just the 6x9s, and not an incogneato mounting but you can only see it through the windshield. i can post some pictures later tonight if you would like.

[stickshift_or_walk]

I like fixes like that - practical and effective, not to mention cheap (the good kind). However, we're kinda sprucin' this one up, so we're looking for something similar to the factory setup...but I don't have one of those so I don't know how it attached. Anyway, a method that doesn't require putting hardware up through the dash sheetmetal or grille.

I was goofing around at the local farm & ranch store, and saw 4x8 sheets of white PVC in various thicknesses - 1/8 all the way up to 1/2 or so. Not sure what they're for, but I thought it might make a good base for this mount, if I can figure out how to hang it.

That's as far as I've gotten...SSOW

[68w/sbc406]

well it aint too noticable. i am not sure how the factory speaker hooks up. mine had no radio, no lighter, I6 250, and a 4 speed. its like the civic DX for the 67-72 truck world

[Mudder]

Mark the dash and cut carefully..........No mistakes!!!!!!!! Lots of guys don't like the idea but I love the sound of 6x9's in the doors.

[cdowns]

best interior tip i have is that when those metal things in the seat start pokin you in the butt and drawing blood it's time to get new seats

[me3]

thanks guys im relocating the gas tank so that should be no ploblemcutting holes in the doors doesnt bother me. i think i will try to fill in the circles first so the gap doesnt show.

yes that sounds like a good time to get a new seat

[me3]

has anyone build a counsel?

[me3]

Still looking on how to build a counsel pics would be great

[Inspector722]

Has your truck already been painted?If it has not, I have a couple very nice doors with only a littlesurface rust that I can swap someone before they cut holes in there nice doors. Mine have the 4x6 holes (I think) in them that some else had cut.